2020-09-24 23:54:36

by Siddharth Gupta

[permalink] [raw]
Subject: [PATCH v5 2/3] remoteproc: qcom: Add capability to collect minidumps

This patch adds support for collecting minidump in the event of remoteproc
crash. Parse the minidump table based on remoteproc's unique minidump-id,
read all memory regions from the remoteproc's minidump table entry and
expose the memory to userspace. The remoteproc platform driver can choose
to collect a full/mini dump by specifying the coredump op.

Signed-off-by: Rishabh Bhatnagar <[email protected]>
Signed-off-by: Gurbir Arora <[email protected]>
Signed-off-by: Siddharth Gupta <[email protected]>
---
drivers/remoteproc/qcom_minidump.h | 64 +++++++++++++
drivers/remoteproc/qcom_q6v5_pas.c | 106 ++++++++++++++++++++-
drivers/remoteproc/remoteproc_coredump.c | 138 ++++++++++++++++++++++++++++
drivers/remoteproc/remoteproc_elf_helpers.h | 27 ++++++
include/linux/remoteproc.h | 1 +
5 files changed, 334 insertions(+), 2 deletions(-)
create mode 100644 drivers/remoteproc/qcom_minidump.h

diff --git a/drivers/remoteproc/qcom_minidump.h b/drivers/remoteproc/qcom_minidump.h
new file mode 100644
index 0000000..437e030
--- /dev/null
+++ b/drivers/remoteproc/qcom_minidump.h
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCOM_MINIDUMP_H
+#define __QCOM_MINIDUMP_H
+
+#define MAX_NUM_OF_SS 10
+#define MAX_REGION_NAME_LENGTH 16
+#define SBL_MINIDUMP_SMEM_ID 602
+#define MD_REGION_VALID ('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0)
+#define MD_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0)
+#define MD_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0)
+
+/**
+ * md_ss_region - Minidump region
+ * @name : Name of the region to be dumped
+ * @seq_num: : Use to differentiate regions with same name.
+ * @md_valid : This entry to be dumped (if set to 1)
+ * @region_base_address : Physical address of region to be dumped
+ * @region_size : Size of the region
+ */
+struct md_ss_region {
+ char name[MAX_REGION_NAME_LENGTH];
+ u32 seq_num;
+ u32 md_valid;
+ u64 region_base_address;
+ u64 region_size;
+};
+
+/**
+ * md_ss_toc: Subsystem's SMEM Table of content
+ * @md_ss_toc_init : Subsystem toc init status
+ * @md_ss_enable_status : if set to 1, this region would be copied during coredump
+ * @encryption_status: Encryption status for this subsystem
+ * @encryption_required : Decides to encrypt the subsystem regions or not
+ * @ss_region_count : Number of regions added in this subsystem toc
+ * @md_ss_smem_regions_baseptr : regions base pointer of the subsystem
+ */
+struct md_ss_toc {
+ u32 md_ss_toc_init;
+ u32 md_ss_enable_status;
+ u32 encryption_status;
+ u32 encryption_required;
+ u32 ss_region_count;
+ u64 md_ss_smem_regions_baseptr;
+};
+
+/**
+ * md_global_toc: Global Table of Content
+ * @md_toc_init : Global Minidump init status
+ * @md_revision : Minidump revision
+ * @md_enable_status : Minidump enable status
+ * @md_ss_toc : Array of subsystems toc
+ */
+struct md_global_toc {
+ u32 md_toc_init;
+ u32 md_revision;
+ u32 md_enable_status;
+ struct md_ss_toc md_ss_toc[MAX_NUM_OF_SS];
+};
+
+#endif
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 3837f23..752c862 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -28,11 +28,13 @@
#include "qcom_pil_info.h"
#include "qcom_q6v5.h"
#include "remoteproc_internal.h"
+#include "qcom_minidump.h"

struct adsp_data {
int crash_reason_smem;
const char *firmware_name;
int pas_id;
+ unsigned int minidump_id;
bool has_aggre2_clk;
bool auto_boot;

@@ -63,6 +65,7 @@ struct qcom_adsp {
int proxy_pd_count;

int pas_id;
+ unsigned int minidump_id;
int crash_reason_smem;
bool has_aggre2_clk;
const char *info_name;
@@ -81,6 +84,8 @@ struct qcom_adsp {
struct qcom_sysmon *sysmon;
};

+static struct md_global_toc *g_md_toc;
+
static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds,
size_t pd_count)
{
@@ -116,6 +121,88 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
}
}

+static void adsp_add_minidump_segments(struct rproc *rproc, struct md_ss_toc *minidump_ss)
+{
+ struct md_ss_region __iomem *region_info;
+ int seg_cnt = 0, i;
+ void __iomem *ptr;
+ dma_addr_t da;
+ size_t size;
+ char *name;
+
+ seg_cnt = minidump_ss->ss_region_count;
+ ptr = ioremap((unsigned long)minidump_ss->md_ss_smem_regions_baseptr,
+ seg_cnt * sizeof(struct md_ss_region));
+
+ if (!ptr)
+ return;
+
+ region_info = ptr;
+
+ if (!list_empty(&rproc->dump_segments)) {
+ dev_info(&rproc->dev, "dump segment list already populated\n");
+ goto unmap_iomem;
+ }
+
+ for (i = 0; i < seg_cnt; i++) {
+ if (__raw_readl(&region_info->md_valid) == MD_REGION_VALID) {
+ name = kmalloc(MAX_REGION_NAME_LENGTH, GFP_KERNEL);
+ memcpy_fromio(name, region_info->name, sizeof(region_info->name));
+ da = __raw_readq(&region_info->region_base_address);
+ size = __raw_readq(&region_info->region_size);
+ rproc_coredump_add_custom_segment(rproc, da, size, NULL, name);
+ }
+ region_info++;
+ }
+
+unmap_iomem:
+ iounmap(ptr);
+}
+
+static void adsp_dump(struct rproc *rproc)
+{
+ struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+ struct md_ss_toc *minidump_ss;
+ size_t size;
+
+ /* Get Global minidump ToC*/
+ if (!g_md_toc)
+ g_md_toc = qcom_smem_get(QCOM_SMEM_HOST_ANY,
+ SBL_MINIDUMP_SMEM_ID, &size);
+
+ /* check if global table pointer exists and init is set */
+ if (IS_ERR(g_md_toc) || !(g_md_toc->md_toc_init)) {
+ dev_err(&rproc->dev, "SMEM is not initialized.\n");
+ return;
+ }
+
+ /* Get subsystem table of contents using the minidump id */
+ minidump_ss = &g_md_toc->md_ss_toc[adsp->minidump_id];
+
+ /**
+ * Collect minidump if SS ToC is valid and segment table
+ * is initialized in memory and encryption status is set.
+ */
+ if (minidump_ss->md_ss_smem_regions_baseptr == 0 ||
+ minidump_ss->md_ss_toc_init != 1 ||
+ minidump_ss->md_ss_enable_status != MD_SS_ENABLED ||
+ minidump_ss->encryption_status != MD_SS_ENCR_DONE) {
+ dev_err(&rproc->dev, "Minidump not ready!! Aborting\n");
+ return;
+ }
+
+ adsp_add_minidump_segments(rproc, minidump_ss);
+ rproc_minidump(rproc);
+}
+
+static void adsp_priv_cleanup(struct rproc *rproc)
+{
+ struct rproc_dump_segment *segment;
+
+ list_for_each_entry(segment, &rproc->dump_segments, node)
+ kfree(segment->priv);
+}
+
static int adsp_load(struct rproc *rproc, const struct firmware *fw)
{
struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
@@ -258,6 +345,15 @@ static const struct rproc_ops adsp_ops = {
.panic = adsp_panic,
};

+static const struct rproc_ops adsp_minidump_ops = {
+ .start = adsp_start,
+ .stop = adsp_stop,
+ .da_to_va = adsp_da_to_va,
+ .load = adsp_load,
+ .coredump = adsp_dump,
+ .priv_cleanup = adsp_priv_cleanup,
+};
+
static int adsp_init_clock(struct qcom_adsp *adsp)
{
int ret;
@@ -398,8 +494,13 @@ static int adsp_probe(struct platform_device *pdev)
if (ret < 0 && ret != -EINVAL)
return ret;

- rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
- fw_name, sizeof(*adsp));
+ if (desc->minidump_id)
+ rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_minidump_ops, fw_name,
+ sizeof(*adsp));
+ else
+ rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops, fw_name,
+ sizeof(*adsp));
+
if (!rproc) {
dev_err(&pdev->dev, "unable to allocate remoteproc\n");
return -ENOMEM;
@@ -411,6 +512,7 @@ static int adsp_probe(struct platform_device *pdev)
adsp = (struct qcom_adsp *)rproc->priv;
adsp->dev = &pdev->dev;
adsp->rproc = rproc;
+ adsp->minidump_id = desc->minidump_id;
adsp->pas_id = desc->pas_id;
adsp->has_aggre2_clk = desc->has_aggre2_clk;
adsp->info_name = desc->sysmon_name;
diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
index bb15a29..0495389 100644
--- a/drivers/remoteproc/remoteproc_coredump.c
+++ b/drivers/remoteproc/remoteproc_coredump.c
@@ -13,6 +13,8 @@
#include "remoteproc_internal.h"
#include "remoteproc_elf_helpers.h"

+#define MAX_STRTBL_SIZE 512
+
struct rproc_coredump_state {
struct rproc *rproc;
void *header;
@@ -27,6 +29,9 @@ void rproc_coredump_cleanup(struct rproc *rproc)
{
struct rproc_dump_segment *entry, *tmp;

+ if (rproc->ops->priv_cleanup)
+ rproc->ops->priv_cleanup(rproc);
+
list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
list_del(&entry->node);
kfree(entry);
@@ -323,3 +328,136 @@ void rproc_coredump(struct rproc *rproc)
*/
wait_for_completion(&dump_state.dump_done);
}
+
+/**
+ * rproc_minidump() - perform minidump
+ * @rproc: rproc handle
+ *
+ * This function will generate an ELF header for the registered sections of
+ * segments and create a devcoredump device associated with rproc. Based on
+ * the coredump configuration this function will directly copy the segments
+ * from device memory to userspace or copy segments from device memory to
+ * a separate buffer, which can then be read by userspace.
+ * The first approach avoids using extra vmalloc memory. But it will stall
+ * recovery flow until dump is read by userspace.
+ */
+void rproc_minidump(struct rproc *rproc)
+{
+ struct rproc_dump_segment *segment;
+ void *shdr;
+ void *ehdr;
+ size_t data_size;
+ size_t offset;
+ void *data;
+ u8 class = rproc->elf_class;
+ int shnum;
+ struct rproc_coredump_state dump_state;
+ unsigned int dump_conf = rproc->dump_conf;
+ char *str_tbl = "STR_TBL";
+
+ if (list_empty(&rproc->dump_segments) ||
+ dump_conf == RPROC_COREDUMP_DISABLED)
+ return;
+
+ if (class == ELFCLASSNONE) {
+ dev_err(&rproc->dev, "Elf class is not set\n");
+ return;
+ }
+
+ /*
+ * We allocate two extra section headers. The first one is null.
+ * Second section header is for the string table. Also space is
+ * allocated for string table.
+ */
+ data_size = elf_size_of_hdr(class) + 2 * elf_size_of_shdr(class) +
+ MAX_STRTBL_SIZE;
+ shnum = 2;
+
+ list_for_each_entry(segment, &rproc->dump_segments, node) {
+ data_size += elf_size_of_shdr(class);
+ if (dump_conf == RPROC_COREDUMP_DEFAULT)
+ data_size += segment->size;
+ shnum++;
+ }
+
+ data = vmalloc(data_size);
+ if (!data)
+ return;
+
+ ehdr = data;
+ memset(ehdr, 0, elf_size_of_hdr(class));
+ /* e_ident field is common for both elf32 and elf64 */
+ elf_hdr_init_ident(ehdr, class);
+
+ elf_hdr_set_e_type(class, ehdr, ET_CORE);
+ elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
+ elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
+ elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
+ elf_hdr_set_e_shoff(class, ehdr, elf_size_of_hdr(class));
+ elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
+ elf_hdr_set_e_shentsize(class, ehdr, elf_size_of_shdr(class));
+ elf_hdr_set_e_shnum(class, ehdr, shnum);
+ elf_hdr_set_e_shstrndx(class, ehdr, 1);
+
+ /* Set the first section header as null and move to the next one. */
+ shdr = data + elf_hdr_get_e_shoff(class, ehdr);
+ memset(shdr, 0, elf_size_of_shdr(class));
+ shdr += elf_size_of_shdr(class);
+
+ /* Initialize the string table. */
+ offset = elf_hdr_get_e_shoff(class, ehdr) +
+ elf_size_of_shdr(class) * elf_hdr_get_e_shnum(class, ehdr);
+ memset(data + offset, 0, MAX_STRTBL_SIZE);
+
+ /* Fill in the string table section header. */
+ memset(shdr, 0, elf_size_of_shdr(class));
+ elf_shdr_set_sh_type(class, shdr, SHT_STRTAB);
+ elf_shdr_set_sh_offset(class, shdr, offset);
+ elf_shdr_set_sh_size(class, shdr, MAX_STRTBL_SIZE);
+ elf_shdr_set_sh_entsize(class, shdr, 0);
+ elf_shdr_set_sh_flags(class, shdr, 0);
+ elf_shdr_set_sh_name(class, shdr, set_section_name(str_tbl, ehdr, class));
+ offset += elf_shdr_get_sh_size(class, shdr);
+ shdr += elf_size_of_shdr(class);
+
+ list_for_each_entry(segment, &rproc->dump_segments, node) {
+ memset(shdr, 0, elf_size_of_shdr(class));
+ elf_shdr_set_sh_type(class, shdr, SHT_PROGBITS);
+ elf_shdr_set_sh_offset(class, shdr, offset);
+ elf_shdr_set_sh_addr(class, shdr, segment->da);
+ elf_shdr_set_sh_size(class, shdr, segment->size);
+ elf_shdr_set_sh_entsize(class, shdr, 0);
+ elf_shdr_set_sh_flags(class, shdr, SHF_WRITE);
+ elf_shdr_set_sh_name(class, shdr,
+ set_section_name(segment->priv, ehdr, class));
+
+ /* No need to copy segments for inline dumps */
+ if (dump_conf == RPROC_COREDUMP_DEFAULT)
+ rproc_copy_segment(rproc, data + offset, segment, 0,
+ segment->size);
+ offset += elf_shdr_get_sh_size(class, shdr);
+ shdr += elf_size_of_shdr(class);
+ }
+
+ if (dump_conf == RPROC_COREDUMP_DEFAULT) {
+ dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
+ return;
+ }
+
+ /* Initialize the dump state struct to be used by rproc_coredump_read */
+ dump_state.rproc = rproc;
+ dump_state.header = data;
+ init_completion(&dump_state.dump_done);
+
+ dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
+ rproc_coredump_read, rproc_coredump_free);
+
+ /* Wait until the dump is read and free is called. Data is freed
+ * by devcoredump framework automatically after 5 minutes.
+ */
+ wait_for_completion(&dump_state.dump_done);
+
+ list_for_each_entry(segment, &rproc->dump_segments, node)
+ kfree(segment->priv);
+}
+EXPORT_SYMBOL(rproc_minidump);
diff --git a/drivers/remoteproc/remoteproc_elf_helpers.h b/drivers/remoteproc/remoteproc_elf_helpers.h
index 4b6be7b..d83ebca 100644
--- a/drivers/remoteproc/remoteproc_elf_helpers.h
+++ b/drivers/remoteproc/remoteproc_elf_helpers.h
@@ -11,6 +11,7 @@
#include <linux/elf.h>
#include <linux/types.h>

+#define MAX_NAME_LENGTH 16
/**
* fw_elf_get_class - Get elf class
* @fw: the ELF firmware image
@@ -65,6 +66,7 @@ ELF_GEN_FIELD_GET_SET(hdr, e_type, u16)
ELF_GEN_FIELD_GET_SET(hdr, e_version, u32)
ELF_GEN_FIELD_GET_SET(hdr, e_ehsize, u32)
ELF_GEN_FIELD_GET_SET(hdr, e_phentsize, u16)
+ELF_GEN_FIELD_GET_SET(hdr, e_shentsize, u16)

ELF_GEN_FIELD_GET_SET(phdr, p_paddr, u64)
ELF_GEN_FIELD_GET_SET(phdr, p_vaddr, u64)
@@ -74,6 +76,9 @@ ELF_GEN_FIELD_GET_SET(phdr, p_type, u32)
ELF_GEN_FIELD_GET_SET(phdr, p_offset, u64)
ELF_GEN_FIELD_GET_SET(phdr, p_flags, u32)
ELF_GEN_FIELD_GET_SET(phdr, p_align, u64)
+ELF_GEN_FIELD_GET_SET(shdr, sh_type, u32)
+ELF_GEN_FIELD_GET_SET(shdr, sh_flags, u32)
+ELF_GEN_FIELD_GET_SET(shdr, sh_entsize, u16)

