2020-09-23 06:40:27

by Ran Wang

Subject: [PATCH v2 1/5] Documentation: dt: binding: fsl: Add 'fsl,ippdexpcr1-alt-addr' property

From: Biwen Li <[email protected]>

The 'fsl,ippdexpcr1-alt-addr' property is used to handle an errata A-008646
on LS1021A

Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Ran Wang <[email protected]>
---
Change in v2:
- None

Documentation/devicetree/bindings/soc/fsl/rcpm.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
index 5a33619..1be58a3 100644
--- a/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
+++ b/Documentation/devicetree/bindings/soc/fsl/rcpm.txt
@@ -34,6 +34,11 @@ Chassis Version Example Chips
Optional properties:
- little-endian : RCPM register block is Little Endian. Without it RCPM
will be Big Endian (default case).
+ - fsl,ippdexpcr1-alt-addr : The property is related to a hardware issue
+ on SoC LS1021A and only needed on SoC LS1021A.
+ Must include 2 entries:
+ The first entry must be a link to the SCFG device node.
+ The 2nd entry must be offset of register IPPDEXPCR1 in SCFG.

Example:
The RCPM node for T4240:
@@ -43,6 +48,20 @@ The RCPM node for T4240:
#fsl,rcpm-wakeup-cells = <2>;
};

+The RCPM node for LS1021A:
+ rcpm: rcpm@1ee2140 {
+ compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1ee2140 0x0 0x8>;
+ #fsl,rcpm-wakeup-cells = <2>;
+
+ /*
+ * The second and third entry compose an alt offset
+ * address for IPPDEXPCR1(SCFG_SPARECR8)
+ */
+ fsl,ippdexpcr1-alt-addr = <&scfg 0x51c>;
+ };
+
+
* Freescale RCPM Wakeup Source Device Tree Bindings
-------------------------------------------
Required fsl,rcpm-wakeup property should be added to a device node if the device
--
2.7.4

2020-09-23 06:40:50

by Ran Wang

Subject: [PATCH v2 4/5] arm: dts: ls1021a: fix flextimer failed to wake system

The data of property 'fsl,rcpm-wakeup' is not corrcet, which causing
RCPM driver incorrectly program register IPPDEXPCR1, then flextimer is
wrongly clock gated during system suspend, can't send interrupt to
wake.

Signed-off-by: Ran Wang <[email protected]>
Acked-by: Li Yang <[email protected]>
---
Change in v2:
- None

arch/arm/boot/dts/ls1021a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 089fe86..e372630f 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -1014,7 +1014,7 @@
compatible = "fsl,ls1021a-ftm-alarm";
reg = <0x0 0x29d0000 0x0 0x10000>;
reg-names = "ftm";
- fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
};
--
2.7.4