2020-09-25 09:40:28

by Wong, Vee Khee

[permalink] [raw]
Subject: [PATCH net-next 0/1] net: stmmac: Enable VLAN filter fail queue for Intel platform data

This is a follow-up on a earlier patch submission at:-
https://patchwork.ozlabs.org/patch/1275604/

Changes since the previous patch submission:
- Enable VLAN fail queue for Intel platform data (dwmac-intel).
- Steer the VLAN failed packet to the last Rx queue.


Chuah, Kim Tatt (1):
net: stmmac: Add option for VLAN filter fail queue enable

drivers/net/ethernet/stmicro/stmmac/common.h | 2 ++
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 5 +++++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 15 +++++++++++++--
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
include/linux/stmmac.h | 2 ++
7 files changed, 32 insertions(+), 2 deletions(-)

--
2.17.0


2020-09-25 09:46:31

by Wong, Vee Khee

[permalink] [raw]
Subject: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable

From: "Chuah, Kim Tatt" <[email protected]>

Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
Queuing. This option allows packets that fail VLAN filter to be routed
to a specific Rx queue when Receive All is also set.

When this option is enabled:
- Enable VFFQ only when entering promiscuous mode, because Receive All
will pass up all rx packets that failed address filtering (similar to
promiscuous mode).
- VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
filters and get routed to selected VFFQ Rx queue.

Reviewed-by: Voon Weifeng <[email protected]>
Reviewed-by: Ong Boon Leong <[email protected]>
Signed-off-by: Chuah, Kim Tatt <[email protected]>
Signed-off-by: Ong Boon Leong <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 2 ++
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 5 +++++
drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 1 +
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 15 +++++++++++++--
drivers/net/ethernet/stmicro/stmmac/dwmac5.h | 6 ++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
include/linux/stmmac.h | 2 ++
7 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index cafa8e3c3573..df7de50497a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -481,6 +481,8 @@ struct mac_device_info {
unsigned int num_vlan;
u32 vlan_filter[32];
unsigned int promisc;
+ bool vlan_fail_q_en;
+ u8 vlan_fail_q;
};

struct stmmac_rx_routing {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 2ac9dfb3462c..ab0a81e0fea1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -321,6 +321,11 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
/* Set the maxmtu to a default of JUMBO_LEN */
plat->maxmtu = JUMBO_LEN;

+ plat->vlan_fail_q_en = true;
+
+ /* Use the last Rx queue */
+ plat->vlan_fail_q = plat->rx_queues_to_use - 1;
+
return 0;
}

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 61f3249bd724..592b043f9676 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -76,6 +76,7 @@
#define GMAC_PACKET_FILTER_HPF BIT(10)
#define GMAC_PACKET_FILTER_VTFE BIT(16)
#define GMAC_PACKET_FILTER_IPFE BIT(20)
+#define GMAC_PACKET_FILTER_RA BIT(31)

#define GMAC_MAX_PERFECT_ADDRESSES 128

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index ecd834e0e121..002791b77356 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -618,7 +618,18 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
value &= ~GMAC_PACKET_FILTER_PM;
value &= ~GMAC_PACKET_FILTER_PR;
if (dev->flags & IFF_PROMISC) {
- value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+ /* VLAN Tag Filter Fail Packets Queuing */
+ if (hw->vlan_fail_q_en) {
+ value = readl(ioaddr + GMAC_RXQ_CTRL4);
+ value &= ~GMAC_RXQCTRL_VFFQ_MASK;
+ value |= GMAC_RXQCTRL_VFFQE |
+ (hw->vlan_fail_q << GMAC_RXQCTRL_VFFQ_SHIFT);
+ writel(value, ioaddr + GMAC_RXQ_CTRL4);
+ value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_RA;
+ } else {
+ value = GMAC_PACKET_FILTER_PR | GMAC_PACKET_FILTER_PCF;
+ }
+
} else if ((dev->flags & IFF_ALLMULTI) ||
(netdev_mc_count(dev) > hw->multicast_filter_bins)) {
/* Pass all multi */
@@ -680,7 +691,7 @@ static void dwmac4_set_filter(struct mac_device_info *hw,

writel(value, ioaddr + GMAC_PACKET_FILTER);

- if (dev->flags & IFF_PROMISC) {
+ if (dev->flags & IFF_PROMISC && !hw->vlan_fail_q_en) {
if (!hw->promisc) {
hw->promisc = 1;
dwmac4_vlan_promisc_enable(dev, hw);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
index 3e8faa96b4d4..56b0762c1276 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.h
@@ -92,6 +92,12 @@
#define TCEIE BIT(0)
#define DMA_ECC_INT_STATUS 0x00001088

+/* EQoS version 5.xx VLAN Tag Filter Fail Packets Queuing */
+#define GMAC_RXQ_CTRL4 0x00000094
+#define GMAC_RXQCTRL_VFFQ_MASK GENMASK(19, 17)
+#define GMAC_RXQCTRL_VFFQ_SHIFT 17
+#define GMAC_RXQCTRL_VFFQE BIT(16)
+
int dwmac5_safety_feat_config(void __iomem *ioaddr, unsigned int asp);
int dwmac5_safety_feat_irq_status(struct net_device *ndev,
void __iomem *ioaddr, unsigned int asp,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index df2c74bbfcff..269da57c99f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4709,6 +4709,9 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
if (priv->dma_cap.tsoen)
dev_info(priv->device, "TSO supported\n");

+ priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
+ priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
+
/* Run HW quirks, if any */
if (priv->hwif_quirks) {
ret = priv->hwif_quirks(priv);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index bd964c31d333..00e83c877496 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -198,5 +198,7 @@ struct plat_stmmacenet_data {
int mac_port_sel_speed;
bool en_tx_lpi_clockgating;
int has_xgmac;
+ bool vlan_fail_q_en;
+ u8 vlan_fail_q;
};
#endif
--
2.17.0

2020-09-25 23:51:16

by David Miller

[permalink] [raw]
Subject: Re: [PATCH net-next 1/1] net: stmmac: Add option for VLAN filter fail queue enable

From: Wong Vee Khee <[email protected]>
Date: Fri, 25 Sep 2020 17:40:41 +0800

> From: "Chuah, Kim Tatt" <[email protected]>
>
> Add option in plat_stmmacenet_data struct to enable VLAN Filter Fail
> Queuing. This option allows packets that fail VLAN filter to be routed
> to a specific Rx queue when Receive All is also set.
>
> When this option is enabled:
> - Enable VFFQ only when entering promiscuous mode, because Receive All
> will pass up all rx packets that failed address filtering (similar to
> promiscuous mode).
> - VLAN-promiscuous mode is never entered to allow rx packet to fail VLAN
> filters and get routed to selected VFFQ Rx queue.
>
> Reviewed-by: Voon Weifeng <[email protected]>
> Reviewed-by: Ong Boon Leong <[email protected]>
> Signed-off-by: Chuah, Kim Tatt <[email protected]>
> Signed-off-by: Ong Boon Leong <[email protected]>

Applied.