ELF_GEN_FIELD_GET_SET(shdr, sh_size, u64)
ELF_GEN_FIELD_GET_SET(shdr, sh_offset, u64)
@@ -93,4 +98,26 @@ ELF_STRUCT_SIZE(shdr)
ELF_STRUCT_SIZE(phdr)
ELF_STRUCT_SIZE(hdr)

+static inline unsigned int set_section_name(const char *name, void *ehdr,
+ u8 class)
+{
+ u16 shstrndx = elf_hdr_get_e_shstrndx(class, ehdr);
+ void *shdr;
+ char *strtab;
+ static int strtable_idx = 1;
+ int idx, ret = 0;
+
+ shdr = ehdr + elf_size_of_hdr(class) + shstrndx * elf_size_of_shdr(class);
+ strtab = ehdr + elf_shdr_get_sh_offset(class, shdr);
+ idx = strtable_idx;
+ if (!strtab || !name)
+ return 0;
+
+ ret = idx;
+ idx += strlcpy((strtab + idx), name, MAX_NAME_LENGTH);
+ strtable_idx = idx + 1;
+
+ return ret;
+}
+
#endif /* REMOTEPROC_ELF_LOADER_H */
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index a489aec..b7a5f93 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -658,6 +658,7 @@ rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
int rproc_boot(struct rproc *rproc);
void rproc_shutdown(struct rproc *rproc);
void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
+void rproc_minidump(struct rproc *rproc);
int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
int rproc_coredump_add_custom_segment(struct rproc *rproc,
dma_addr_t da, size_t size,
--
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


2020-09-26 04:20:00

by Bjorn Andersson

[permalink] [raw]
Subject: Re: [PATCH v5 2/3] remoteproc: qcom: Add capability to collect minidumps

On Thu 24 Sep 16:51 PDT 2020, Siddharth Gupta wrote:

> This patch adds support for collecting minidump in the event of remoteproc
> crash. Parse the minidump table based on remoteproc's unique minidump-id,
> read all memory regions from the remoteproc's minidump table entry and
> expose the memory to userspace. The remoteproc platform driver can choose
> to collect a full/mini dump by specifying the coredump op.
>
> Signed-off-by: Rishabh Bhatnagar <[email protected]>
> Signed-off-by: Gurbir Arora <[email protected]>
> Signed-off-by: Siddharth Gupta <[email protected]>

If the three of you authored this patch you should add Co-developed-by
for Rishabh and Gurbir as well.

> ---
> drivers/remoteproc/qcom_minidump.h | 64 +++++++++++++
> drivers/remoteproc/qcom_q6v5_pas.c | 106 ++++++++++++++++++++-
> drivers/remoteproc/remoteproc_coredump.c | 138 ++++++++++++++++++++++++++++
> drivers/remoteproc/remoteproc_elf_helpers.h | 27 ++++++
> include/linux/remoteproc.h | 1 +
> 5 files changed, 334 insertions(+), 2 deletions(-)
> create mode 100644 drivers/remoteproc/qcom_minidump.h
>
> diff --git a/drivers/remoteproc/qcom_minidump.h b/drivers/remoteproc/qcom_minidump.h
> new file mode 100644
> index 0000000..437e030
> --- /dev/null
> +++ b/drivers/remoteproc/qcom_minidump.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef __QCOM_MINIDUMP_H
> +#define __QCOM_MINIDUMP_H
> +
> +#define MAX_NUM_OF_SS 10
> +#define MAX_REGION_NAME_LENGTH 16
> +#define SBL_MINIDUMP_SMEM_ID 602
> +#define MD_REGION_VALID ('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0)
> +#define MD_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0)
> +#define MD_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0)
> +
> +/**
> + * md_ss_region - Minidump region

Valid kerneldoc should be:

* struct md_ss_region - Minidump region

> + * @name : Name of the region to be dumped
> + * @seq_num: : Use to differentiate regions with same name.
> + * @md_valid : This entry to be dumped (if set to 1)
> + * @region_base_address : Physical address of region to be dumped
> + * @region_size : Size of the region
> + */
> +struct md_ss_region {

But why don't you call this struct minidump_region?

> + char name[MAX_REGION_NAME_LENGTH];
> + u32 seq_num;

Is this __le32 or __be32?

> + u32 md_valid;

"valid" would be sufficient

> + u64 region_base_address;

"address"

> + u64 region_size;

"size"

> +};
> +
> +/**
> + * md_ss_toc: Subsystem's SMEM Table of content
> + * @md_ss_toc_init : Subsystem toc init status
> + * @md_ss_enable_status : if set to 1, this region would be copied during coredump
> + * @encryption_status: Encryption status for this subsystem
> + * @encryption_required : Decides to encrypt the subsystem regions or not
> + * @ss_region_count : Number of regions added in this subsystem toc
> + * @md_ss_smem_regions_baseptr : regions base pointer of the subsystem
> + */
> +struct md_ss_toc {

minidump_subsystem_toc

> + u32 md_ss_toc_init;

"status"

> + u32 md_ss_enable_status;

"enabled"

> + u32 encryption_status;
> + u32 encryption_required;
> + u32 ss_region_count;
> + u64 md_ss_smem_regions_baseptr;
> +};
> +
> +/**
> + * md_global_toc: Global Table of Content
> + * @md_toc_init : Global Minidump init status
> + * @md_revision : Minidump revision
> + * @md_enable_status : Minidump enable status
> + * @md_ss_toc : Array of subsystems toc
> + */
> +struct md_global_toc {

minidump_global_toc

> + u32 md_toc_init;
> + u32 md_revision;
> + u32 md_enable_status;
> + struct md_ss_toc md_ss_toc[MAX_NUM_OF_SS];
> +};
> +
> +#endif
> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
> index 3837f23..752c862 100644
> --- a/drivers/remoteproc/qcom_q6v5_pas.c
> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
> @@ -28,11 +28,13 @@
> #include "qcom_pil_info.h"
> #include "qcom_q6v5.h"
> #include "remoteproc_internal.h"
> +#include "qcom_minidump.h"
>
> struct adsp_data {
> int crash_reason_smem;
> const char *firmware_name;
> int pas_id;
> + unsigned int minidump_id;
> bool has_aggre2_clk;
> bool auto_boot;
>
> @@ -63,6 +65,7 @@ struct qcom_adsp {
> int proxy_pd_count;
>
> int pas_id;
> + unsigned int minidump_id;
> int crash_reason_smem;
> bool has_aggre2_clk;
> const char *info_name;
> @@ -81,6 +84,8 @@ struct qcom_adsp {
> struct qcom_sysmon *sysmon;
> };
>
> +static struct md_global_toc *g_md_toc;

"minidump_toc", but I would prefer that you just resolve it from SMEM
each time, over carrying a global pointer.

> +
> static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds,
> size_t pd_count)
> {
> @@ -116,6 +121,88 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
> }
> }
>
> +static void adsp_add_minidump_segments(struct rproc *rproc, struct md_ss_toc *minidump_ss)
> +{
> + struct md_ss_region __iomem *region_info;

"region" would be more succinct.

> + int seg_cnt = 0, i;

No need to initialize the segment count, the first access is an
assignment. And spelling it "count" would be easier to read.

> + void __iomem *ptr;
> + dma_addr_t da;
> + size_t size;
> + char *name;
> +
> + seg_cnt = minidump_ss->ss_region_count;
> + ptr = ioremap((unsigned long)minidump_ss->md_ss_smem_regions_baseptr,
> + seg_cnt * sizeof(struct md_ss_region));
> +
> + if (!ptr)
> + return;
> +
> + region_info = ptr;
> +
> + if (!list_empty(&rproc->dump_segments)) {

You can check this before the ioremap() and simplify the error handling.

But afaict you should see this every time except the first crash for a
given remoteproc. As adsp_priv_cleanup() is only invoked to empty the
list upon shutdown.

Does this imply that you build the list on the first crash and after
that you will just use the old list? If so you should omit the
dev_info() as this is normal behavior.

> + dev_info(&rproc->dev, "dump segment list already populated\n");
> + goto unmap_iomem;
> + }
> +
> + for (i = 0; i < seg_cnt; i++) {
> + if (__raw_readl(&region_info->md_valid) == MD_REGION_VALID) {

Why not just memcpy_fromio the entire region_info, fix up the endian of
the entries with some leXX_to_cpu() and then add it to the segment list
if it's marked valid?

