In the error case, where a power domain cannot be powered on
successfully at boot time (in mtk_register_power_domains),
pm_genpd_init would still be called with is_off=false, and the
system would later try to disable the power domain again, triggering
warnings as disabled clocks are disabled again (and other potential
issues).
Also print a warning splat in that case, as this should never
happen.
Fixes: c84e358718a66f7 ("soc: Mediatek: Add SCPSYS power domain driver")
Signed-off-by: Nicolas Boichat <[email protected]>
---
Changes in v2:
- Add WARN_ON if the domain can't be powered on, to make it more
obvious that this should not happen (there is already an error
message).
drivers/soc/mediatek/mtk-scpsys.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index f669d3754627..ca75b14931ec 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -524,6 +524,7 @@ static void mtk_register_power_domains(struct platform_device *pdev,
for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
struct generic_pm_domain *genpd = &scpd->genpd;
+ bool on;
/*
* Initially turn on all domains to make the domains usable
@@ -531,9 +532,9 @@ static void mtk_register_power_domains(struct platform_device *pdev,
* software. The unused domains will be switched off during
* late_init time.
*/
- genpd->power_on(genpd);
+ on = !WARN_ON(genpd->power_on(genpd) < 0);
- pm_genpd_init(genpd, NULL, false);
+ pm_genpd_init(genpd, NULL, !on);
}
/*
--
2.28.0.681.g6f77f65b4e-goog
On 28/09/2020 05:31, Nicolas Boichat wrote:
> In the error case, where a power domain cannot be powered on
> successfully at boot time (in mtk_register_power_domains),
> pm_genpd_init would still be called with is_off=false, and the
> system would later try to disable the power domain again, triggering
> warnings as disabled clocks are disabled again (and other potential
> issues).
>
> Also print a warning splat in that case, as this should never
> happen.
>
> Fixes: c84e358718a66f7 ("soc: Mediatek: Add SCPSYS power domain driver")
> Signed-off-by: Nicolas Boichat <[email protected]>
Applied to v5.10-tmp/soc which will be v5.10-next/soc as soon as v5.10-rc1 gets
published.
Nicolas can you please make sure that similar logic will be part of the series
Enric is working on?
Thanks a lot.
Matthias
> ---
>
> Changes in v2:
> - Add WARN_ON if the domain can't be powered on, to make it more
> obvious that this should not happen (there is already an error
> message).
>
> drivers/soc/mediatek/mtk-scpsys.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index f669d3754627..ca75b14931ec 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -524,6 +524,7 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> for (i = 0; i < num; i++) {
> struct scp_domain *scpd = &scp->domains[i];
> struct generic_pm_domain *genpd = &scpd->genpd;
> + bool on;
>
> /*
> * Initially turn on all domains to make the domains usable
> @@ -531,9 +532,9 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> * software. The unused domains will be switched off during
> * late_init time.
> */
> - genpd->power_on(genpd);
> + on = !WARN_ON(genpd->power_on(genpd) < 0);
>
> - pm_genpd_init(genpd, NULL, false);
> + pm_genpd_init(genpd, NULL, !on);
> }
>
> /*
>
On Thu, Oct 1, 2020 at 11:03 PM Matthias Brugger <[email protected]> wrote:
>
>
>
> On 28/09/2020 05:31, Nicolas Boichat wrote:
> > In the error case, where a power domain cannot be powered on
> > successfully at boot time (in mtk_register_power_domains),
> > pm_genpd_init would still be called with is_off=false, and the
> > system would later try to disable the power domain again, triggering
> > warnings as disabled clocks are disabled again (and other potential
> > issues).
> >
> > Also print a warning splat in that case, as this should never
> > happen.
> >
> > Fixes: c84e358718a66f7 ("soc: Mediatek: Add SCPSYS power domain driver")
> > Signed-off-by: Nicolas Boichat <[email protected]>
>
> Applied to v5.10-tmp/soc which will be v5.10-next/soc as soon as v5.10-rc1 gets
> published.
>
> Nicolas can you please make sure that similar logic will be part of the series
> Enric is working on?
https://patchwork.kernel.org/patch/11811767/ the logic is a bit
different, and the whole scpsys driver would fail to probe, but I
think that's also reasonable behaviour.
Thanks,
>
> Thanks a lot.
> Matthias
>
> > ---
> >
> > Changes in v2:
> > - Add WARN_ON if the domain can't be powered on, to make it more
> > obvious that this should not happen (there is already an error
> > message).
> >
> > drivers/soc/mediatek/mtk-scpsys.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index f669d3754627..ca75b14931ec 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -524,6 +524,7 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > for (i = 0; i < num; i++) {
> > struct scp_domain *scpd = &scp->domains[i];
> > struct generic_pm_domain *genpd = &scpd->genpd;
> > + bool on;
> >
> > /*
> > * Initially turn on all domains to make the domains usable
> > @@ -531,9 +532,9 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > * software. The unused domains will be switched off during
> > * late_init time.
> > */
> > - genpd->power_on(genpd);
> > + on = !WARN_ON(genpd->power_on(genpd) < 0);
> >
> > - pm_genpd_init(genpd, NULL, false);
> > + pm_genpd_init(genpd, NULL, !on);
> > }
> >
> > /*
> >