2020-09-23 01:29:43

by Icenowy Zheng

[permalink] [raw]
Subject: [PATCH] regulator: axp20x: fix LDO2/4 description

Currently we wrongly set the mask of value of LDO2/4 both to the mask of
LDO2, and the LDO4 voltage configuration is left untouched. This leads
to conflict when LDO2/4 are both in use.

Fix this issue by setting different vsel_mask to both regulators.

Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Icenowy Zheng <[email protected]>
---
drivers/regulator/axp20x-regulator.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 1bacb37e8a99..cd1224182ad7 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -42,8 +42,9 @@

#define AXP20X_DCDC2_V_OUT_MASK GENMASK(5, 0)
#define AXP20X_DCDC3_V_OUT_MASK GENMASK(7, 0)
-#define AXP20X_LDO24_V_OUT_MASK GENMASK(7, 4)
+#define AXP20X_LDO2_V_OUT_MASK GENMASK(7, 4)
#define AXP20X_LDO3_V_OUT_MASK GENMASK(6, 0)
+#define AXP20X_LDO4_V_OUT_MASK GENMASK(3, 0)
#define AXP20X_LDO5_V_OUT_MASK GENMASK(7, 4)

#define AXP20X_PWR_OUT_EXTEN_MASK BIT_MASK(0)
@@ -542,14 +543,14 @@ static const struct regulator_desc axp20x_regulators[] = {
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_DCDC3_MASK),
AXP_DESC_FIXED(AXP20X, LDO1, "ldo1", "acin", 1300),
AXP_DESC(AXP20X, LDO2, "ldo2", "ldo24in", 1800, 3300, 100,
- AXP20X_LDO24_V_OUT, AXP20X_LDO24_V_OUT_MASK,
+ AXP20X_LDO24_V_OUT, AXP20X_LDO2_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO2_MASK),
AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25,
AXP20X_LDO3_V_OUT, AXP20X_LDO3_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO3_MASK),
AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in",
axp20x_ldo4_ranges, AXP20X_LDO4_V_OUT_NUM_VOLTAGES,
- AXP20X_LDO24_V_OUT, AXP20X_LDO24_V_OUT_MASK,
+ AXP20X_LDO24_V_OUT, AXP20X_LDO4_V_OUT_MASK,
AXP20X_PWR_OUT_CTRL, AXP20X_PWR_OUT_LDO4_MASK),
AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100,
AXP20X_LDO5_V_OUT, AXP20X_LDO5_V_OUT_MASK,
--
2.27.0


2020-09-23 19:05:08

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH] regulator: axp20x: fix LDO2/4 description

On Wed, 23 Sep 2020 08:51:42 +0800, Icenowy Zheng wrote:
> Currently we wrongly set the mask of value of LDO2/4 both to the mask of
> LDO2, and the LDO4 voltage configuration is left untouched. This leads
> to conflict when LDO2/4 are both in use.
>
> Fix this issue by setting different vsel_mask to both regulators.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/1] regulator: axp20x: fix LDO2/4 description
commit: fbb5a79d2fe7b01c6424fbbc04368373b1672d61

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark