Standardize on the dev_ based logging and drop the include of drm_print.h.
Remove useless dsi_color_from_mipi function.
Signed-off-by: Yannick Fertre <[email protected]>
---
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 87 ++++++++++++++-------------
1 file changed, 45 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 164f79ef6269..93fa8bfd3127 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -76,6 +76,7 @@ enum dsi_color {
struct dw_mipi_dsi_stm {
void __iomem *base;
+ struct device *dev;
struct clk *pllref_clk;
struct dw_mipi_dsi *dsi;
u32 hw_version;
@@ -110,23 +111,6 @@ static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
}
-static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
-{
- switch (fmt) {
- case MIPI_DSI_FMT_RGB888:
- return DSI_RGB888;
- case MIPI_DSI_FMT_RGB666:
- return DSI_RGB666_CONF2;
- case MIPI_DSI_FMT_RGB666_PACKED:
- return DSI_RGB666_CONF1;
- case MIPI_DSI_FMT_RGB565:
- return DSI_RGB565_CONF1;
- default:
- DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
- }
- return DSI_RGB888;
-}
-
static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
{
int divisor = idf * odf;
@@ -205,14 +189,14 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
SLEEP_US, TIMEOUT_US);
if (ret)
- DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
+ dev_dbg(dsi->dev, "!TIMEOUT! waiting REGU, let's continue\n");
/* Enable the DSI PLL & wait for its lock */
dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
SLEEP_US, TIMEOUT_US);
if (ret)
- DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
+ dev_dbg(dsi->dev, "!TIMEOUT! waiting PLL, let's continue\n");
return 0;
}
@@ -221,7 +205,7 @@ static void dw_mipi_dsi_phy_power_on(void *priv_data)
{
struct dw_mipi_dsi_stm *dsi = priv_data;
- DRM_DEBUG_DRIVER("\n");
+ dev_dbg(dsi->dev, "\n");
/* Enable the DSI wrapper */
dsi_set(dsi, DSI_WCR, WCR_DSIEN);
@@ -231,7 +215,7 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
{
struct dw_mipi_dsi_stm *dsi = priv_data;
- DRM_DEBUG_DRIVER("\n");
+ dev_dbg(dsi->dev, "\n");
/* Disable the DSI wrapper */
dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
@@ -244,6 +228,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
{
struct dw_mipi_dsi_stm *dsi = priv_data;
unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
+ enum mipi_dsi_pixel_format fmt;
int ret, bpp;
u32 val;
@@ -267,11 +252,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
if (pll_out_khz > dsi->lane_max_kbps) {
pll_out_khz = dsi->lane_max_kbps;
- DRM_WARN("Warning max phy mbps is used\n");
+ dev_warn(dsi->dev, "Warning max phy mbps is used\n");
}
if (pll_out_khz < dsi->lane_min_kbps) {
pll_out_khz = dsi->lane_min_kbps;
- DRM_WARN("Warning min phy mbps is used\n");
+ dev_warn(dsi->dev, "Warning min phy mbps is used\n");
}
/* Compute best pll parameters */
@@ -281,7 +266,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
&idf, &ndiv, &odf);
if (ret)
- DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
+ dev_warn(dsi->dev, "Warning dsi_pll_get_params(): bad params\n");
/* Get the adjusted pll out value */
pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
@@ -297,14 +282,31 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
/* Select video mode by resetting DSIM bit */
dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
+ switch (format) {
+ case MIPI_DSI_FMT_RGB888:
+ fmt = DSI_RGB888;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ fmt = DSI_RGB666_CONF2;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ fmt = DSI_RGB666_CONF1;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ fmt = DSI_RGB565_CONF1;
+ break;
+ default:
+ fmt = DSI_RGB888;
+ dev_err(dsi->dev, "MIPI color invalid, so we use rgb888\n");
+ }
+
/* Select the color coding */
- dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
- dsi_color_from_mipi(format) << 1);
+ dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, fmt << 1);
*lane_mbps = pll_out_khz / 1000;
- DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
- pll_in_khz, pll_out_khz, *lane_mbps);
+ dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
+ *lane_mbps);
return 0;
}
@@ -352,11 +354,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
if (!dsi)
return -ENOMEM;
+ dsi->dev = dev;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dsi->base = devm_ioremap_resource(dev, res);
if (IS_ERR(dsi->base)) {
ret = PTR_ERR(dsi->base);
- DRM_ERROR("Unable to get dsi registers %d\n", ret);
+ dev_err(dev, "Unable to get dsi registers %d\n", ret);
return ret;
}
@@ -364,13 +368,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
if (IS_ERR(dsi->vdd_supply)) {
ret = PTR_ERR(dsi->vdd_supply);
if (ret != -EPROBE_DEFER)
- DRM_ERROR("Failed to request regulator: %d\n", ret);
+ dev_err(dev, "Failed to request regulator: %d\n", ret);
return ret;
}
ret = regulator_enable(dsi->vdd_supply);
if (ret) {
- DRM_ERROR("Failed to enable regulator: %d\n", ret);
+ dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
@@ -378,27 +382,26 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
if (IS_ERR(dsi->pllref_clk)) {
ret = PTR_ERR(dsi->pllref_clk);
if (ret != -EPROBE_DEFER)
- DRM_ERROR("Unable to get pll reference clock: %d\n",
- ret);
+ dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
goto err_clk_get;
}
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
- DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
+ dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
goto err_clk_get;
}
pclk = devm_clk_get(dev, "pclk");
if (IS_ERR(pclk)) {
ret = PTR_ERR(pclk);
- DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
+ dev_err(dev, "Unable to get peripheral clock: %d\n", ret);
goto err_dsi_probe;
}
ret = clk_prepare_enable(pclk);
if (ret) {
- DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
+ dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__);
goto err_dsi_probe;
}
@@ -407,7 +410,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
ret = -ENODEV;
- DRM_ERROR("bad dsi hardware version\n");
+ dev_err(dev, "bad dsi hardware version\n");
goto err_dsi_probe;
}
@@ -420,7 +423,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
if (IS_ERR(dsi->dsi)) {
ret = PTR_ERR(dsi->dsi);
if (ret != -EPROBE_DEFER)
- DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
+ dev_err(dev, "Failed to initialize mipi dsi host: %d\n", ret);
goto err_dsi_probe;
}
@@ -449,7 +452,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
{
struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
- DRM_DEBUG_DRIVER("\n");
+ dev_dbg(dsi->dev, "\n");
clk_disable_unprepare(dsi->pllref_clk);
regulator_disable(dsi->vdd_supply);
@@ -462,18 +465,18 @@ static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
int ret;
- DRM_DEBUG_DRIVER("\n");
+ dev_dbg(dsi->dev, "\n");
ret = regulator_enable(dsi->vdd_supply);
if (ret) {
- DRM_ERROR("Failed to enable regulator: %d\n", ret);
+ dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
regulator_disable(dsi->vdd_supply);
- DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
+ dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
return ret;
}
--
2.17.1
On Fri, 2020-09-25 at 12:22 +0200, Yannick Fertre wrote:
> Standardize on the dev_ based logging and drop the include of drm_print.h.
> Remove useless dsi_color_from_mipi function.
[]
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
[]
> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
> - pll_in_khz, pll_out_khz, *lane_mbps);
> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
> + *lane_mbps);
The line wrapping change here is pretty pointless and IMO
makes the code harder to read.
Hi Yannick.
On Fri, Sep 25, 2020 at 12:22:33PM +0200, Yannick Fertre wrote:
> Standardize on the dev_ based logging and drop the include of drm_print.h.
The patchs filas to drop the include mentioned here.
> Remove useless dsi_color_from_mipi function.
IMO the dsi_color_from_mipi() was nice, and inlining the helper
is no gain for readability.
Sam
>
> Signed-off-by: Yannick Fertre <[email protected]>
> ---
> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 87 ++++++++++++++-------------
> 1 file changed, 45 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> index 164f79ef6269..93fa8bfd3127 100644
> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> @@ -76,6 +76,7 @@ enum dsi_color {
>
> struct dw_mipi_dsi_stm {
> void __iomem *base;
> + struct device *dev;
> struct clk *pllref_clk;
> struct dw_mipi_dsi *dsi;
> u32 hw_version;
> @@ -110,23 +111,6 @@ static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
> dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
> }
>
> -static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
> -{
> - switch (fmt) {
> - case MIPI_DSI_FMT_RGB888:
> - return DSI_RGB888;
> - case MIPI_DSI_FMT_RGB666:
> - return DSI_RGB666_CONF2;
> - case MIPI_DSI_FMT_RGB666_PACKED:
> - return DSI_RGB666_CONF1;
> - case MIPI_DSI_FMT_RGB565:
> - return DSI_RGB565_CONF1;
> - default:
> - DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
> - }
> - return DSI_RGB888;
> -}
> -
> static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
> {
> int divisor = idf * odf;
> @@ -205,14 +189,14 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
> SLEEP_US, TIMEOUT_US);
> if (ret)
> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
> + dev_dbg(dsi->dev, "!TIMEOUT! waiting REGU, let's continue\n");
>
> /* Enable the DSI PLL & wait for its lock */
> dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
> SLEEP_US, TIMEOUT_US);
> if (ret)
> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
> + dev_dbg(dsi->dev, "!TIMEOUT! waiting PLL, let's continue\n");
>
> return 0;
> }
> @@ -221,7 +205,7 @@ static void dw_mipi_dsi_phy_power_on(void *priv_data)
> {
> struct dw_mipi_dsi_stm *dsi = priv_data;
>
> - DRM_DEBUG_DRIVER("\n");
> + dev_dbg(dsi->dev, "\n");
>
> /* Enable the DSI wrapper */
> dsi_set(dsi, DSI_WCR, WCR_DSIEN);
> @@ -231,7 +215,7 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
> {
> struct dw_mipi_dsi_stm *dsi = priv_data;
>
> - DRM_DEBUG_DRIVER("\n");
> + dev_dbg(dsi->dev, "\n");
>
> /* Disable the DSI wrapper */
> dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
> @@ -244,6 +228,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> {
> struct dw_mipi_dsi_stm *dsi = priv_data;
> unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
> + enum mipi_dsi_pixel_format fmt;
> int ret, bpp;
> u32 val;
>
> @@ -267,11 +252,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>
> if (pll_out_khz > dsi->lane_max_kbps) {
> pll_out_khz = dsi->lane_max_kbps;
> - DRM_WARN("Warning max phy mbps is used\n");
> + dev_warn(dsi->dev, "Warning max phy mbps is used\n");
> }
> if (pll_out_khz < dsi->lane_min_kbps) {
> pll_out_khz = dsi->lane_min_kbps;
> - DRM_WARN("Warning min phy mbps is used\n");
> + dev_warn(dsi->dev, "Warning min phy mbps is used\n");
> }
>
> /* Compute best pll parameters */
> @@ -281,7 +266,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
> &idf, &ndiv, &odf);
> if (ret)
> - DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
> + dev_warn(dsi->dev, "Warning dsi_pll_get_params(): bad params\n");
>
> /* Get the adjusted pll out value */
> pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
> @@ -297,14 +282,31 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
> /* Select video mode by resetting DSIM bit */
> dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
>
> + switch (format) {
> + case MIPI_DSI_FMT_RGB888:
> + fmt = DSI_RGB888;
> + break;
> + case MIPI_DSI_FMT_RGB666:
> + fmt = DSI_RGB666_CONF2;
> + break;
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + fmt = DSI_RGB666_CONF1;
> + break;
> + case MIPI_DSI_FMT_RGB565:
> + fmt = DSI_RGB565_CONF1;
> + break;
> + default:
> + fmt = DSI_RGB888;
