This patch simply adds support for PCI devices.
Signed-off-by: Nicolin Chen <[email protected]>
---
drivers/iommu/tegra-smmu.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
index 97a7185b4578..9dbc5d7183cc 100644
--- a/drivers/iommu/tegra-smmu.c
+++ b/drivers/iommu/tegra-smmu.c
@@ -15,6 +15,7 @@
#include <linux/spinlock.h>
#include <linux/dma-iommu.h>
#include <linux/dma-mapping.h>
+#include <linux/pci.h>
#include <soc/tegra/ahb.h>
#include <soc/tegra/mc.h>
@@ -935,6 +936,7 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
const struct tegra_smmu_group_soc *soc;
struct tegra_smmu_group *group;
int swgroup = fwspec->ids[0];
+ bool pci = dev_is_pci(dev);
struct iommu_group *grp;
/* Find group_soc associating with swgroup */
@@ -961,7 +963,7 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
group->smmu = smmu;
group->soc = soc;
- group->group = iommu_group_alloc();
+ group->group = pci ? pci_device_group(dev) : iommu_group_alloc();
if (IS_ERR(group->group)) {
devm_kfree(smmu->dev, group);
mutex_unlock(&smmu->lock);
@@ -1180,6 +1182,19 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
return ERR_PTR(err);
}
+#ifdef CONFIG_PCI
+ if (!iommu_present(&pci_bus_type)) {
+ pci_request_acs();
+ err = bus_set_iommu(&pci_bus_type, &tegra_smmu_ops);
+ if (err < 0) {
+ bus_set_iommu(&platform_bus_type, NULL);
+ iommu_device_unregister(&smmu->iommu);
+ iommu_device_sysfs_remove(&smmu->iommu);
+ return ERR_PTR(err);
+ }
+ }
+#endif
+
if (IS_ENABLED(CONFIG_DEBUG_FS))
tegra_smmu_debugfs_init(smmu);
--
2.17.1
26.09.2020 11:07, Nicolin Chen пишет:
...
> +#ifdef CONFIG_PCI
> + if (!iommu_present(&pci_bus_type)) {
Is this iommu_present() check really needed?
> + pci_request_acs();
Shouldn't pci_request_acs() be invoked *after* bus_set_iommu() succeeds?
> + err = bus_set_iommu(&pci_bus_type, &tegra_smmu_ops);
> + if (err < 0) {
> + bus_set_iommu(&platform_bus_type, NULL);
> + iommu_device_unregister(&smmu->iommu);
> + iommu_device_sysfs_remove(&smmu->iommu);
> + return ERR_PTR(err);
> + }
> + }
> +#endif
> +
> if (IS_ENABLED(CONFIG_DEBUG_FS))
> tegra_smmu_debugfs_init(smmu);
>
>
On Sat, Sep 26, 2020 at 01:07:18AM -0700, Nicolin Chen wrote:
> This patch simply adds support for PCI devices.
>
> Signed-off-by: Nicolin Chen <[email protected]>
> ---
> drivers/iommu/tegra-smmu.c | 17 ++++++++++++++++-
> 1 file changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/iommu/tegra-smmu.c b/drivers/iommu/tegra-smmu.c
> index 97a7185b4578..9dbc5d7183cc 100644
> --- a/drivers/iommu/tegra-smmu.c
> +++ b/drivers/iommu/tegra-smmu.c
> @@ -15,6 +15,7 @@
> #include <linux/spinlock.h>
> #include <linux/dma-iommu.h>
> #include <linux/dma-mapping.h>
> +#include <linux/pci.h>
>
> #include <soc/tegra/ahb.h>
> #include <soc/tegra/mc.h>
> @@ -935,6 +936,7 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
> const struct tegra_smmu_group_soc *soc;
> struct tegra_smmu_group *group;
> int swgroup = fwspec->ids[0];
> + bool pci = dev_is_pci(dev);
> struct iommu_group *grp;
>
> /* Find group_soc associating with swgroup */
> @@ -961,7 +963,7 @@ static struct iommu_group *tegra_smmu_device_group(struct device *dev)
> group->smmu = smmu;
> group->soc = soc;
>
> - group->group = iommu_group_alloc();
> + group->group = pci ? pci_device_group(dev) : iommu_group_alloc();
> if (IS_ERR(group->group)) {
> devm_kfree(smmu->dev, group);
> mutex_unlock(&smmu->lock);
> @@ -1180,6 +1182,19 @@ struct tegra_smmu *tegra_smmu_probe(struct device *dev,
> return ERR_PTR(err);
> }
>
> +#ifdef CONFIG_PCI
> + if (!iommu_present(&pci_bus_type)) {
> + pci_request_acs();
> + err = bus_set_iommu(&pci_bus_type, &tegra_smmu_ops);
> + if (err < 0) {
> + bus_set_iommu(&platform_bus_type, NULL);
> + iommu_device_unregister(&smmu->iommu);
> + iommu_device_sysfs_remove(&smmu->iommu);
> + return ERR_PTR(err);
It might be worth factoring out the cleanup code now that there are
multiple failures from which we may need to clean up.
Also, it'd be great if somehow we could do this without the #ifdef,
but I guess since we're using the pci_bus_type global variable directly,
there isn't much we can do here?
Thierry
On Sun, Sep 27, 2020 at 01:18:15AM +0300, Dmitry Osipenko wrote:
> 26.09.2020 11:07, Nicolin Chen пишет:
> ...
> > +#ifdef CONFIG_PCI
> > + if (!iommu_present(&pci_bus_type)) {
>
> Is this iommu_present() check really needed?
>
> > + pci_request_acs();
>
> Shouldn't pci_request_acs() be invoked *after* bus_set_iommu() succeeds?
Will move it after that. Thanks!
On Mon, Sep 28, 2020 at 09:55:45AM +0200, Thierry Reding wrote:
> On Sat, Sep 26, 2020 at 01:07:18AM -0700, Nicolin Chen wrote:
> > +#ifdef CONFIG_PCI
> > + if (!iommu_present(&pci_bus_type)) {
> > + pci_request_acs();
> > + err = bus_set_iommu(&pci_bus_type, &tegra_smmu_ops);
> > + if (err < 0) {
> > + bus_set_iommu(&platform_bus_type, NULL);
> > + iommu_device_unregister(&smmu->iommu);
> > + iommu_device_sysfs_remove(&smmu->iommu);
> > + return ERR_PTR(err);
>
> It might be worth factoring out the cleanup code now that there are
> multiple failures from which we may need to clean up.
Will do.
> Also, it'd be great if somehow we could do this without the #ifdef,
> but I guess since we're using the pci_bus_type global variable directly,
> there isn't much we can do here?
Probably no -- both pci_bus_type and pci_request_acs seem to depend
on it.