> + name = kmalloc(MAX_REGION_NAME_LENGTH, GFP_KERNEL);
> + memcpy_fromio(name, region_info->name, sizeof(region_info->name));
> + da = __raw_readq(&region_info->region_base_address);
> + size = __raw_readq(&region_info->region_size);
> + rproc_coredump_add_custom_segment(rproc, da, size, NULL, name);
> + }
> + region_info++;
> + }
> +
> +unmap_iomem:
> + iounmap(ptr);
> +}
> +
> +static void adsp_dump(struct rproc *rproc)
> +{
> + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;

priv is a void *, so no need to explicitly cast it.

> + struct md_ss_toc *minidump_ss;
> + size_t size;

You can pass NULL as last parameter to qcom_smem_get() if you don't care
for the result.

> +
> + /* Get Global minidump ToC*/
> + if (!g_md_toc)
> + g_md_toc = qcom_smem_get(QCOM_SMEM_HOST_ANY,
> + SBL_MINIDUMP_SMEM_ID, &size);
> +
> + /* check if global table pointer exists and init is set */
> + if (IS_ERR(g_md_toc) || !(g_md_toc->md_toc_init)) {

No need for the parenthesis around the second expression.

> + dev_err(&rproc->dev, "SMEM is not initialized.\n");
> + return;
> + }
> +
> + /* Get subsystem table of contents using the minidump id */
> + minidump_ss = &g_md_toc->md_ss_toc[adsp->minidump_id];
> +
> + /**
> + * Collect minidump if SS ToC is valid and segment table
> + * is initialized in memory and encryption status is set.
> + */
> + if (minidump_ss->md_ss_smem_regions_baseptr == 0 ||
> + minidump_ss->md_ss_toc_init != 1 ||
> + minidump_ss->md_ss_enable_status != MD_SS_ENABLED ||
> + minidump_ss->encryption_status != MD_SS_ENCR_DONE) {
> + dev_err(&rproc->dev, "Minidump not ready!! Aborting\n");
> + return;
> + }
> +
> + adsp_add_minidump_segments(rproc, minidump_ss);
> + rproc_minidump(rproc);
> +}
> +
> +static void adsp_priv_cleanup(struct rproc *rproc)
> +{
> + struct rproc_dump_segment *segment;
> +
> + list_for_each_entry(segment, &rproc->dump_segments, node)
> + kfree(segment->priv);

In the case of "inline" coredumps this will be a double free as you end
rproc_minidump() with freeing this...

> +}
> +
> static int adsp_load(struct rproc *rproc, const struct firmware *fw)
> {
> struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
> @@ -258,6 +345,15 @@ static const struct rproc_ops adsp_ops = {
> .panic = adsp_panic,
> };
>
> +static const struct rproc_ops adsp_minidump_ops = {
> + .start = adsp_start,
> + .stop = adsp_stop,
> + .da_to_va = adsp_da_to_va,
> + .load = adsp_load,
> + .coredump = adsp_dump,
> + .priv_cleanup = adsp_priv_cleanup,
> +};
> +
> static int adsp_init_clock(struct qcom_adsp *adsp)
> {
> int ret;
> @@ -398,8 +494,13 @@ static int adsp_probe(struct platform_device *pdev)
> if (ret < 0 && ret != -EINVAL)
> return ret;
>
> - rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
> - fw_name, sizeof(*adsp));
> + if (desc->minidump_id)

So for platforms with minidump_id specified we will never attempt to
grab coredumps?

> + rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_minidump_ops, fw_name,
> + sizeof(*adsp));
> + else
> + rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops, fw_name,
> + sizeof(*adsp));
> +
> if (!rproc) {
> dev_err(&pdev->dev, "unable to allocate remoteproc\n");
> return -ENOMEM;
> @@ -411,6 +512,7 @@ static int adsp_probe(struct platform_device *pdev)
> adsp = (struct qcom_adsp *)rproc->priv;
> adsp->dev = &pdev->dev;
> adsp->rproc = rproc;
> + adsp->minidump_id = desc->minidump_id;
> adsp->pas_id = desc->pas_id;
> adsp->has_aggre2_clk = desc->has_aggre2_clk;
> adsp->info_name = desc->sysmon_name;
> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
> index bb15a29..0495389 100644
> --- a/drivers/remoteproc/remoteproc_coredump.c
> +++ b/drivers/remoteproc/remoteproc_coredump.c
> @@ -13,6 +13,8 @@
> #include "remoteproc_internal.h"
> #include "remoteproc_elf_helpers.h"
>
> +#define MAX_STRTBL_SIZE 512
> +
> struct rproc_coredump_state {
> struct rproc *rproc;
> void *header;
> @@ -27,6 +29,9 @@ void rproc_coredump_cleanup(struct rproc *rproc)
> {
> struct rproc_dump_segment *entry, *tmp;
>
> + if (rproc->ops->priv_cleanup)
> + rproc->ops->priv_cleanup(rproc);
> +

This should be done in a patch separate from the qcom pieces.

> list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
> list_del(&entry->node);
> kfree(entry);
> @@ -323,3 +328,136 @@ void rproc_coredump(struct rproc *rproc)
> */
> wait_for_completion(&dump_state.dump_done);
> }
> +
> +/**
> + * rproc_minidump() - perform minidump
> + * @rproc: rproc handle
> + *
> + * This function will generate an ELF header for the registered sections of
> + * segments and create a devcoredump device associated with rproc. Based on
> + * the coredump configuration this function will directly copy the segments
> + * from device memory to userspace or copy segments from device memory to
> + * a separate buffer, which can then be read by userspace.
> + * The first approach avoids using extra vmalloc memory. But it will stall
> + * recovery flow until dump is read by userspace.
> + */
> +void rproc_minidump(struct rproc *rproc)

This is far too similar to rproc_coredump().

What are the exact differences and why can't we refactor
rproc_coredump() to do what you need?

> +{
> + struct rproc_dump_segment *segment;
> + void *shdr;
> + void *ehdr;
> + size_t data_size;
> + size_t offset;
> + void *data;
> + u8 class = rproc->elf_class;
> + int shnum;
> + struct rproc_coredump_state dump_state;
> + unsigned int dump_conf = rproc->dump_conf;
> + char *str_tbl = "STR_TBL";
> +
> + if (list_empty(&rproc->dump_segments) ||
> + dump_conf == RPROC_COREDUMP_DISABLED)
> + return;
> +
> + if (class == ELFCLASSNONE) {
> + dev_err(&rproc->dev, "Elf class is not set\n");
> + return;
> + }
> +
> + /*
> + * We allocate two extra section headers. The first one is null.
> + * Second section header is for the string table. Also space is
> + * allocated for string table.
> + */
> + data_size = elf_size_of_hdr(class) + 2 * elf_size_of_shdr(class) +
> + MAX_STRTBL_SIZE;
> + shnum = 2;
> +
> + list_for_each_entry(segment, &rproc->dump_segments, node) {
> + data_size += elf_size_of_shdr(class);
> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> + data_size += segment->size;
> + shnum++;
> + }
> +
> + data = vmalloc(data_size);
> + if (!data)
> + return;
> +
> + ehdr = data;
> + memset(ehdr, 0, elf_size_of_hdr(class));
> + /* e_ident field is common for both elf32 and elf64 */
> + elf_hdr_init_ident(ehdr, class);
> +
> + elf_hdr_set_e_type(class, ehdr, ET_CORE);
> + elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
> + elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
> + elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
> + elf_hdr_set_e_shoff(class, ehdr, elf_size_of_hdr(class));
> + elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
> + elf_hdr_set_e_shentsize(class, ehdr, elf_size_of_shdr(class));
> + elf_hdr_set_e_shnum(class, ehdr, shnum);
> + elf_hdr_set_e_shstrndx(class, ehdr, 1);
> +
> + /* Set the first section header as null and move to the next one. */
> + shdr = data + elf_hdr_get_e_shoff(class, ehdr);
> + memset(shdr, 0, elf_size_of_shdr(class));
> + shdr += elf_size_of_shdr(class);
> +
> + /* Initialize the string table. */
> + offset = elf_hdr_get_e_shoff(class, ehdr) +
> + elf_size_of_shdr(class) * elf_hdr_get_e_shnum(class, ehdr);
> + memset(data + offset, 0, MAX_STRTBL_SIZE);
> +
> + /* Fill in the string table section header. */
> + memset(shdr, 0, elf_size_of_shdr(class));
> + elf_shdr_set_sh_type(class, shdr, SHT_STRTAB);
> + elf_shdr_set_sh_offset(class, shdr, offset);
> + elf_shdr_set_sh_size(class, shdr, MAX_STRTBL_SIZE);
> + elf_shdr_set_sh_entsize(class, shdr, 0);
> + elf_shdr_set_sh_flags(class, shdr, 0);
> + elf_shdr_set_sh_name(class, shdr, set_section_name(str_tbl, ehdr, class));
> + offset += elf_shdr_get_sh_size(class, shdr);
> + shdr += elf_size_of_shdr(class);
> +
> + list_for_each_entry(segment, &rproc->dump_segments, node) {
> + memset(shdr, 0, elf_size_of_shdr(class));
> + elf_shdr_set_sh_type(class, shdr, SHT_PROGBITS);
> + elf_shdr_set_sh_offset(class, shdr, offset);
> + elf_shdr_set_sh_addr(class, shdr, segment->da);
> + elf_shdr_set_sh_size(class, shdr, segment->size);
> + elf_shdr_set_sh_entsize(class, shdr, 0);
> + elf_shdr_set_sh_flags(class, shdr, SHF_WRITE);
> + elf_shdr_set_sh_name(class, shdr,
> + set_section_name(segment->priv, ehdr, class));
> +
> + /* No need to copy segments for inline dumps */
> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
> + rproc_copy_segment(rproc, data + offset, segment, 0,
> + segment->size);
> + offset += elf_shdr_get_sh_size(class, shdr);
> + shdr += elf_size_of_shdr(class);
> + }
> +
> + if (dump_conf == RPROC_COREDUMP_DEFAULT) {
> + dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
> + return;
> + }
> +
> + /* Initialize the dump state struct to be used by rproc_coredump_read */
> + dump_state.rproc = rproc;
> + dump_state.header = data;
> + init_completion(&dump_state.dump_done);
> +
> + dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
> + rproc_coredump_read, rproc_coredump_free);
> +
> + /* Wait until the dump is read and free is called. Data is freed
> + * by devcoredump framework automatically after 5 minutes.
> + */
> + wait_for_completion(&dump_state.dump_done);
> +
> + list_for_each_entry(segment, &rproc->dump_segments, node)
> + kfree(segment->priv);

As stated above this will lead to double free, but givent hat you don't
empty dump_segments between invocations of rproc_minidump() you will in
above elf_shdr_set_sh_name() hit a use-after-free as well.

> +}
> +EXPORT_SYMBOL(rproc_minidump);
> diff --git a/drivers/remoteproc/remoteproc_elf_helpers.h b/drivers/remoteproc/remoteproc_elf_helpers.h
> index 4b6be7b..d83ebca 100644
> --- a/drivers/remoteproc/remoteproc_elf_helpers.h
> +++ b/drivers/remoteproc/remoteproc_elf_helpers.h
> @@ -11,6 +11,7 @@
> #include <linux/elf.h>
> #include <linux/types.h>
>
> +#define MAX_NAME_LENGTH 16
> /**
> * fw_elf_get_class - Get elf class
> * @fw: the ELF firmware image
> @@ -65,6 +66,7 @@ ELF_GEN_FIELD_GET_SET(hdr, e_type, u16)
> ELF_GEN_FIELD_GET_SET(hdr, e_version, u32)
> ELF_GEN_FIELD_GET_SET(hdr, e_ehsize, u32)
> ELF_GEN_FIELD_GET_SET(hdr, e_phentsize, u16)
> +ELF_GEN_FIELD_GET_SET(hdr, e_shentsize, u16)
>
> ELF_GEN_FIELD_GET_SET(phdr, p_paddr, u64)
> ELF_GEN_FIELD_GET_SET(phdr, p_vaddr, u64)
> @@ -74,6 +76,9 @@ ELF_GEN_FIELD_GET_SET(phdr, p_type, u32)
> ELF_GEN_FIELD_GET_SET(phdr, p_offset, u64)
> ELF_GEN_FIELD_GET_SET(phdr, p_flags, u32)
> ELF_GEN_FIELD_GET_SET(phdr, p_align, u64)
> +ELF_GEN_FIELD_GET_SET(shdr, sh_type, u32)
> +ELF_GEN_FIELD_GET_SET(shdr, sh_flags, u32)
> +ELF_GEN_FIELD_GET_SET(shdr, sh_entsize, u16)
>
> ELF_GEN_FIELD_GET_SET(shdr, sh_size, u64)
> ELF_GEN_FIELD_GET_SET(shdr, sh_offset, u64)
> @@ -93,4 +98,26 @@ ELF_STRUCT_SIZE(shdr)
> ELF_STRUCT_SIZE(phdr)
> ELF_STRUCT_SIZE(hdr)
>
> +static inline unsigned int set_section_name(const char *name, void *ehdr,
> + u8 class)
> +{
> + u16 shstrndx = elf_hdr_get_e_shstrndx(class, ehdr);
> + void *shdr;
> + char *strtab;
> + static int strtable_idx = 1;
> + int idx, ret = 0;
> +
> + shdr = ehdr + elf_size_of_hdr(class) + shstrndx * elf_size_of_shdr(class);
> + strtab = ehdr + elf_shdr_get_sh_offset(class, shdr);
> + idx = strtable_idx;
> + if (!strtab || !name)
> + return 0;
> +
> + ret = idx;
> + idx += strlcpy((strtab + idx), name, MAX_NAME_LENGTH);
> + strtable_idx = idx + 1;
> +
> + return ret;
> +}
> +

This is generic pieces and should as such be in a patch separate from
the qcom specifics.

Regards,
Bjorn

> #endif /* REMOTEPROC_ELF_LOADER_H */
> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
> index a489aec..b7a5f93 100644
> --- a/include/linux/remoteproc.h
> +++ b/include/linux/remoteproc.h
> @@ -658,6 +658,7 @@ rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
> int rproc_boot(struct rproc *rproc);
> void rproc_shutdown(struct rproc *rproc);
> void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
> +void rproc_minidump(struct rproc *rproc);
> int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
> int rproc_coredump_add_custom_segment(struct rproc *rproc,
> dma_addr_t da, size_t size,
> --
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>

2020-09-28 19:41:26

by Siddharth Gupta

[permalink] [raw]
Subject: Re: [PATCH v5 2/3] remoteproc: qcom: Add capability to collect minidumps


On 9/25/2020 9:10 PM, Bjorn Andersson wrote:
> On Thu 24 Sep 16:51 PDT 2020, Siddharth Gupta wrote:
>
>> This patch adds support for collecting minidump in the event of remoteproc
>> crash. Parse the minidump table based on remoteproc's unique minidump-id,
>> read all memory regions from the remoteproc's minidump table entry and
>> expose the memory to userspace. The remoteproc platform driver can choose
>> to collect a full/mini dump by specifying the coredump op.
>>
>> Signed-off-by: Rishabh Bhatnagar <[email protected]>
>> Signed-off-by: Gurbir Arora <[email protected]>
>> Signed-off-by: Siddharth Gupta <[email protected]>
> If the three of you authored this patch you should add Co-developed-by
> for Rishabh and Gurbir as well.
Sure
>> ---
>> drivers/remoteproc/qcom_minidump.h | 64 +++++++++++++
>> drivers/remoteproc/qcom_q6v5_pas.c | 106 ++++++++++++++++++++-
>> drivers/remoteproc/remoteproc_coredump.c | 138 ++++++++++++++++++++++++++++
>> drivers/remoteproc/remoteproc_elf_helpers.h | 27 ++++++
>> include/linux/remoteproc.h | 1 +
>> 5 files changed, 334 insertions(+), 2 deletions(-)
>> create mode 100644 drivers/remoteproc/qcom_minidump.h
>>
>> diff --git a/drivers/remoteproc/qcom_minidump.h b/drivers/remoteproc/qcom_minidump.h
>> new file mode 100644
>> index 0000000..437e030
>> --- /dev/null
>> +++ b/drivers/remoteproc/qcom_minidump.h
>> @@ -0,0 +1,64 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
>> + */
>> +
>> +#ifndef __QCOM_MINIDUMP_H
>> +#define __QCOM_MINIDUMP_H
>> +
>> +#define MAX_NUM_OF_SS 10
>> +#define MAX_REGION_NAME_LENGTH 16
>> +#define SBL_MINIDUMP_SMEM_ID 602
>> +#define MD_REGION_VALID ('V' << 24 | 'A' << 16 | 'L' << 8 | 'I' << 0)
>> +#define MD_SS_ENCR_DONE ('D' << 24 | 'O' << 16 | 'N' << 8 | 'E' << 0)
>> +#define MD_SS_ENABLED ('E' << 24 | 'N' << 16 | 'B' << 8 | 'L' << 0)
>> +
>> +/**
>> + * md_ss_region - Minidump region
> Valid kerneldoc should be:
>
> * struct md_ss_region - Minidump region
>
>> + * @name : Name of the region to be dumped
>> + * @seq_num: : Use to differentiate regions with same name.
>> + * @md_valid : This entry to be dumped (if set to 1)
>> + * @region_base_address : Physical address of region to be dumped
>> + * @region_size : Size of the region
>> + */
>> +struct md_ss_region {
> But why don't you call this struct minidump_region?
>
>> + char name[MAX_REGION_NAME_LENGTH];
>> + u32 seq_num;
> Is this __le32 or __be32?

It is __le32, in that case should I update the structure to have all
__leX values (__le32 seq_num,
__le64 address, etc.) or do a conversion using leX_to_cpu while reading
the iomem region?

>> + u32 md_valid;
> "valid" would be sufficient
>
>> + u64 region_base_address;
> "address"
>
>> + u64 region_size;
> "size"
>
>> +};
>> +
>> +/**
>> + * md_ss_toc: Subsystem's SMEM Table of content
>> + * @md_ss_toc_init : Subsystem toc init status
>> + * @md_ss_enable_status : if set to 1, this region would be copied during coredump
>> + * @encryption_status: Encryption status for this subsystem
>> + * @encryption_required : Decides to encrypt the subsystem regions or not
>> + * @ss_region_count : Number of regions added in this subsystem toc
>> + * @md_ss_smem_regions_baseptr : regions base pointer of the subsystem
>> + */
>> +struct md_ss_toc {
> minidump_subsystem_toc
>
>> + u32 md_ss_toc_init;
> "status"
>
>> + u32 md_ss_enable_status;
> "enabled"
>
>> + u32 encryption_status;
>> + u32 encryption_required;
>> + u32 ss_region_count;
>> + u64 md_ss_smem_regions_baseptr;
>> +};
>> +
>> +/**
>> + * md_global_toc: Global Table of Content
>> + * @md_toc_init : Global Minidump init status
>> + * @md_revision : Minidump revision
>> + * @md_enable_status : Minidump enable status
>> + * @md_ss_toc : Array of subsystems toc
>> + */
>> +struct md_global_toc {
> minidump_global_toc
Sure, I will update the structs accordingly.
>> + u32 md_toc_init;
>> + u32 md_revision;
>> + u32 md_enable_status;
>> + struct md_ss_toc md_ss_toc[MAX_NUM_OF_SS];
>> +};
>> +
>> +#endif
>> diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
>> index 3837f23..752c862 100644
>> --- a/drivers/remoteproc/qcom_q6v5_pas.c
>> +++ b/drivers/remoteproc/qcom_q6v5_pas.c
>> @@ -28,11 +28,13 @@
>> #include "qcom_pil_info.h"
>> #include "qcom_q6v5.h"
>> #include "remoteproc_internal.h"
>> +#include "qcom_minidump.h"
>>
>> struct adsp_data {
>> int crash_reason_smem;
>> const char *firmware_name;
>> int pas_id;
>> + unsigned int minidump_id;
>> bool has_aggre2_clk;
>> bool auto_boot;
>>
>> @@ -63,6 +65,7 @@ struct qcom_adsp {
>> int proxy_pd_count;
>>
>> int pas_id;
>> + unsigned int minidump_id;
>> int crash_reason_smem;
>> bool has_aggre2_clk;
>> const char *info_name;
>> @@ -81,6 +84,8 @@ struct qcom_adsp {
>> struct qcom_sysmon *sysmon;
>> };
>>
>> +static struct md_global_toc *g_md_toc;
> "minidump_toc", but I would prefer that you just resolve it from SMEM
> each time, over carrying a global pointer.
Sure.
>> +
>> static int adsp_pds_enable(struct qcom_adsp *adsp, struct device **pds,
>> size_t pd_count)
>> {
>> @@ -116,6 +121,88 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
>> }
>> }
>>
>> +static void adsp_add_minidump_segments(struct rproc *rproc, struct md_ss_toc *minidump_ss)
>> +{
>> + struct md_ss_region __iomem *region_info;
> "region" would be more succinct.
>
>> + int seg_cnt = 0, i;
> No need to initialize the segment count, the first access is an
> assignment. And spelling it "count" would be easier to read.
>
>> + void __iomem *ptr;
>> + dma_addr_t da;
>> + size_t size;
>> + char *name;
>> +
>> + seg_cnt = minidump_ss->ss_region_count;
>> + ptr = ioremap((unsigned long)minidump_ss->md_ss_smem_regions_baseptr,
>> + seg_cnt * sizeof(struct md_ss_region));
>> +
>> + if (!ptr)
>> + return;
>> +
>> + region_info = ptr;
>> +
>> + if (!list_empty(&rproc->dump_segments)) {
> You can check this before the ioremap() and simplify the error handling.
Sure
> But afaict you should see this every time except the first crash for a
> given remoteproc. As adsp_priv_cleanup() is only invoked to empty the
> list upon shutdown.
>
> Does this imply that you build the list on the first crash and after
> that you will just use the old list? If so you should omit the
> dev_info() as this is normal behavior.

Will be updating to accommodate for relocatable segments.

>> + dev_info(&rproc->dev, "dump segment list already populated\n");
>> + goto unmap_iomem;
>> + }
>> +
>> + for (i = 0; i < seg_cnt; i++) {
>> + if (__raw_readl(&region_info->md_valid) == MD_REGION_VALID) {
> Why not just memcpy_fromio the entire region_info, fix up the endian of
> the entries with some leXX_to_cpu() and then add it to the segment list
> if it's marked valid?

If you could clarify the point I mentioned above, I'll make changes
accordingly.

>> + name = kmalloc(MAX_REGION_NAME_LENGTH, GFP_KERNEL);
>> + memcpy_fromio(name, region_info->name, sizeof(region_info->name));
>> + da = __raw_readq(&region_info->region_base_address);
>> + size = __raw_readq(&region_info->region_size);
>> + rproc_coredump_add_custom_segment(rproc, da, size, NULL, name);
>> + }
>> + region_info++;
>> + }
>> +
>> +unmap_iomem:
>> + iounmap(ptr);
>> +}
>> +
>> +static void adsp_dump(struct rproc *rproc)
>> +{
>> + struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
> priv is a void *, so no need to explicitly cast it.
>
>> + struct md_ss_toc *minidump_ss;
>> + size_t size;
> You can pass NULL as last parameter to qcom_smem_get() if you don't care
> for the result.
>
>> +
>> + /* Get Global minidump ToC*/
>> + if (!g_md_toc)
>> + g_md_toc = qcom_smem_get(QCOM_SMEM_HOST_ANY,
>> + SBL_MINIDUMP_SMEM_ID, &size);
>> +
>> + /* check if global table pointer exists and init is set */
>> + if (IS_ERR(g_md_toc) || !(g_md_toc->md_toc_init)) {
> No need for the parenthesis around the second expression.
Sure I'll make the above changes
>> + dev_err(&rproc->dev, "SMEM is not initialized.\n");
>> + return;
>> + }
>> +
>> + /* Get subsystem table of contents using the minidump id */
>> + minidump_ss = &g_md_toc->md_ss_toc[adsp->minidump_id];
>> +
>> + /**
>> + * Collect minidump if SS ToC is valid and segment table
>> + * is initialized in memory and encryption status is set.
>> + */
>> + if (minidump_ss->md_ss_smem_regions_baseptr == 0 ||
>> + minidump_ss->md_ss_toc_init != 1 ||
>> + minidump_ss->md_ss_enable_status != MD_SS_ENABLED ||
>> + minidump_ss->encryption_status != MD_SS_ENCR_DONE) {
>> + dev_err(&rproc->dev, "Minidump not ready!! Aborting\n");
>> + return;
>> + }
>> +
>> + adsp_add_minidump_segments(rproc, minidump_ss);
>> + rproc_minidump(rproc);
>> +}
>> +
>> +static void adsp_priv_cleanup(struct rproc *rproc)
>> +{
>> + struct rproc_dump_segment *segment;
>> +
>> + list_for_each_entry(segment, &rproc->dump_segments, node)
>> + kfree(segment->priv);
> In the case of "inline" coredumps this will be a double free as you end
> rproc_minidump() with freeing this...
Mistake that got carried over from the initial patches. Will remove it
from rproc_minidump().
>> +}
>> +
>> static int adsp_load(struct rproc *rproc, const struct firmware *fw)
>> {
>> struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
>> @@ -258,6 +345,15 @@ static const struct rproc_ops adsp_ops = {
>> .panic = adsp_panic,
>> };
>>
>> +static const struct rproc_ops adsp_minidump_ops = {
>> + .start = adsp_start,
>> + .stop = adsp_stop,
>> + .da_to_va = adsp_da_to_va,
>> + .load = adsp_load,
>> + .coredump = adsp_dump,
>> + .priv_cleanup = adsp_priv_cleanup,
>> +};
>> +
>> static int adsp_init_clock(struct qcom_adsp *adsp)
>> {
>> int ret;
>> @@ -398,8 +494,13 @@ static int adsp_probe(struct platform_device *pdev)
>> if (ret < 0 && ret != -EINVAL)
>> return ret;
>>
>> - rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops,
>> - fw_name, sizeof(*adsp));
>> + if (desc->minidump_id)
> So for platforms with minidump_id specified we will never attempt to
> grab coredumps?

