This is the start of the stable review cycle for the 4.19.150 release.
There are 38 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 07 Oct 2020 14:20:55 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.150-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.150-rc1
Will McVicker <[email protected]>
netfilter: ctnetlink: add a range check for l3/l4 protonum
Al Viro <[email protected]>
ep_create_wakeup_source(): dentry name can change under you...
Al Viro <[email protected]>
epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
Al Viro <[email protected]>
epoll: replace ->visited/visited_list with generation count
Al Viro <[email protected]>
epoll: do not insert into poll queues until all sanity checks are done
Or Cohen <[email protected]>
net/packet: fix overflow in tpacket_rcv
Laurent Dufour <[email protected]>
mm: don't rely on system state to detect hot-plug operations
Laurent Dufour <[email protected]>
mm: replace memmap_context by meminit_context
Thibaut Sautereau <[email protected]>
random32: Restore __latent_entropy attribute on net_rand_state
Vincent Huang <[email protected]>
Input: trackpoint - enable Synaptics trackpoints
Nicolas VINCENT <[email protected]>
i2c: cpm: Fix i2c_ram structure
Yu Kuai <[email protected]>
iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
Marek Szyprowski <[email protected]>
clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
Jeffrey Mitchell <[email protected]>
nfs: Fix security label length not being reset
Chris Packham <[email protected]>
pinctrl: mvebu: Fix i2c sda definition for 98DX3236
Taiping Lai <[email protected]>
gpio: sprd: Clear interrupt when setting the type as edge
James Smart <[email protected]>
nvme-fc: fail new connections to a deleted host or remote port
Chris Packham <[email protected]>
spi: fsl-espi: Only process interrupts for expected events
Felix Fietkau <[email protected]>
mac80211: do not allow bigger VHT MPDUs than the hardware supports
Xie He <[email protected]>
drivers/net/wan/hdlc: Set skb->protocol before transmitting
Xie He <[email protected]>
drivers/net/wan/lapbether: Make skb->protocol consistent with the header
Chaitanya Kulkarni <[email protected]>
nvme-core: get/put ctrl and transport module in nvme_dev_open/release()
Olympia Giannou <[email protected]>
rndis_host: increase sleep time in the query-response loop
Lucy Yan <[email protected]>
net: dec: de2104x: Increase receive ring size for Tulip
Martin Cerveny <[email protected]>
drm/sun4i: mixer: Extend regmap max_register
Xie He <[email protected]>
drivers/net/wan/hdlc_fr: Add needed_headroom for PVC devices
Jean Delvare <[email protected]>
drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
Steven Rostedt (VMware) <[email protected]>
ftrace: Move RCU is watching check after recursion check
Jiri Kosina <[email protected]>
Input: i8042 - add nopnp quirk for Acer Aspire 5 A515
Sebastien Boeuf <[email protected]>
net: virtio_vsock: Enhance connection semantics
Stefano Garzarella <[email protected]>
vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()
Stefano Garzarella <[email protected]>
vsock/virtio: stop workers during the .remove()
Stefano Garzarella <[email protected]>
vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock
Dinh Nguyen <[email protected]>
clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
dillon min <[email protected]>
gpio: tc35894: fix up tc35894 interrupt configuration
Bartosz Golaszewski <[email protected]>
gpio: mockup: fix resource leak in error path
Bryan O'Donoghue <[email protected]>
USB: gadget: f_ncm: Fix NDP16 datagram validation
Hans de Goede <[email protected]>
mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models
-------------
Diffstat:
Makefile | 4 +-
arch/ia64/mm/init.c | 6 +-
drivers/base/node.c | 84 +++++----
drivers/clk/samsung/clk-exynos4.c | 4 +-
drivers/clk/socfpga/clk-s10.c | 2 +-
drivers/gpio/gpio-mockup.c | 2 +
drivers/gpio/gpio-sprd.c | 3 +
drivers/gpio/gpio-tc3589x.c | 2 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
drivers/gpu/drm/sun4i/sun8i_mixer.c | 2 +-
drivers/i2c/busses/i2c-cpm.c | 3 +
drivers/input/mouse/trackpoint.c | 2 +
drivers/input/serio/i8042-x86ia64io.h | 7 +
drivers/iommu/exynos-iommu.c | 8 +-
drivers/mmc/host/sdhci-pci-core.c | 3 +-
drivers/net/ethernet/dec/tulip/de2104x.c | 2 +-
drivers/net/usb/rndis_host.c | 2 +-
drivers/net/wan/hdlc_cisco.c | 1 +
drivers/net/wan/hdlc_fr.c | 6 +-
drivers/net/wan/hdlc_ppp.c | 1 +
drivers/net/wan/lapbether.c | 4 +-
drivers/nvme/host/core.c | 15 ++
drivers/nvme/host/fc.c | 6 +-
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 2 +-
drivers/spi/spi-fsl-espi.c | 5 +-
drivers/usb/gadget/function/f_ncm.c | 30 +---
drivers/vhost/vsock.c | 94 +++++-----
fs/eventpoll.c | 71 ++++----
fs/nfs/dir.c | 3 +
include/linux/mm.h | 2 +-
include/linux/mmzone.h | 11 +-
include/linux/node.h | 11 +-
include/linux/virtio_vsock.h | 3 +-
kernel/trace/ftrace.c | 6 +-
lib/random32.c | 2 +-
mm/memory_hotplug.c | 5 +-
mm/page_alloc.c | 11 +-
net/mac80211/vht.c | 8 +-
net/netfilter/nf_conntrack_netlink.c | 2 +
net/packet/af_packet.c | 9 +-
net/vmw_vsock/virtio_transport.c | 265 ++++++++++++++++++----------
net/vmw_vsock/virtio_transport_common.c | 13 +-
42 files changed, 425 insertions(+), 299 deletions(-)
From: Stefano Garzarella <[email protected]>
[ Upstream commit 4c7246dc45e2706770d5233f7ce1597a07e069ba ]
We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().
In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().
In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().
We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().