> + dev_err(dsi->dev, "MIPI color invalid, so we use rgb888\n");
> + }
> +
> /* Select the color coding */
> - dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
> - dsi_color_from_mipi(format) << 1);
> + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, fmt << 1);
>
> *lane_mbps = pll_out_khz / 1000;
>
> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
> - pll_in_khz, pll_out_khz, *lane_mbps);
> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
> + *lane_mbps);
>
> return 0;
> }
> @@ -352,11 +354,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> if (!dsi)
> return -ENOMEM;
>
> + dsi->dev = dev;
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> dsi->base = devm_ioremap_resource(dev, res);
> if (IS_ERR(dsi->base)) {
> ret = PTR_ERR(dsi->base);
> - DRM_ERROR("Unable to get dsi registers %d\n", ret);
> + dev_err(dev, "Unable to get dsi registers %d\n", ret);
> return ret;
> }
>
> @@ -364,13 +368,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> if (IS_ERR(dsi->vdd_supply)) {
> ret = PTR_ERR(dsi->vdd_supply);
> if (ret != -EPROBE_DEFER)
> - DRM_ERROR("Failed to request regulator: %d\n", ret);
> + dev_err(dev, "Failed to request regulator: %d\n", ret);
> return ret;
> }
>
> ret = regulator_enable(dsi->vdd_supply);
> if (ret) {
> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
> return ret;
> }
>
> @@ -378,27 +382,26 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> if (IS_ERR(dsi->pllref_clk)) {
> ret = PTR_ERR(dsi->pllref_clk);
> if (ret != -EPROBE_DEFER)
> - DRM_ERROR("Unable to get pll reference clock: %d\n",
> - ret);
> + dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> goto err_clk_get;
> }
>
> ret = clk_prepare_enable(dsi->pllref_clk);
> if (ret) {
> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
> goto err_clk_get;
> }
>
> pclk = devm_clk_get(dev, "pclk");
> if (IS_ERR(pclk)) {
> ret = PTR_ERR(pclk);
> - DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
> + dev_err(dev, "Unable to get peripheral clock: %d\n", ret);
> goto err_dsi_probe;
> }
>
> ret = clk_prepare_enable(pclk);
> if (ret) {
> - DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
> + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__);
> goto err_dsi_probe;
> }
>
> @@ -407,7 +410,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>
> if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
> ret = -ENODEV;
> - DRM_ERROR("bad dsi hardware version\n");
> + dev_err(dev, "bad dsi hardware version\n");
> goto err_dsi_probe;
> }
>
> @@ -420,7 +423,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
> if (IS_ERR(dsi->dsi)) {
> ret = PTR_ERR(dsi->dsi);
> if (ret != -EPROBE_DEFER)
> - DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
> + dev_err(dev, "Failed to initialize mipi dsi host: %d\n", ret);
> goto err_dsi_probe;
> }
>
> @@ -449,7 +452,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
> {
> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>
> - DRM_DEBUG_DRIVER("\n");
> + dev_dbg(dsi->dev, "\n");
>
> clk_disable_unprepare(dsi->pllref_clk);
> regulator_disable(dsi->vdd_supply);
> @@ -462,18 +465,18 @@ static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
> int ret;
>
> - DRM_DEBUG_DRIVER("\n");
> + dev_dbg(dsi->dev, "\n");
>
> ret = regulator_enable(dsi->vdd_supply);
> if (ret) {
> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
> return ret;
> }
>
> ret = clk_prepare_enable(dsi->pllref_clk);
> if (ret) {
> regulator_disable(dsi->vdd_supply);
> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
> return ret;
> }
>
> --
> 2.17.1
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
On 9/25/20 2:02 PM, Joe Perches wrote:
> On Fri, 2020-09-25 at 12:22 +0200, Yannick Fertre wrote:
>> Standardize on the dev_ based logging and drop the include of drm_print.h.