That is correct. The minidump (if regions are registered correctly)
should give us all
information we need to debug problems.

>> + rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_minidump_ops, fw_name,
>> + sizeof(*adsp));
>> + else
>> + rproc = rproc_alloc(&pdev->dev, pdev->name, &adsp_ops, fw_name,
>> + sizeof(*adsp));
>> +
>> if (!rproc) {
>> dev_err(&pdev->dev, "unable to allocate remoteproc\n");
>> return -ENOMEM;
>> @@ -411,6 +512,7 @@ static int adsp_probe(struct platform_device *pdev)
>> adsp = (struct qcom_adsp *)rproc->priv;
>> adsp->dev = &pdev->dev;
>> adsp->rproc = rproc;
>> + adsp->minidump_id = desc->minidump_id;
>> adsp->pas_id = desc->pas_id;
>> adsp->has_aggre2_clk = desc->has_aggre2_clk;
>> adsp->info_name = desc->sysmon_name;
>> diff --git a/drivers/remoteproc/remoteproc_coredump.c b/drivers/remoteproc/remoteproc_coredump.c
>> index bb15a29..0495389 100644
>> --- a/drivers/remoteproc/remoteproc_coredump.c
>> +++ b/drivers/remoteproc/remoteproc_coredump.c
>> @@ -13,6 +13,8 @@
>> #include "remoteproc_internal.h"
>> #include "remoteproc_elf_helpers.h"
>>
>> +#define MAX_STRTBL_SIZE 512
>> +
>> struct rproc_coredump_state {
>> struct rproc *rproc;
>> void *header;
>> @@ -27,6 +29,9 @@ void rproc_coredump_cleanup(struct rproc *rproc)
>> {
>> struct rproc_dump_segment *entry, *tmp;
>>
>> + if (rproc->ops->priv_cleanup)
>> + rproc->ops->priv_cleanup(rproc);
>> +
> This should be done in a patch separate from the qcom pieces.
Is it okay to add this to the first patch where we introduced the op?
>> list_for_each_entry_safe(entry, tmp, &rproc->dump_segments, node) {
>> list_del(&entry->node);
>> kfree(entry);
>> @@ -323,3 +328,136 @@ void rproc_coredump(struct rproc *rproc)
>> */
>> wait_for_completion(&dump_state.dump_done);
>> }
>> +
>> +/**
>> + * rproc_minidump() - perform minidump
>> + * @rproc: rproc handle
>> + *
>> + * This function will generate an ELF header for the registered sections of
>> + * segments and create a devcoredump device associated with rproc. Based on
>> + * the coredump configuration this function will directly copy the segments
>> + * from device memory to userspace or copy segments from device memory to
>> + * a separate buffer, which can then be read by userspace.
>> + * The first approach avoids using extra vmalloc memory. But it will stall
>> + * recovery flow until dump is read by userspace.
>> + */
>> +void rproc_minidump(struct rproc *rproc)
> This is far too similar to rproc_coredump().
>
> What are the exact differences and why can't we refactor
> rproc_coredump() to do what you need?
Since we are using the section headers instead of the program headers the
structure of the resulting dump will be very different. We are only
registering
particular sections from a segment.