Reviewed-by: Stefan Hajnoczi <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/vhost/vsock.c | 94 +++++++-------
include/linux/virtio_vsock.h | 3 +-
net/vmw_vsock/virtio_transport.c | 160 ++++++++++++------------
net/vmw_vsock/virtio_transport_common.c | 12 +-
4 files changed, 135 insertions(+), 134 deletions(-)
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 7891bd40ebd82..6ee320259e4f7 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -383,6 +383,52 @@ static bool vhost_vsock_more_replies(struct vhost_vsock *vsock)
return val < vq->num;
}
+static struct virtio_transport vhost_transport = {
+ .transport = {
+ .get_local_cid = vhost_transport_get_local_cid,
+
+ .init = virtio_transport_do_socket_init,
+ .destruct = virtio_transport_destruct,
+ .release = virtio_transport_release,
+ .connect = virtio_transport_connect,
+ .shutdown = virtio_transport_shutdown,
+ .cancel_pkt = vhost_transport_cancel_pkt,
+
+ .dgram_enqueue = virtio_transport_dgram_enqueue,
+ .dgram_dequeue = virtio_transport_dgram_dequeue,
+ .dgram_bind = virtio_transport_dgram_bind,
+ .dgram_allow = virtio_transport_dgram_allow,
+
+ .stream_enqueue = virtio_transport_stream_enqueue,
+ .stream_dequeue = virtio_transport_stream_dequeue,
+ .stream_has_data = virtio_transport_stream_has_data,
+ .stream_has_space = virtio_transport_stream_has_space,
+ .stream_rcvhiwat = virtio_transport_stream_rcvhiwat,
+ .stream_is_active = virtio_transport_stream_is_active,
+ .stream_allow = virtio_transport_stream_allow,
+
+ .notify_poll_in = virtio_transport_notify_poll_in,
+ .notify_poll_out = virtio_transport_notify_poll_out,
+ .notify_recv_init = virtio_transport_notify_recv_init,
+ .notify_recv_pre_block = virtio_transport_notify_recv_pre_block,
+ .notify_recv_pre_dequeue = virtio_transport_notify_recv_pre_dequeue,
+ .notify_recv_post_dequeue = virtio_transport_notify_recv_post_dequeue,
+ .notify_send_init = virtio_transport_notify_send_init,
+ .notify_send_pre_block = virtio_transport_notify_send_pre_block,
+ .notify_send_pre_enqueue = virtio_transport_notify_send_pre_enqueue,
+ .notify_send_post_enqueue = virtio_transport_notify_send_post_enqueue,
+
+ .set_buffer_size = virtio_transport_set_buffer_size,
+ .set_min_buffer_size = virtio_transport_set_min_buffer_size,
+ .set_max_buffer_size = virtio_transport_set_max_buffer_size,
+ .get_buffer_size = virtio_transport_get_buffer_size,
+ .get_min_buffer_size = virtio_transport_get_min_buffer_size,
+ .get_max_buffer_size = virtio_transport_get_max_buffer_size,
+ },
+
+ .send_pkt = vhost_transport_send_pkt,
+};
+
static void vhost_vsock_handle_tx_kick(struct vhost_work *work)
{
struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
@@ -439,7 +485,7 @@ static void vhost_vsock_handle_tx_kick(struct vhost_work *work)
if (le64_to_cpu(pkt->hdr.src_cid) == vsock->guest_cid &&
le64_to_cpu(pkt->hdr.dst_cid) ==
vhost_transport_get_local_cid())
- virtio_transport_recv_pkt(pkt);
+ virtio_transport_recv_pkt(&vhost_transport, pkt);
else
virtio_transport_free_pkt(pkt);
@@ -792,52 +838,6 @@ static struct miscdevice vhost_vsock_misc = {
.fops = &vhost_vsock_fops,
};
-static struct virtio_transport vhost_transport = {
- .transport = {
- .get_local_cid = vhost_transport_get_local_cid,
-
- .init = virtio_transport_do_socket_init,
- .destruct = virtio_transport_destruct,
- .release = virtio_transport_release,
- .connect = virtio_transport_connect,
- .shutdown = virtio_transport_shutdown,
- .cancel_pkt = vhost_transport_cancel_pkt,
-
- .dgram_enqueue = virtio_transport_dgram_enqueue,
- .dgram_dequeue = virtio_transport_dgram_dequeue,
- .dgram_bind = virtio_transport_dgram_bind,
- .dgram_allow = virtio_transport_dgram_allow,
-
- .stream_enqueue = virtio_transport_stream_enqueue,
- .stream_dequeue = virtio_transport_stream_dequeue,
- .stream_has_data = virtio_transport_stream_has_data,
- .stream_has_space = virtio_transport_stream_has_space,
- .stream_rcvhiwat = virtio_transport_stream_rcvhiwat,
- .stream_is_active = virtio_transport_stream_is_active,
- .stream_allow = virtio_transport_stream_allow,
-
- .notify_poll_in = virtio_transport_notify_poll_in,
- .notify_poll_out = virtio_transport_notify_poll_out,
- .notify_recv_init = virtio_transport_notify_recv_init,
- .notify_recv_pre_block = virtio_transport_notify_recv_pre_block,
- .notify_recv_pre_dequeue = virtio_transport_notify_recv_pre_dequeue,
- .notify_recv_post_dequeue = virtio_transport_notify_recv_post_dequeue,
- .notify_send_init = virtio_transport_notify_send_init,
- .notify_send_pre_block = virtio_transport_notify_send_pre_block,
- .notify_send_pre_enqueue = virtio_transport_notify_send_pre_enqueue,
- .notify_send_post_enqueue = virtio_transport_notify_send_post_enqueue,
-
- .set_buffer_size = virtio_transport_set_buffer_size,
- .set_min_buffer_size = virtio_transport_set_min_buffer_size,
- .set_max_buffer_size = virtio_transport_set_max_buffer_size,
- .get_buffer_size = virtio_transport_get_buffer_size,
- .get_min_buffer_size = virtio_transport_get_min_buffer_size,
- .get_max_buffer_size = virtio_transport_get_max_buffer_size,
- },
-
- .send_pkt = vhost_transport_send_pkt,
-};
-
static int __init vhost_vsock_init(void)
{
int ret;
diff --git a/include/linux/virtio_vsock.h b/include/linux/virtio_vsock.h
index e223e2632eddd..8b8d13f01caee 100644
--- a/include/linux/virtio_vsock.h
+++ b/include/linux/virtio_vsock.h
@@ -149,7 +149,8 @@ virtio_transport_dgram_enqueue(struct vsock_sock *vsk,
void virtio_transport_destruct(struct vsock_sock *vsk);
-void virtio_transport_recv_pkt(struct virtio_vsock_pkt *pkt);
+void virtio_transport_recv_pkt(struct virtio_transport *t,
+ struct virtio_vsock_pkt *pkt);
void virtio_transport_free_pkt(struct virtio_vsock_pkt *pkt);
void virtio_transport_inc_tx_pkt(struct virtio_vsock_sock *vvs, struct virtio_vsock_pkt *pkt);
u32 virtio_transport_get_credit(struct virtio_vsock_sock *vvs, u32 wanted);
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 4bc217ef56945..cc70d651d13e0 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -87,33 +87,6 @@ static u32 virtio_transport_get_local_cid(void)
return ret;
}
-static void virtio_transport_loopback_work(struct work_struct *work)
-{
- struct virtio_vsock *vsock =
- container_of(work, struct virtio_vsock, loopback_work);
- LIST_HEAD(pkts);
-
- spin_lock_bh(&vsock->loopback_list_lock);
- list_splice_init(&vsock->loopback_list, &pkts);
- spin_unlock_bh(&vsock->loopback_list_lock);
-
- mutex_lock(&vsock->rx_lock);
-
- if (!vsock->rx_run)
- goto out;
-
- while (!list_empty(&pkts)) {
- struct virtio_vsock_pkt *pkt;
-
- pkt = list_first_entry(&pkts, struct virtio_vsock_pkt, list);
- list_del_init(&pkt->list);
-
- virtio_transport_recv_pkt(pkt);
- }
-out:
- mutex_unlock(&vsock->rx_lock);
-}
-
static int virtio_transport_send_pkt_loopback(struct virtio_vsock *vsock,
struct virtio_vsock_pkt *pkt)
{
@@ -370,59 +343,6 @@ static bool virtio_transport_more_replies(struct virtio_vsock *vsock)
return val < virtqueue_get_vring_size(vq);
}
-static void virtio_transport_rx_work(struct work_struct *work)
-{
- struct virtio_vsock *vsock =
- container_of(work, struct virtio_vsock, rx_work);
- struct virtqueue *vq;
-
- vq = vsock->vqs[VSOCK_VQ_RX];
-
- mutex_lock(&vsock->rx_lock);
-
- if (!vsock->rx_run)
- goto out;
-
- do {
- virtqueue_disable_cb(vq);
- for (;;) {
- struct virtio_vsock_pkt *pkt;
- unsigned int len;
-
- if (!virtio_transport_more_replies(vsock)) {
- /* Stop rx until the device processes already
- * pending replies. Leave rx virtqueue
- * callbacks disabled.
- */
- goto out;
- }
-
- pkt = virtqueue_get_buf(vq, &len);
- if (!pkt) {
- break;
- }
-
- vsock->rx_buf_nr--;
-
- /* Drop short/long packets */
- if (unlikely(len < sizeof(pkt->hdr) ||
- len > sizeof(pkt->hdr) + pkt->len)) {
- virtio_transport_free_pkt(pkt);
- continue;
- }
-
- pkt->len = len - sizeof(pkt->hdr);
- virtio_transport_deliver_tap_pkt(pkt);
- virtio_transport_recv_pkt(pkt);
- }
- } while (!virtqueue_enable_cb(vq));
-
-out:
- if (vsock->rx_buf_nr < vsock->rx_buf_max_nr / 2)
- virtio_vsock_rx_fill(vsock);
- mutex_unlock(&vsock->rx_lock);
-}
-
/* event_lock must be held */
static int virtio_vsock_event_fill_one(struct virtio_vsock *vsock,
struct virtio_vsock_event *event)
@@ -586,6 +506,86 @@ static struct virtio_transport virtio_transport = {
.send_pkt = virtio_transport_send_pkt,
};
+static void virtio_transport_loopback_work(struct work_struct *work)
+{
+ struct virtio_vsock *vsock =
+ container_of(work, struct virtio_vsock, loopback_work);
+ LIST_HEAD(pkts);
+
+ spin_lock_bh(&vsock->loopback_list_lock);
+ list_splice_init(&vsock->loopback_list, &pkts);
+ spin_unlock_bh(&vsock->loopback_list_lock);
+
+ mutex_lock(&vsock->rx_lock);
+
+ if (!vsock->rx_run)
+ goto out;
+
+ while (!list_empty(&pkts)) {
+ struct virtio_vsock_pkt *pkt;
+
+ pkt = list_first_entry(&pkts, struct virtio_vsock_pkt, list);
+ list_del_init(&pkt->list);
+
+ virtio_transport_recv_pkt(&virtio_transport, pkt);
+ }
+out:
+ mutex_unlock(&vsock->rx_lock);
+}
+
+static void virtio_transport_rx_work(struct work_struct *work)
+{
+ struct virtio_vsock *vsock =
+ container_of(work, struct virtio_vsock, rx_work);
+ struct virtqueue *vq;
+
+ vq = vsock->vqs[VSOCK_VQ_RX];
+
+ mutex_lock(&vsock->rx_lock);
+
+ if (!vsock->rx_run)
+ goto out;
+
+ do {
+ virtqueue_disable_cb(vq);
+ for (;;) {
+ struct virtio_vsock_pkt *pkt;
+ unsigned int len;
+
+ if (!virtio_transport_more_replies(vsock)) {
+ /* Stop rx until the device processes already
+ * pending replies. Leave rx virtqueue
+ * callbacks disabled.
+ */
+ goto out;
+ }
+
+ pkt = virtqueue_get_buf(vq, &len);
+ if (!pkt) {
+ break;
+ }
+
+ vsock->rx_buf_nr--;
+
+ /* Drop short/long packets */
+ if (unlikely(len < sizeof(pkt->hdr) ||
+ len > sizeof(pkt->hdr) + pkt->len)) {
+ virtio_transport_free_pkt(pkt);
+ continue;
+ }
+
+ pkt->len = len - sizeof(pkt->hdr);
+ virtio_transport_deliver_tap_pkt(pkt);
+ virtio_transport_recv_pkt(&virtio_transport, pkt);
+ }
+ } while (!virtqueue_enable_cb(vq));
+
+out:
+ if (vsock->rx_buf_nr < vsock->rx_buf_max_nr / 2)
+ virtio_vsock_rx_fill(vsock);
+ mutex_unlock(&vsock->rx_lock);
+}
+
static int virtio_vsock_probe(struct virtio_device *vdev)
{
vq_callback_t *callbacks[] = {
diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index 52242a148c705..fae2bded5d519 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -669,9 +669,9 @@ static int virtio_transport_reset(struct vsock_sock *vsk,
/* Normally packets are associated with a socket. There may be no socket if an
* attempt was made to connect to a socket that does not exist.
*/
-static int virtio_transport_reset_no_sock(struct virtio_vsock_pkt *pkt)
+static int virtio_transport_reset_no_sock(const struct virtio_transport *t,
+ struct virtio_vsock_pkt *pkt)
{
- const struct virtio_transport *t;
struct virtio_vsock_pkt *reply;
struct virtio_vsock_pkt_info info = {
.op = VIRTIO_VSOCK_OP_RST,
@@ -691,7 +691,6 @@ static int virtio_transport_reset_no_sock(struct virtio_vsock_pkt *pkt)
if (!reply)
return -ENOMEM;
- t = virtio_transport_get_ops();
if (!t) {
virtio_transport_free_pkt(reply);
return -ENOTCONN;
@@ -993,7 +992,8 @@ static bool virtio_transport_space_update(struct sock *sk,
/* We are under the virtio-vsock's vsock->rx_lock or vhost-vsock's vq->mutex
* lock.
*/
-void virtio_transport_recv_pkt(struct virtio_vsock_pkt *pkt)
+void virtio_transport_recv_pkt(struct virtio_transport *t,
+ struct virtio_vsock_pkt *pkt)
{
struct sockaddr_vm src, dst;
struct vsock_sock *vsk;
@@ -1015,7 +1015,7 @@ void virtio_transport_recv_pkt(struct virtio_vsock_pkt *pkt)
le32_to_cpu(pkt->hdr.fwd_cnt));
if (le16_to_cpu(pkt->hdr.type) != VIRTIO_VSOCK_TYPE_STREAM) {
- (void)virtio_transport_reset_no_sock(pkt);
+ (void)virtio_transport_reset_no_sock(t, pkt);
goto free_pkt;
}
@@ -1026,7 +1026,7 @@ void virtio_transport_recv_pkt(struct virtio_vsock_pkt *pkt)
if (!sk) {
sk = vsock_find_bound_socket(&dst);
if (!sk) {
- (void)virtio_transport_reset_no_sock(pkt);
+ (void)virtio_transport_reset_no_sock(t, pkt);
goto free_pkt;
}
}
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 83f9a9c8c1edc222846dc1bde6e3479703e8e5a3 ]
This driver is a virtual driver stacked on top of Ethernet interfaces.
When this driver transmits data on the Ethernet device, the skb->protocol
setting is inconsistent with the Ethernet header prepended to the skb.
This causes a user listening on the Ethernet interface with an AF_PACKET
socket, to see different sll_protocol values for incoming and outgoing
frames, because incoming frames would have this value set by parsing the
Ethernet header.
This patch changes the skb->protocol value for outgoing Ethernet frames,
making it consistent with the Ethernet header prepended. This makes a
user listening on the Ethernet device with an AF_PACKET socket, to see
the same sll_protocol value for incoming and outgoing frames.
Cc: Martin Schiller <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/lapbether.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 15177a54b17d7..e5fc1b95cea6a 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -201,8 +201,6 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
struct net_device *dev;
int size = skb->len;
- skb->protocol = htons(ETH_P_X25);
-
ptr = skb_push(skb, 2);
*ptr++ = size % 256;
@@ -213,6 +211,8 @@ static void lapbeth_data_transmit(struct net_device *ndev, struct sk_buff *skb)
skb->dev = dev = lapbeth->ethdev;
+ skb->protocol = htons(ETH_P_DEC);
+
skb_reset_network_header(skb);
dev_hard_header(skb, dev, ETH_P_DEC, bcast_addr, NULL, 0);
--
2.25.1
From: Felix Fietkau <[email protected]>
[ Upstream commit 3bd5c7a28a7c3aba07a2d300d43f8e988809e147 ]
Limit maximum VHT MPDU size by local capability.
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/vht.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index 259325cbcc314..4d154efb80c88 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -170,10 +170,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
/* take some capabilities as-is */
cap_info = le32_to_cpu(vht_cap_ie->vht_cap_info);
vht_cap->cap = cap_info;
- vht_cap->cap &= IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 |
- IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
- IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 |
- IEEE80211_VHT_CAP_RXLDPC |
+ vht_cap->cap &= IEEE80211_VHT_CAP_RXLDPC |
IEEE80211_VHT_CAP_VHT_TXOP_PS |
IEEE80211_VHT_CAP_HTC_VHT |
IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK |
@@ -182,6 +179,9 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN;
+ vht_cap->cap |= min_t(u32, cap_info & IEEE80211_VHT_CAP_MAX_MPDU_MASK,
+ own_cap.cap & IEEE80211_VHT_CAP_MAX_MPDU_MASK);
+
/* and some based on our own capabilities */
switch (own_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) {
case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ:
--
2.25.1
From: Xie He <[email protected]>
[ Upstream commit 9fb030a70431a2a2a1b292dbf0b2f399cc072c16 ]
This patch sets skb->protocol before transmitting frames on the HDLC
device, so that a user listening on the HDLC device with an AF_PACKET
socket will see outgoing frames' sll_protocol field correctly set and
consistent with that of incoming frames.
1. Control frames in hdlc_cisco and hdlc_ppp
When these drivers send control frames, skb->protocol is not set.
This value should be set to htons(ETH_P_HDLC), because when receiving
control frames, their skb->protocol is set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, which then calls
cisco_type_trans or ppp_type_trans. The skb->protocol of control frames
is set to htons(ETH_P_HDLC) so that the control frames can be received
by hdlc_rcv in hdlc.c, which calls cisco_rx or ppp_rx to process the
control frames.
2. hdlc_fr
When this driver sends control frames, skb->protocol is set to internal
values used in this driver.
When this driver sends data frames (from upper stacked PVC devices),
skb->protocol is the same as that of the user data packet being sent on
the upper PVC device (for normal PVC devices), or is htons(ETH_P_802_3)
(for Ethernet-emulating PVC devices).
However, skb->protocol for both control frames and data frames should be
set to htons(ETH_P_HDLC), because when receiving, all frames received on
the HDLC device will have their skb->protocol set to htons(ETH_P_HDLC).
When receiving, hdlc_type_trans in hdlc.h is called, and because this
driver doesn't provide a type_trans function in struct hdlc_proto,
all frames will have their skb->protocol set to htons(ETH_P_HDLC).
The frames are then received by hdlc_rcv in hdlc.c, which calls fr_rx
to process the frames (control frames are consumed and data frames
are re-received on upper PVC devices).
Cc: Krzysztof Halasa <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/hdlc_cisco.c | 1 +
drivers/net/wan/hdlc_fr.c | 3 +++
drivers/net/wan/hdlc_ppp.c | 1 +
3 files changed, 5 insertions(+)
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index c169a26e5359a..2c6e3fa6947a0 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -121,6 +121,7 @@ static void cisco_keepalive_send(struct net_device *dev, u32 type,
skb_put(skb, sizeof(struct cisco_packet));
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
dev_queue_xmit(skb);
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 67f89917277ce..03b5f5cce6f47 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -436,6 +436,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
if (pvc->state.fecn) /* TX Congestion counter */
dev->stats.tx_compressed++;
skb->dev = pvc->frad;
+ skb->protocol = htons(ETH_P_HDLC);
+ skb_reset_network_header(skb);
dev_queue_xmit(skb);
return NETDEV_TX_OK;
}
@@ -558,6 +560,7 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
skb_put(skb, i);
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
dev_queue_xmit(skb);
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 85844f26547dd..20d9b6585fba3 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -254,6 +254,7 @@ static void ppp_tx_cp(struct net_device *dev, u16 pid, u8 code,
skb->priority = TC_PRIO_CONTROL;
skb->dev = dev;
+ skb->protocol = htons(ETH_P_HDLC);
skb_reset_network_header(skb);
skb_queue_tail(&tx_queue, skb);
}
--
2.25.1
From: Stefano Garzarella <[email protected]>
[ Upstream commit 9c7a5582f5d720dc35cfcc42ccaded69f0642e4a ]
Some callbacks used by the upper layers can run while we are in the
.remove(). A potential use-after-free can happen, because we free
the_virtio_vsock without knowing if the callbacks are over or not.
To solve this issue we move the assignment of the_virtio_vsock at the
end of .probe(), when we finished all the initialization, and at the
beginning of .remove(), before to release resources.
For the same reason, we do the same also for the vdev->priv.
We use RCU to be sure that all callbacks that use the_virtio_vsock
ended before freeing it. This is not required for callbacks that
use vdev->priv, because after the vdev->config->del_vqs() we are sure
that they are ended and will no longer be invoked.
We also take the mutex during the .remove() to avoid that .probe() can
run while we are resetting the device.