>> Remove useless dsi_color_from_mipi function.
> []
>> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
> []
>> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
>> - pll_in_khz, pll_out_khz, *lane_mbps);
>> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
>> + *lane_mbps);
>
> The line wrapping change here is pretty pointless and IMO
> makes the code harder to read.
Hi,
ok, I will restore the line wrapping.
Best regards
Yannick
On 9/25/20 4:51 PM, Sam Ravnborg wrote:
> Hi Yannick.
>
> On Fri, Sep 25, 2020 at 12:22:33PM +0200, Yannick Fertre wrote:
>> Standardize on the dev_ based logging and drop the include of drm_print.h.
> The patchs filas to drop the include mentioned here.
>
>> Remove useless dsi_color_from_mipi function.
> IMO the dsi_color_from_mipi() was nice, and inlining the helper
> is no gain for readability.
>
> Sam
>
Hi,
I will restore the dsi_color_from_mipi() fucntion & introduce a new
parameter (dev) which is necessary for call of dev_err.
Yannick
>>
>> Signed-off-by: Yannick Fertre <[email protected]>
>> ---
>> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 87 ++++++++++++++-------------
>> 1 file changed, 45 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> index 164f79ef6269..93fa8bfd3127 100644
>> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> @@ -76,6 +76,7 @@ enum dsi_color {
>>
>> struct dw_mipi_dsi_stm {
>> void __iomem *base;
>> + struct device *dev;
>> struct clk *pllref_clk;
>> struct dw_mipi_dsi *dsi;
>> u32 hw_version;
>> @@ -110,23 +111,6 @@ static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
>> dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
>> }
>>
>> -static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
>> -{
>> - switch (fmt) {
>> - case MIPI_DSI_FMT_RGB888:
>> - return DSI_RGB888;
>> - case MIPI_DSI_FMT_RGB666:
>> - return DSI_RGB666_CONF2;
>> - case MIPI_DSI_FMT_RGB666_PACKED:
>> - return DSI_RGB666_CONF1;
>> - case MIPI_DSI_FMT_RGB565:
>> - return DSI_RGB565_CONF1;
>> - default:
>> - DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
>> - }
>> - return DSI_RGB888;
>> -}
>> -
>> static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
>> {
>> int divisor = idf * odf;
>> @@ -205,14 +189,14 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting REGU, let's continue\n");
>>
>> /* Enable the DSI PLL & wait for its lock */
>> dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting PLL, let's continue\n");
>>
>> return 0;
>> }
>> @@ -221,7 +205,7 @@ static void dw_mipi_dsi_phy_power_on(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Enable the DSI wrapper */
>> dsi_set(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -231,7 +215,7 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Disable the DSI wrapper */
>> dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -244,6 +228,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>> unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
>> + enum mipi_dsi_pixel_format fmt;
>> int ret, bpp;
>> u32 val;
>>
>> @@ -267,11 +252,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>>
>> if (pll_out_khz > dsi->lane_max_kbps) {
>> pll_out_khz = dsi->lane_max_kbps;
>> - DRM_WARN("Warning max phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning max phy mbps is used\n");
>> }
>> if (pll_out_khz < dsi->lane_min_kbps) {
>> pll_out_khz = dsi->lane_min_kbps;
>> - DRM_WARN("Warning min phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning min phy mbps is used\n");
>> }
>>
>> /* Compute best pll parameters */
>> @@ -281,7 +266,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
>> &idf, &ndiv, &odf);
>> if (ret)
>> - DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
>> + dev_warn(dsi->dev, "Warning dsi_pll_get_params(): bad params\n");
>>
>> /* Get the adjusted pll out value */
>> pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
>> @@ -297,14 +282,31 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> /* Select video mode by resetting DSIM bit */
>> dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
>>
>> + switch (format) {
>> + case MIPI_DSI_FMT_RGB888:
>> + fmt = DSI_RGB888;
>> + break;
>> + case MIPI_DSI_FMT_RGB666:
>> + fmt = DSI_RGB666_CONF2;
>> + break;
>> + case MIPI_DSI_FMT_RGB666_PACKED:
>> + fmt = DSI_RGB666_CONF1;
>> + break;
>> + case MIPI_DSI_FMT_RGB565:
>> + fmt = DSI_RGB565_CONF1;
>> + break;
>> + default:
>> + fmt = DSI_RGB888;
>> + dev_err(dsi->dev, "MIPI color invalid, so we use rgb888\n");
>> + }
>> +
>> /* Select the color coding */
>> - dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
>> - dsi_color_from_mipi(format) << 1);
>> + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, fmt << 1);
>>
>> *lane_mbps = pll_out_khz / 1000;
>>
>> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
>> - pll_in_khz, pll_out_khz, *lane_mbps);
>> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
>> + *lane_mbps);
>>
>> return 0;
>> }
>> @@ -352,11 +354,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (!dsi)
>> return -ENOMEM;
>>
>> + dsi->dev = dev;
>> +
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> dsi->base = devm_ioremap_resource(dev, res);
>> if (IS_ERR(dsi->base)) {
>> ret = PTR_ERR(dsi->base);
>> - DRM_ERROR("Unable to get dsi registers %d\n", ret);
>> + dev_err(dev, "Unable to get dsi registers %d\n", ret);
>> return ret;
>> }
>>
>> @@ -364,13 +368,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->vdd_supply)) {
>> ret = PTR_ERR(dsi->vdd_supply);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to request regulator: %d\n", ret);
>> + dev_err(dev, "Failed to request regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> @@ -378,27 +382,26 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->pllref_clk)) {
>> ret = PTR_ERR(dsi->pllref_clk);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Unable to get pll reference clock: %d\n",
>> - ret);
>> + dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> pclk = devm_clk_get(dev, "pclk");
>> if (IS_ERR(pclk)) {
>> ret = PTR_ERR(pclk);
>> - DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
>> + dev_err(dev, "Unable to get peripheral clock: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> ret = clk_prepare_enable(pclk);
>> if (ret) {
>> - DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
>> + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__);
>> goto err_dsi_probe;
>> }
>>
>> @@ -407,7 +410,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>>
>> if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
>> ret = -ENODEV;
>> - DRM_ERROR("bad dsi hardware version\n");
>> + dev_err(dev, "bad dsi hardware version\n");
>> goto err_dsi_probe;
>> }
>>
>> @@ -420,7 +423,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->dsi)) {
>> ret = PTR_ERR(dsi->dsi);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
>> + dev_err(dev, "Failed to initialize mipi dsi host: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> @@ -449,7 +452,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
>> {
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> clk_disable_unprepare(dsi->pllref_clk);
>> regulator_disable(dsi->vdd_supply);
>> @@ -462,18 +465,18 @@ static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>> int ret;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> regulator_disable(dsi->vdd_supply);
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> return ret;
>> }
>>
>> --
>> 2.17.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> [email protected]
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam,
thanks for the review. I'll send a new patch with the revert of function
dsi_color_from_mipi.
Best regards
Yannick
On 9/25/20 4:51 PM, Sam Ravnborg wrote:
> Hi Yannick.
>
> On Fri, Sep 25, 2020 at 12:22:33PM +0200, Yannick Fertre wrote:
>> Standardize on the dev_ based logging and drop the include of drm_print.h.
> The patchs filas to drop the include mentioned here.
>
>> Remove useless dsi_color_from_mipi function.
> IMO the dsi_color_from_mipi() was nice, and inlining the helper
> is no gain for readability.
>
> Sam
>
>>
>> Signed-off-by: Yannick Fertre <[email protected]>
>> ---
>> drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 87 ++++++++++++++-------------
>> 1 file changed, 45 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> index 164f79ef6269..93fa8bfd3127 100644
>> --- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> +++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
>> @@ -76,6 +76,7 @@ enum dsi_color {
>>
>> struct dw_mipi_dsi_stm {
>> void __iomem *base;
>> + struct device *dev;
>> struct clk *pllref_clk;
>> struct dw_mipi_dsi *dsi;
>> u32 hw_version;
>> @@ -110,23 +111,6 @@ static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
>> dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
>> }
>>
>> -static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
>> -{
>> - switch (fmt) {
>> - case MIPI_DSI_FMT_RGB888:
>> - return DSI_RGB888;
>> - case MIPI_DSI_FMT_RGB666:
>> - return DSI_RGB666_CONF2;
>> - case MIPI_DSI_FMT_RGB666_PACKED:
>> - return DSI_RGB666_CONF1;
>> - case MIPI_DSI_FMT_RGB565:
>> - return DSI_RGB565_CONF1;
>> - default:
>> - DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
>> - }
>> - return DSI_RGB888;
>> -}
>> -
>> static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
>> {
>> int divisor = idf * odf;
>> @@ -205,14 +189,14 @@ static int dw_mipi_dsi_phy_init(void *priv_data)
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting REGU, let's continue\n");
>>
>> /* Enable the DSI PLL & wait for its lock */
>> dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
>> ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
>> SLEEP_US, TIMEOUT_US);
>> if (ret)
>> - DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
>> + dev_dbg(dsi->dev, "!TIMEOUT! waiting PLL, let's continue\n");
>>
>> return 0;
>> }
>> @@ -221,7 +205,7 @@ static void dw_mipi_dsi_phy_power_on(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Enable the DSI wrapper */
>> dsi_set(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -231,7 +215,7 @@ static void dw_mipi_dsi_phy_power_off(void *priv_data)
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> /* Disable the DSI wrapper */
>> dsi_clear(dsi, DSI_WCR, WCR_DSIEN);
>> @@ -244,6 +228,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> {
>> struct dw_mipi_dsi_stm *dsi = priv_data;
>> unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
>> + enum mipi_dsi_pixel_format fmt;
>> int ret, bpp;
>> u32 val;
>>
>> @@ -267,11 +252,11 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>>
>> if (pll_out_khz > dsi->lane_max_kbps) {
>> pll_out_khz = dsi->lane_max_kbps;
>> - DRM_WARN("Warning max phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning max phy mbps is used\n");
>> }
>> if (pll_out_khz < dsi->lane_min_kbps) {
>> pll_out_khz = dsi->lane_min_kbps;
>> - DRM_WARN("Warning min phy mbps is used\n");
>> + dev_warn(dsi->dev, "Warning min phy mbps is used\n");
>> }
>>
>> /* Compute best pll parameters */
>> @@ -281,7 +266,7 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> ret = dsi_pll_get_params(dsi, pll_in_khz, pll_out_khz,
>> &idf, &ndiv, &odf);
>> if (ret)
>> - DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
>> + dev_warn(dsi->dev, "Warning dsi_pll_get_params(): bad params\n");
>>
>> /* Get the adjusted pll out value */
>> pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
>> @@ -297,14 +282,31 @@ dw_mipi_dsi_get_lane_mbps(void *priv_data, const struct drm_display_mode *mode,
>> /* Select video mode by resetting DSIM bit */
>> dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
>>
>> + switch (format) {
>> + case MIPI_DSI_FMT_RGB888:
>> + fmt = DSI_RGB888;
>> + break;
>> + case MIPI_DSI_FMT_RGB666:
>> + fmt = DSI_RGB666_CONF2;
>> + break;
>> + case MIPI_DSI_FMT_RGB666_PACKED:
>> + fmt = DSI_RGB666_CONF1;
>> + break;
>> + case MIPI_DSI_FMT_RGB565:
>> + fmt = DSI_RGB565_CONF1;
>> + break;
>> + default:
>> + fmt = DSI_RGB888;
>> + dev_err(dsi->dev, "MIPI color invalid, so we use rgb888\n");
>> + }
>> +
>> /* Select the color coding */
>> - dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
>> - dsi_color_from_mipi(format) << 1);
>> + dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX, fmt << 1);
>>
>> *lane_mbps = pll_out_khz / 1000;
>>
>> - DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
>> - pll_in_khz, pll_out_khz, *lane_mbps);
>> + dev_dbg(dsi->dev, "pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n", pll_in_khz, pll_out_khz,
>> + *lane_mbps);
>>
>> return 0;
>> }
>> @@ -352,11 +354,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (!dsi)
>> return -ENOMEM;
>>
>> + dsi->dev = dev;
>> +
>> res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> dsi->base = devm_ioremap_resource(dev, res);
>> if (IS_ERR(dsi->base)) {
>> ret = PTR_ERR(dsi->base);
>> - DRM_ERROR("Unable to get dsi registers %d\n", ret);
>> + dev_err(dev, "Unable to get dsi registers %d\n", ret);
>> return ret;
>> }
>>
>> @@ -364,13 +368,13 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->vdd_supply)) {
>> ret = PTR_ERR(dsi->vdd_supply);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to request regulator: %d\n", ret);
>> + dev_err(dev, "Failed to request regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> @@ -378,27 +382,26 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->pllref_clk)) {
>> ret = PTR_ERR(dsi->pllref_clk);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Unable to get pll reference clock: %d\n",
>> - ret);
>> + dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> goto err_clk_get;
>> }
>>
>> pclk = devm_clk_get(dev, "pclk");
>> if (IS_ERR(pclk)) {
>> ret = PTR_ERR(pclk);
>> - DRM_ERROR("Unable to get peripheral clock: %d\n", ret);
>> + dev_err(dev, "Unable to get peripheral clock: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> ret = clk_prepare_enable(pclk);
>> if (ret) {
>> - DRM_ERROR("%s: Failed to enable peripheral clk\n", __func__);
>> + dev_err(dev, "%s: Failed to enable peripheral clk\n", __func__);
>> goto err_dsi_probe;
>> }
>>
>> @@ -407,7 +410,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>>
>> if (dsi->hw_version != HWVER_130 && dsi->hw_version != HWVER_131) {
>> ret = -ENODEV;
>> - DRM_ERROR("bad dsi hardware version\n");
>> + dev_err(dev, "bad dsi hardware version\n");
>> goto err_dsi_probe;
>> }
>>
>> @@ -420,7 +423,7 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
>> if (IS_ERR(dsi->dsi)) {
>> ret = PTR_ERR(dsi->dsi);
>> if (ret != -EPROBE_DEFER)
>> - DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
>> + dev_err(dev, "Failed to initialize mipi dsi host: %d\n", ret);
>> goto err_dsi_probe;
>> }
>>
>> @@ -449,7 +452,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
>> {
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> clk_disable_unprepare(dsi->pllref_clk);
>> regulator_disable(dsi->vdd_supply);
>> @@ -462,18 +465,18 @@ static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
>> struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
>> int ret;
>>
>> - DRM_DEBUG_DRIVER("\n");
>> + dev_dbg(dsi->dev, "\n");
>>
>> ret = regulator_enable(dsi->vdd_supply);
>> if (ret) {
>> - DRM_ERROR("Failed to enable regulator: %d\n", ret);
>> + dev_err(dev, "Failed to enable regulator: %d\n", ret);
>> return ret;
>> }
>>
>> ret = clk_prepare_enable(dsi->pllref_clk);
>> if (ret) {
>> regulator_disable(dsi->vdd_supply);
>> - DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
>> + dev_err(dev, "Failed to enable pllref_clk: %d\n", ret);
>> return ret;
>> }
>>
>> --
>> 2.17.1
>>
>> _______________________________________________
>> dri-devel mailing list
>> [email protected]
>> https://lists.freedesktop.org/mailman/listinfo/dri-devel