I feel we will be unnecessarily complicating the code to figure out
whether we
have registered sections of a segment or entire program segments to the
dump_segment list, and use shdr or phdr functions respectively.
>> +{
>> + struct rproc_dump_segment *segment;
>> + void *shdr;
>> + void *ehdr;
>> + size_t data_size;
>> + size_t offset;
>> + void *data;
>> + u8 class = rproc->elf_class;
>> + int shnum;
>> + struct rproc_coredump_state dump_state;
>> + unsigned int dump_conf = rproc->dump_conf;
>> + char *str_tbl = "STR_TBL";
>> +
>> + if (list_empty(&rproc->dump_segments) ||
>> + dump_conf == RPROC_COREDUMP_DISABLED)
>> + return;
>> +
>> + if (class == ELFCLASSNONE) {
>> + dev_err(&rproc->dev, "Elf class is not set\n");
>> + return;
>> + }
>> +
>> + /*
>> + * We allocate two extra section headers. The first one is null.
>> + * Second section header is for the string table. Also space is
>> + * allocated for string table.
>> + */
>> + data_size = elf_size_of_hdr(class) + 2 * elf_size_of_shdr(class) +
>> + MAX_STRTBL_SIZE;
>> + shnum = 2;
>> +
>> + list_for_each_entry(segment, &rproc->dump_segments, node) {
>> + data_size += elf_size_of_shdr(class);
>> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
>> + data_size += segment->size;
>> + shnum++;
>> + }
>> +
>> + data = vmalloc(data_size);
>> + if (!data)
>> + return;
>> +
>> + ehdr = data;
>> + memset(ehdr, 0, elf_size_of_hdr(class));
>> + /* e_ident field is common for both elf32 and elf64 */
>> + elf_hdr_init_ident(ehdr, class);
>> +
>> + elf_hdr_set_e_type(class, ehdr, ET_CORE);
>> + elf_hdr_set_e_machine(class, ehdr, rproc->elf_machine);
>> + elf_hdr_set_e_version(class, ehdr, EV_CURRENT);
>> + elf_hdr_set_e_entry(class, ehdr, rproc->bootaddr);
>> + elf_hdr_set_e_shoff(class, ehdr, elf_size_of_hdr(class));
>> + elf_hdr_set_e_ehsize(class, ehdr, elf_size_of_hdr(class));
>> + elf_hdr_set_e_shentsize(class, ehdr, elf_size_of_shdr(class));
>> + elf_hdr_set_e_shnum(class, ehdr, shnum);
>> + elf_hdr_set_e_shstrndx(class, ehdr, 1);
>> +
>> + /* Set the first section header as null and move to the next one. */
>> + shdr = data + elf_hdr_get_e_shoff(class, ehdr);
>> + memset(shdr, 0, elf_size_of_shdr(class));
>> + shdr += elf_size_of_shdr(class);
>> +
>> + /* Initialize the string table. */
>> + offset = elf_hdr_get_e_shoff(class, ehdr) +
>> + elf_size_of_shdr(class) * elf_hdr_get_e_shnum(class, ehdr);
>> + memset(data + offset, 0, MAX_STRTBL_SIZE);
>> +
>> + /* Fill in the string table section header. */
>> + memset(shdr, 0, elf_size_of_shdr(class));
>> + elf_shdr_set_sh_type(class, shdr, SHT_STRTAB);
>> + elf_shdr_set_sh_offset(class, shdr, offset);
>> + elf_shdr_set_sh_size(class, shdr, MAX_STRTBL_SIZE);
>> + elf_shdr_set_sh_entsize(class, shdr, 0);
>> + elf_shdr_set_sh_flags(class, shdr, 0);
>> + elf_shdr_set_sh_name(class, shdr, set_section_name(str_tbl, ehdr, class));
>> + offset += elf_shdr_get_sh_size(class, shdr);
>> + shdr += elf_size_of_shdr(class);
>> +
>> + list_for_each_entry(segment, &rproc->dump_segments, node) {
>> + memset(shdr, 0, elf_size_of_shdr(class));
>> + elf_shdr_set_sh_type(class, shdr, SHT_PROGBITS);
>> + elf_shdr_set_sh_offset(class, shdr, offset);
>> + elf_shdr_set_sh_addr(class, shdr, segment->da);
>> + elf_shdr_set_sh_size(class, shdr, segment->size);
>> + elf_shdr_set_sh_entsize(class, shdr, 0);
>> + elf_shdr_set_sh_flags(class, shdr, SHF_WRITE);
>> + elf_shdr_set_sh_name(class, shdr,
>> + set_section_name(segment->priv, ehdr, class));
>> +
>> + /* No need to copy segments for inline dumps */
>> + if (dump_conf == RPROC_COREDUMP_DEFAULT)
>> + rproc_copy_segment(rproc, data + offset, segment, 0,
>> + segment->size);
>> + offset += elf_shdr_get_sh_size(class, shdr);
>> + shdr += elf_size_of_shdr(class);
>> + }
>> +
>> + if (dump_conf == RPROC_COREDUMP_DEFAULT) {
>> + dev_coredumpv(&rproc->dev, data, data_size, GFP_KERNEL);
>> + return;
>> + }
>> +
>> + /* Initialize the dump state struct to be used by rproc_coredump_read */
>> + dump_state.rproc = rproc;
>> + dump_state.header = data;
>> + init_completion(&dump_state.dump_done);
>> +
>> + dev_coredumpm(&rproc->dev, NULL, &dump_state, data_size, GFP_KERNEL,
>> + rproc_coredump_read, rproc_coredump_free);
>> +
>> + /* Wait until the dump is read and free is called. Data is freed
>> + * by devcoredump framework automatically after 5 minutes.
>> + */
>> + wait_for_completion(&dump_state.dump_done);
>> +
>> + list_for_each_entry(segment, &rproc->dump_segments, node)
>> + kfree(segment->priv);
> As stated above this will lead to double free, but givent hat you don't
> empty dump_segments between invocations of rproc_minidump() you will in
> above elf_shdr_set_sh_name() hit a use-after-free as well.
Will remove it from here.
>> +}
>> +EXPORT_SYMBOL(rproc_minidump);
>> diff --git a/drivers/remoteproc/remoteproc_elf_helpers.h b/drivers/remoteproc/remoteproc_elf_helpers.h
>> index 4b6be7b..d83ebca 100644
>> --- a/drivers/remoteproc/remoteproc_elf_helpers.h
>> +++ b/drivers/remoteproc/remoteproc_elf_helpers.h
>> @@ -11,6 +11,7 @@
>> #include <linux/elf.h>
>> #include <linux/types.h>
>>
>> +#define MAX_NAME_LENGTH 16
>> /**
>> * fw_elf_get_class - Get elf class
>> * @fw: the ELF firmware image
>> @@ -65,6 +66,7 @@ ELF_GEN_FIELD_GET_SET(hdr, e_type, u16)
>> ELF_GEN_FIELD_GET_SET(hdr, e_version, u32)
>> ELF_GEN_FIELD_GET_SET(hdr, e_ehsize, u32)
>> ELF_GEN_FIELD_GET_SET(hdr, e_phentsize, u16)
>> +ELF_GEN_FIELD_GET_SET(hdr, e_shentsize, u16)
>>
>> ELF_GEN_FIELD_GET_SET(phdr, p_paddr, u64)
>> ELF_GEN_FIELD_GET_SET(phdr, p_vaddr, u64)
>> @@ -74,6 +76,9 @@ ELF_GEN_FIELD_GET_SET(phdr, p_type, u32)
>> ELF_GEN_FIELD_GET_SET(phdr, p_offset, u64)
>> ELF_GEN_FIELD_GET_SET(phdr, p_flags, u32)
>> ELF_GEN_FIELD_GET_SET(phdr, p_align, u64)
>> +ELF_GEN_FIELD_GET_SET(shdr, sh_type, u32)
>> +ELF_GEN_FIELD_GET_SET(shdr, sh_flags, u32)
>> +ELF_GEN_FIELD_GET_SET(shdr, sh_entsize, u16)
>>
>> ELF_GEN_FIELD_GET_SET(shdr, sh_size, u64)
>> ELF_GEN_FIELD_GET_SET(shdr, sh_offset, u64)
>> @@ -93,4 +98,26 @@ ELF_STRUCT_SIZE(shdr)
>> ELF_STRUCT_SIZE(phdr)
>> ELF_STRUCT_SIZE(hdr)
>>
>> +static inline unsigned int set_section_name(const char *name, void *ehdr,
>> + u8 class)
>> +{
>> + u16 shstrndx = elf_hdr_get_e_shstrndx(class, ehdr);
>> + void *shdr;
>> + char *strtab;
>> + static int strtable_idx = 1;
>> + int idx, ret = 0;
>> +
>> + shdr = ehdr + elf_size_of_hdr(class) + shstrndx * elf_size_of_shdr(class);
>> + strtab = ehdr + elf_shdr_get_sh_offset(class, shdr);
>> + idx = strtable_idx;
>> + if (!strtab || !name)
>> + return 0;
>> +
>> + ret = idx;
>> + idx += strlcpy((strtab + idx), name, MAX_NAME_LENGTH);
>> + strtable_idx = idx + 1;
>> +
>> + return ret;
>> +}
>> +
> This is generic pieces and should as such be in a patch separate from
> the qcom specifics.
>
> Regards,
> Bjorn
Sure I will move it to a separate patch that adds rproc_minidump and
this together.

Thanks,
Sid
>> #endif /* REMOTEPROC_ELF_LOADER_H */
>> diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
>> index a489aec..b7a5f93 100644
>> --- a/include/linux/remoteproc.h
>> +++ b/include/linux/remoteproc.h
>> @@ -658,6 +658,7 @@ rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len,
>> int rproc_boot(struct rproc *rproc);
>> void rproc_shutdown(struct rproc *rproc);
>> void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type);
>> +void rproc_minidump(struct rproc *rproc);
>> int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size);
>> int rproc_coredump_add_custom_segment(struct rproc *rproc,
>> dma_addr_t da, size_t size,
>> --
>> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>> a Linux Foundation Collaborative Project
>>

2020-09-29 23:07:39

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH v5 2/3] remoteproc: qcom: Add capability to collect minidumps

Hi Siddharth,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on linus/master]
[also build test ERROR on v5.9-rc7 next-20200929]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url: https://github.com/0day-ci/linux/commits/Siddharth-Gupta/Introduce-mini-dump-support-for-remoteproc/20200925-075245
base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 171d4ff79f965c1f164705ef0aaea102a6ad238b
config: arm-allyesconfig (attached as .config)
compiler: arm-linux-gnueabi-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/cc292eb63f7fe2d3007889428362b160e8854e9e
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Siddharth-Gupta/Introduce-mini-dump-support-for-remoteproc/20200925-075245
git checkout cc292eb63f7fe2d3007889428362b160e8854e9e
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>

All errors (new ones prefixed by >>):

drivers/remoteproc/qcom_q6v5_pas.c: In function 'adsp_add_minidump_segments':
>> drivers/remoteproc/qcom_q6v5_pas.c:151:9: error: implicit declaration of function '__raw_readq'; did you mean '__raw_readl'? [-Werror=implicit-function-declaration]
151 | da = __raw_readq(&region_info->region_base_address);
| ^~~~~~~~~~~
| __raw_readl
cc1: some warnings being treated as errors

vim +151 drivers/remoteproc/qcom_q6v5_pas.c

123
124 static void adsp_add_minidump_segments(struct rproc *rproc, struct md_ss_toc *minidump_ss)
125 {
126 struct md_ss_region __iomem *region_info;
127 int seg_cnt = 0, i;
128 void __iomem *ptr;
129 dma_addr_t da;
130 size_t size;
131 char *name;
132
133 seg_cnt = minidump_ss->ss_region_count;
134 ptr = ioremap((unsigned long)minidump_ss->md_ss_smem_regions_baseptr,
135 seg_cnt * sizeof(struct md_ss_region));
136
137 if (!ptr)
138 return;
139
140 region_info = ptr;
141
142 if (!list_empty(&rproc->dump_segments)) {
143 dev_info(&rproc->dev, "dump segment list already populated\n");
144 goto unmap_iomem;
145 }
146
147 for (i = 0; i < seg_cnt; i++) {
148 if (__raw_readl(&region_info->md_valid) == MD_REGION_VALID) {
149 name = kmalloc(MAX_REGION_NAME_LENGTH, GFP_KERNEL);
150 memcpy_fromio(name, region_info->name, sizeof(region_info->name));
> 151 da = __raw_readq(&region_info->region_base_address);
152 size = __raw_readq(&region_info->region_size);
153 rproc_coredump_add_custom_segment(rproc, da, size, NULL, name);
154 }
155 region_info++;
156 }
157
158 unmap_iomem:
159 iounmap(ptr);
160 }
161

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]


Attachments:
(No filename) (3.34 kB)
.config.gz (74.27 kB)
Download all attachments