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 70 +++++++++++++++++++++-----------
1 file changed, 46 insertions(+), 24 deletions(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 96ab344f17bbc..68186419c445f 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -66,19 +66,22 @@ struct virtio_vsock {
u32 guest_cid;
};
-static struct virtio_vsock *virtio_vsock_get(void)
-{
- return the_virtio_vsock;
-}
-
static u32 virtio_transport_get_local_cid(void)
{
- struct virtio_vsock *vsock = virtio_vsock_get();
+ struct virtio_vsock *vsock;
+ u32 ret;
- if (!vsock)
- return VMADDR_CID_ANY;
+ rcu_read_lock();
+ vsock = rcu_dereference(the_virtio_vsock);
+ if (!vsock) {
+ ret = VMADDR_CID_ANY;
+ goto out_rcu;
+ }
- return vsock->guest_cid;
+ ret = vsock->guest_cid;
+out_rcu:
+ rcu_read_unlock();
+ return ret;
}
static void virtio_transport_loopback_work(struct work_struct *work)
@@ -198,14 +201,18 @@ virtio_transport_send_pkt(struct virtio_vsock_pkt *pkt)
struct virtio_vsock *vsock;
int len = pkt->len;
- vsock = virtio_vsock_get();
+ rcu_read_lock();
+ vsock = rcu_dereference(the_virtio_vsock);
if (!vsock) {
virtio_transport_free_pkt(pkt);
- return -ENODEV;
+ len = -ENODEV;
+ goto out_rcu;
}
- if (le64_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid)
- return virtio_transport_send_pkt_loopback(vsock, pkt);
+ if (le64_to_cpu(pkt->hdr.dst_cid) == vsock->guest_cid) {
+ len = virtio_transport_send_pkt_loopback(vsock, pkt);
+ goto out_rcu;
+ }
if (pkt->reply)
atomic_inc(&vsock->queued_replies);
@@ -215,6 +222,9 @@ virtio_transport_send_pkt(struct virtio_vsock_pkt *pkt)
spin_unlock_bh(&vsock->send_pkt_list_lock);
queue_work(virtio_vsock_workqueue, &vsock->send_pkt_work);
+
+out_rcu:
+ rcu_read_unlock();
return len;
}
@@ -223,12 +233,14 @@ virtio_transport_cancel_pkt(struct vsock_sock *vsk)
{
struct virtio_vsock *vsock;
struct virtio_vsock_pkt *pkt, *n;
- int cnt = 0;
+ int cnt = 0, ret;
LIST_HEAD(freeme);
- vsock = virtio_vsock_get();
+ rcu_read_lock();
+ vsock = rcu_dereference(the_virtio_vsock);
if (!vsock) {
- return -ENODEV;
+ ret = -ENODEV;
+ goto out_rcu;
}
spin_lock_bh(&vsock->send_pkt_list_lock);
@@ -256,7 +268,11 @@ virtio_transport_cancel_pkt(struct vsock_sock *vsk)
queue_work(virtio_vsock_workqueue, &vsock->rx_work);
}
- return 0;
+ ret = 0;
+
+out_rcu:
+ rcu_read_unlock();
+ return ret;
}
static void virtio_vsock_rx_fill(struct virtio_vsock *vsock)
@@ -566,7 +582,8 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
return ret;
/* Only one virtio-vsock device per guest is supported */
- if (the_virtio_vsock) {
+ if (rcu_dereference_protected(the_virtio_vsock,
+ lockdep_is_held(&the_virtio_vsock_mutex))) {
ret = -EBUSY;
goto out;
}
@@ -591,8 +608,6 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
vsock->rx_buf_max_nr = 0;
atomic_set(&vsock->queued_replies, 0);
- vdev->priv = vsock;
- the_virtio_vsock = vsock;
mutex_init(&vsock->tx_lock);
mutex_init(&vsock->rx_lock);
mutex_init(&vsock->event_lock);
@@ -614,6 +629,9 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
virtio_vsock_event_fill(vsock);
mutex_unlock(&vsock->event_lock);
+ vdev->priv = vsock;
+ rcu_assign_pointer(the_virtio_vsock, vsock);
+
mutex_unlock(&the_virtio_vsock_mutex);
return 0;
@@ -628,6 +646,12 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
struct virtio_vsock *vsock = vdev->priv;
struct virtio_vsock_pkt *pkt;
+ mutex_lock(&the_virtio_vsock_mutex);
+
+ vdev->priv = NULL;
+ rcu_assign_pointer(the_virtio_vsock, NULL);
+ synchronize_rcu();
+
flush_work(&vsock->loopback_work);
flush_work(&vsock->rx_work);
flush_work(&vsock->tx_work);
@@ -667,12 +691,10 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
}
spin_unlock_bh(&vsock->loopback_list_lock);
- mutex_lock(&the_virtio_vsock_mutex);
- the_virtio_vsock = NULL;
- mutex_unlock(&the_virtio_vsock_mutex);
-
vdev->config->del_vqs(vdev);
+ mutex_unlock(&the_virtio_vsock_mutex);
+
kfree(vsock);
}
--
2.25.1
From: Sebastien Boeuf <[email protected]>
[ Upstream commit df12eb6d6cd920ab2f0e0a43cd6e1c23a05cea91 ]
Whenever the vsock backend on the host sends a packet through the RX
queue, it expects an answer on the TX queue. Unfortunately, there is one
case where the host side will hang waiting for the answer and might
effectively never recover if no timeout mechanism was implemented.
This issue happens when the guest side starts binding to the socket,
which insert a new bound socket into the list of already bound sockets.
At this time, we expect the guest to also start listening, which will
trigger the sk_state to move from TCP_CLOSE to TCP_LISTEN. The problem
occurs if the host side queued a RX packet and triggered an interrupt
right between the end of the binding process and the beginning of the
listening process. In this specific case, the function processing the
packet virtio_transport_recv_pkt() will find a bound socket, which means
it will hit the switch statement checking for the sk_state, but the
state won't be changed into TCP_LISTEN yet, which leads the code to pick
the default statement. This default statement will only free the buffer,
while it should also respond to the host side, by sending a packet on
its TX queue.
In order to simply fix this unfortunate chain of events, it is important
that in case the default statement is entered, and because at this stage
we know the host side is waiting for an answer, we must send back a
packet containing the operation VIRTIO_VSOCK_OP_RST.
One could say that a proper timeout mechanism on the host side will be
enough to avoid the backend to hang. But the point of this patch is to
ensure the normal use case will be provided with proper responsiveness
when it comes to establishing the connection.
Signed-off-by: Sebastien Boeuf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport_common.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c
index fae2bded5d519..5f8a72d34d313 100644
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -1060,6 +1060,7 @@ void virtio_transport_recv_pkt(struct virtio_transport *t,
virtio_transport_free_pkt(pkt);
break;
default:
+ (void)virtio_transport_reset_no_sock(t, pkt);
virtio_transport_free_pkt(pkt);
break;
}
--
2.25.1
From: Yu Kuai <[email protected]>
[ Upstream commit 1a26044954a6d1f4d375d5e62392446af663be7a ]
if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: aa759fd376fb ("iommu/exynos: Add callback for initializing devices from device tree")
Signed-off-by: Yu Kuai <[email protected]>
Acked-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/exynos-iommu.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/exynos-iommu.c b/drivers/iommu/exynos-iommu.c
index 1bd0cd7168dfc..4bf6049dd2c79 100644
--- a/drivers/iommu/exynos-iommu.c
+++ b/drivers/iommu/exynos-iommu.c
@@ -1302,13 +1302,17 @@ static int exynos_iommu_of_xlate(struct device *dev,
return -ENODEV;
data = platform_get_drvdata(sysmmu);
- if (!data)
+ if (!data) {
+ put_device(&sysmmu->dev);
return -ENODEV;
+ }
if (!owner) {
owner = kzalloc(sizeof(*owner), GFP_KERNEL);
- if (!owner)
+ if (!owner) {
+ put_device(&sysmmu->dev);
return -ENOMEM;
+ }
INIT_LIST_HEAD(&owner->controllers);
mutex_init(&owner->rpm_lock);
--
2.25.1
From: Laurent Dufour <[email protected]>
commit f85086f95fa36194eb0db5cd5c12e56801b98523 upstream.
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: Nathan Lynch <[email protected]>
Cc: Scott Cheloha <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/base/node.c | 84 ++++++++++++++++++++++++++++++++-------------------
include/linux/node.h | 11 ++++--
mm/memory_hotplug.c | 3 +
3 files changed, 63 insertions(+), 35 deletions(-)
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -403,10 +403,32 @@ static int __ref get_nid_for_pfn(unsigne
return pfn_to_nid(pfn);
}
+static int do_register_memory_block_under_node(int nid,
+ struct memory_block *mem_blk)
+{
+ int ret;
+
+ /*
+ * If this memory block spans multiple nodes, we only indicate
+ * the last processed node.
+ */
+ mem_blk->nid = nid;
+
+ ret = sysfs_create_link_nowarn(&node_devices[nid]->dev.kobj,
+ &mem_blk->dev.kobj,
+ kobject_name(&mem_blk->dev.kobj));
+ if (ret)
+ return ret;
+
+ return sysfs_create_link_nowarn(&mem_blk->dev.kobj,
+ &node_devices[nid]->dev.kobj,
+ kobject_name(&node_devices[nid]->dev.kobj));
+}
+
/* register memory section under specified node if it spans that node */
-int register_mem_sect_under_node(struct memory_block *mem_blk, void *arg)
+int register_mem_block_under_node_early(struct memory_block *mem_blk, void *arg)
{
- int ret, nid = *(int *)arg;
+ int nid = *(int *)arg;
unsigned long pfn, sect_start_pfn, sect_end_pfn;
sect_start_pfn = section_nr_to_pfn(mem_blk->start_section_nr);
@@ -426,39 +448,34 @@ int register_mem_sect_under_node(struct
}
/*
- * We need to check if page belongs to nid only for the boot
- * case, during hotplug we know that all pages in the memory
- * block belong to the same node.
- */
- if (system_state == SYSTEM_BOOTING) {
- page_nid = get_nid_for_pfn(pfn);
- if (page_nid < 0)
- continue;
- if (page_nid != nid)
- continue;
- }
-
- /*
- * If this memory block spans multiple nodes, we only indicate
- * the last processed node.
+ * We need to check if page belongs to nid only at the boot
+ * case because node's ranges can be interleaved.
*/
- mem_blk->nid = nid;
-
- ret = sysfs_create_link_nowarn(&node_devices[nid]->dev.kobj,
- &mem_blk->dev.kobj,
- kobject_name(&mem_blk->dev.kobj));
- if (ret)
- return ret;
+ page_nid = get_nid_for_pfn(pfn);
+ if (page_nid < 0)
+ continue;
+ if (page_nid != nid)
+ continue;
- return sysfs_create_link_nowarn(&mem_blk->dev.kobj,
- &node_devices[nid]->dev.kobj,
- kobject_name(&node_devices[nid]->dev.kobj));
+ return do_register_memory_block_under_node(nid, mem_blk);
}
/* mem section does not span the specified node */
return 0;
}
/*
+ * During hotplug we know that all pages in the memory block belong to the same
+ * node.
+ */
+static int register_mem_block_under_node_hotplug(struct memory_block *mem_blk,
+ void *arg)
+{
+ int nid = *(int *)arg;
+
+ return do_register_memory_block_under_node(nid, mem_blk);
+}
+
+/*
* Unregister a memory block device under the node it spans. Memory blocks
* with multiple nodes cannot be offlined and therefore also never be removed.
*/
@@ -473,10 +490,17 @@ void unregister_memory_block_under_nodes
kobject_name(&node_devices[mem_blk->nid]->dev.kobj));
}
-int link_mem_sections(int nid, unsigned long start_pfn, unsigned long end_pfn)
+int link_mem_sections(int nid, unsigned long start_pfn, unsigned long end_pfn,
+ enum meminit_context context)
{
- return walk_memory_range(start_pfn, end_pfn, (void *)&nid,
- register_mem_sect_under_node);
+ walk_memory_blocks_func_t func;
+
+ if (context == MEMINIT_HOTPLUG)
+ func = register_mem_block_under_node_hotplug;
+ else
+ func = register_mem_block_under_node_early;
+
+ return walk_memory_range(start_pfn, end_pfn, (void *)&nid, func);
}
#ifdef CONFIG_HUGETLBFS
--- a/include/linux/node.h
+++ b/include/linux/node.h
@@ -32,11 +32,13 @@ extern struct node *node_devices[];
typedef void (*node_registration_func_t)(struct node *);
#if defined(CONFIG_MEMORY_HOTPLUG_SPARSE) && defined(CONFIG_NUMA)
-extern int link_mem_sections(int nid, unsigned long start_pfn,
- unsigned long end_pfn);
+int link_mem_sections(int nid, unsigned long start_pfn,
+ unsigned long end_pfn,
+ enum meminit_context context);
#else
static inline int link_mem_sections(int nid, unsigned long start_pfn,
- unsigned long end_pfn)
+ unsigned long end_pfn,
+ enum meminit_context context)
{
return 0;
}
@@ -61,7 +63,8 @@ static inline int register_one_node(int
if (error)
return error;
/* link memory sections under this node */
- error = link_mem_sections(nid, start_pfn, end_pfn);
+ error = link_mem_sections(nid, start_pfn, end_pfn,
+ MEMINIT_EARLY);
}
return error;
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1102,7 +1102,8 @@ int __ref add_memory_resource(int nid, s
}
/* link memory sections under this node.*/
- ret = link_mem_sections(nid, PFN_DOWN(start), PFN_UP(start + size - 1));
+ ret = link_mem_sections(nid, PFN_DOWN(start), PFN_UP(start + size - 1),
+ MEMINIT_HOTPLUG);
BUG_ON(ret);
/* create new memmap entry */
From: Laurent Dufour <[email protected]>
commit c1d0da83358a2316d9be7f229f26126dbaa07468 upstream.
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <[email protected]>
Signed-off-by: Laurent Dufour <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Rafael J . Wysocki" <[email protected]>
Cc: Nathan Lynch <[email protected]>
Cc: Scott Cheloha <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Fenghua Yu <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/ia64/mm/init.c | 6 +++---
include/linux/mm.h | 2 +-
include/linux/mmzone.h | 11 ++++++++---
mm/memory_hotplug.c | 2 +-
mm/page_alloc.c | 11 ++++++-----
5 files changed, 19 insertions(+), 13 deletions(-)
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -499,7 +499,7 @@ virtual_memmap_init(u64 start, u64 end,
if (map_start < map_end)
memmap_init_zone((unsigned long)(map_end - map_start),
args->nid, args->zone, page_to_pfn(map_start),
- MEMMAP_EARLY, NULL);
+ MEMINIT_EARLY, NULL);
return 0;
}
@@ -508,8 +508,8 @@ memmap_init (unsigned long size, int nid
unsigned long start_pfn)
{
if (!vmem_map) {
- memmap_init_zone(size, nid, zone, start_pfn, MEMMAP_EARLY,
- NULL);
+ memmap_init_zone(size, nid, zone, start_pfn,
+ MEMINIT_EARLY, NULL);
} else {
struct page *start;
struct memmap_init_callback_data args;
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2179,7 +2179,7 @@ static inline void zero_resv_unavail(voi
extern void set_dma_reserve(unsigned long new_dma_reserve);
extern void memmap_init_zone(unsigned long, int, unsigned long, unsigned long,
- enum memmap_context, struct vmem_altmap *);
+ enum meminit_context, struct vmem_altmap *);
extern void setup_per_zone_wmarks(void);
extern int __meminit init_per_zone_wmark_min(void);
extern void mem_init(void);
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -759,10 +759,15 @@ bool zone_watermark_ok(struct zone *z, u
unsigned int alloc_flags);
bool zone_watermark_ok_safe(struct zone *z, unsigned int order,
unsigned long mark, int classzone_idx);
-enum memmap_context {
- MEMMAP_EARLY,
- MEMMAP_HOTPLUG,
+/*
+ * Memory initialization context, use to differentiate memory added by
+ * the platform statically or via memory hotplug interface.
+ */
+enum meminit_context {
+ MEMINIT_EARLY,
+ MEMINIT_HOTPLUG,
};
+
extern void init_currently_empty_zone(struct zone *zone, unsigned long start_pfn,
unsigned long size);
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -733,7 +733,7 @@ void __ref move_pfn_range_to_zone(struct
* are reserved so nobody should be touching them so we should be safe
*/
memmap_init_zone(nr_pages, nid, zone_idx(zone), start_pfn,
- MEMMAP_HOTPLUG, altmap);
+ MEMINIT_HOTPLUG, altmap);
set_zone_contiguous(zone);
}
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5480,7 +5480,7 @@ void __ref build_all_zonelists(pg_data_t
* done. Non-atomic initialization, single-pass.
*/
void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
- unsigned long start_pfn, enum memmap_context context,
+ unsigned long start_pfn, enum meminit_context context,
struct vmem_altmap *altmap)
{
unsigned long end_pfn = start_pfn + size;
@@ -5507,7 +5507,7 @@ void __meminit memmap_init_zone(unsigned
* There can be holes in boot-time mem_map[]s handed to this
* function. They do not exist on hotplugged memory.
*/
- if (context != MEMMAP_EARLY)
+ if (context != MEMINIT_EARLY)
goto not_early;
if (!early_pfn_valid(pfn))
@@ -5542,7 +5542,7 @@ void __meminit memmap_init_zone(unsigned
not_early:
page = pfn_to_page(pfn);
__init_single_page(page, pfn, zone, nid);
- if (context == MEMMAP_HOTPLUG)
+ if (context == MEMINIT_HOTPLUG)
SetPageReserved(page);
/*
@@ -5557,7 +5557,7 @@ not_early:
* check here not to call set_pageblock_migratetype() against
* pfn out of zone.
*
- * Please note that MEMMAP_HOTPLUG path doesn't clear memmap
+ * Please note that MEMINIT_HOTPLUG path doesn't clear memmap
* because this is done early in sparse_add_one_section
*/
if (!(pfn & (pageblock_nr_pages - 1))) {
@@ -5578,7 +5578,8 @@ static void __meminit zone_init_free_lis
#ifndef __HAVE_ARCH_MEMMAP_INIT
#define memmap_init(size, nid, zone, start_pfn) \
- memmap_init_zone((size), (nid), (zone), (start_pfn), MEMMAP_EARLY, NULL)
+ memmap_init_zone((size), (nid), (zone), (start_pfn), \
+ MEMINIT_EARLY, NULL)
#endif
static int zone_batchsize(struct zone *zone)
From: Thibaut Sautereau <[email protected]>
[ Upstream commit 09a6b0bc3be793ca8cba580b7992d73e9f68f15d ]
Commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e62 ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
>From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes: 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <[email protected]>
Cc: Emese Revfy <[email protected]>
Signed-off-by: Thibaut Sautereau <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
lib/random32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/random32.c b/lib/random32.c
index 036de0c93e224..b6f3325e38e43 100644
--- a/lib/random32.c
+++ b/lib/random32.c
@@ -48,7 +48,7 @@ static inline void prandom_state_selftest(void)
}
#endif
-DEFINE_PER_CPU(struct rnd_state, net_rand_state);
+DEFINE_PER_CPU(struct rnd_state, net_rand_state) __latent_entropy;
/**
* prandom_u32_state - seeded pseudo-random number generator.
--
2.25.1
From: Chaitanya Kulkarni <[email protected]>
[ Upstream commit 52a3974feb1a3eec25d8836d37a508b67b0a9cd0 ]
Get and put the reference to the ctrl in the nvme_dev_open() and
nvme_dev_release() before and after module get/put for ctrl in char
device file operations.
Introduce char_dev relase function, get/put the controller and module
which allows us to fix the potential Oops which can be easily reproduced
with a passthru ctrl (although the problem also exists with pure user
access):
Entering kdb (current=0xffff8887f8290000, pid 3128) on processor 30 Oops: (null)
due to oops @ 0xffffffffa01019ad
CPU: 30 PID: 3128 Comm: bash Tainted: G W OE 5.8.0-rc4nvme-5.9+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.4
RIP: 0010:nvme_free_ctrl+0x234/0x285 [nvme_core]
Code: 57 10 a0 e8 73 bf 02 e1 ba 3d 11 00 00 48 c7 c6 98 33 10 a0 48 c7 c7 1d 57 10 a0 e8 5b bf 02 e1 8
RSP: 0018:ffffc90001d63de0 EFLAGS: 00010246
RAX: ffffffffa05c0440 RBX: ffff8888119e45a0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8888177e9550 RDI: ffff8888119e43b0
RBP: ffff8887d4768000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffc90001d63c90 R12: ffff8888119e43b0
R13: ffff8888119e5108 R14: dead000000000100 R15: ffff8888119e5108
FS: 00007f1ef27b0740(0000) GS:ffff888817600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa05c0470 CR3: 00000007f6bee000 CR4: 00000000003406e0
Call Trace:
device_release+0x27/0x80
kobject_put+0x98/0x170
nvmet_passthru_ctrl_disable+0x4a/0x70 [nvmet]
nvmet_passthru_enable_store+0x4c/0x90 [nvmet]
configfs_write_file+0xe6/0x150
vfs_write+0xba/0x1e0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f1ef1eb2840
Code: Bad RIP value.
RSP: 002b:00007fffdbff0eb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1ef1eb2840
RDX: 0000000000000002 RSI: 00007f1ef27d2000 RDI: 0000000000000001
RBP: 00007f1ef27d2000 R08: 000000000000000a R09: 00007f1ef27b0740
R10: 0000000000000001 R11: 0000000000000246 R12: 00007f1ef2186400
R13: 0000000000000002 R14: 0000000000000001 R15: 0000000000000000
With this patch fix we take the module ref count in nvme_dev_open() and
release that ref count in newly introduced nvme_dev_release().
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 33dad9774da01..9ea3d8e611005 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2605,10 +2605,24 @@ static int nvme_dev_open(struct inode *inode, struct file *file)
return -EWOULDBLOCK;
}
+ nvme_get_ctrl(ctrl);
+ if (!try_module_get(ctrl->ops->module))
+ return -EINVAL;
+
file->private_data = ctrl;
return 0;
}
+static int nvme_dev_release(struct inode *inode, struct file *file)
+{
+ struct nvme_ctrl *ctrl =
+ container_of(inode->i_cdev, struct nvme_ctrl, cdev);
+
+ module_put(ctrl->ops->module);
+ nvme_put_ctrl(ctrl);
+ return 0;
+}
+
static int nvme_dev_user_cmd(struct nvme_ctrl *ctrl, void __user *argp)
{
struct nvme_ns *ns;
@@ -2669,6 +2683,7 @@ static long nvme_dev_ioctl(struct file *file, unsigned int cmd,
static const struct file_operations nvme_dev_fops = {
.owner = THIS_MODULE,
.open = nvme_dev_open,
+ .release = nvme_dev_release,
.unlocked_ioctl = nvme_dev_ioctl,
.compat_ioctl = nvme_dev_ioctl,
};
--
2.25.1
From: Nicolas VINCENT <[email protected]>
[ Upstream commit a2bd970aa62f2f7f80fd0d212b1d4ccea5df4aed ]
the i2c_ram structure is missing the sdmatmp field mentionned in
datasheet for MPC8272 at paragraph 36.5. With this field missing, the
hardware would write past the allocated memory done through
cpm_muram_alloc for the i2c_ram structure and land in memory allocated
for the buffers descriptors corrupting the cbd_bufaddr field. Since this
field is only set during setup(), the first i2c transaction would work
and the following would send data read from an arbitrary memory
location.
Fixes: 61045dbe9d8d ("i2c: Add support for I2C bus on Freescale CPM1/CPM2 controllers")
Signed-off-by: Nicolas VINCENT <[email protected]>
Acked-by: Jochen Friedrich <[email protected]>
Acked-by: Christophe Leroy <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-cpm.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 8a8ca945561b0..7eba874a981d3 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -74,6 +74,9 @@ struct i2c_ram {
char res1[4]; /* Reserved */
ushort rpbase; /* Relocation pointer */
char res2[2]; /* Reserved */
+ /* The following elements are only for CPM2 */
+ char res3[4]; /* Reserved */
+ uint sdmatmp; /* Internal */
};
#define I2COM_START 0x80
--
2.25.1
From: Martin Cerveny <[email protected]>
[ Upstream commit 74ea06164cda81dc80e97790164ca533fd7e3087 ]
Better guess. Secondary CSC registers are from 0xF0000.
Signed-off-by: Martin Cerveny <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun8i_mixer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
index 71a798e5d5591..649b57e5e4b78 100644
--- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
+++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
@@ -364,7 +364,7 @@ static struct regmap_config sun8i_mixer_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
- .max_register = 0xbfffc, /* guessed */
+ .max_register = 0xffffc, /* guessed */
};
static int sun8i_mixer_of_get_id(struct device_node *node)
--
2.25.1
From: Jeffrey Mitchell <[email protected]>
[ Upstream commit d33030e2ee3508d65db5644551435310df86010e ]
nfs_readdir_page_filler() iterates over entries in a directory, reusing
the same security label buffer, but does not reset the buffer's length.
This causes decode_attr_security_label() to return -ERANGE if an entry's
security label is longer than the previous one's. This error, in
nfs4_decode_dirent(), only gets passed up as -EAGAIN, which causes another
failed attempt to copy into the buffer. The second error is ignored and
the remaining entries do not show up in ls, specifically the getdents64()
syscall.
Reproduce by creating multiple files in NFS and giving one of the later
files a longer security label. ls will not see that file nor any that are
added afterwards, though they will exist on the backend.
In nfs_readdir_page_filler(), reset security label buffer length before
every reuse
Signed-off-by: Jeffrey Mitchell <[email protected]>
Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/dir.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 4ae726e70d873..733fd9e4f0a15 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -553,6 +553,9 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en
xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE);
do {
+ if (entry->label)
+ entry->label->len = NFS4_MAXLABELLEN;
+
status = xdr_decode(desc, entry, &stream);
if (status != 0) {
if (status == -EAGAIN)
--
2.25.1
From: Dinh Nguyen <[email protected]>
commit b02cf0c4736c65c6667f396efaae6b5521e82abf upstream.
The fixed divider the emac_ptp_free_clk should be 2, not 4.
Fixes: 07afb8db7340 ("clk: socfpga: stratix10: add clock driver for
Stratix10 platform")
Cc: [email protected]
Signed-off-by: Dinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/clk/socfpga/clk-s10.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/clk/socfpga/clk-s10.c
+++ b/drivers/clk/socfpga/clk-s10.c
@@ -107,7 +107,7 @@ static const struct stratix10_perip_cnt_
{ STRATIX10_EMAC_B_FREE_CLK, "emacb_free_clk", NULL, emacb_free_mux, ARRAY_SIZE(emacb_free_mux),
0, 0, 2, 0xB0, 1},
{ STRATIX10_EMAC_PTP_FREE_CLK, "emac_ptp_free_clk", NULL, emac_ptp_free_mux,
- ARRAY_SIZE(emac_ptp_free_mux), 0, 0, 4, 0xB0, 2},
+ ARRAY_SIZE(emac_ptp_free_mux), 0, 0, 2, 0xB0, 2},
{ STRATIX10_GPIO_DB_FREE_CLK, "gpio_db_free_clk", NULL, gpio_db_free_mux,
ARRAY_SIZE(gpio_db_free_mux), 0, 0, 0, 0xB0, 3},
{ STRATIX10_SDMMC_FREE_CLK, "sdmmc_free_clk", NULL, sdmmc_free_mux,
From: Stefano Garzarella <[email protected]>
[ Upstream commit 17dd1367389cfe7f150790c83247b68e0c19d106 ]
Before to call vdev->config->reset(vdev) we need to be sure that
no one is accessing the device, for this reason, we add new variables
in the struct virtio_vsock to stop the workers during the .remove().
This patch also add few comments before vdev->config->reset(vdev)
and vdev->config->del_vqs(vdev).
Suggested-by: Stefan Hajnoczi <[email protected]>
Suggested-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/vmw_vsock/virtio_transport.c | 51 +++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 68186419c445f..4bc217ef56945 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -39,6 +39,7 @@ struct virtio_vsock {
* must be accessed with tx_lock held.
*/
struct mutex tx_lock;
+ bool tx_run;
struct work_struct send_pkt_work;
spinlock_t send_pkt_list_lock;
@@ -54,6 +55,7 @@ struct virtio_vsock {
* must be accessed with rx_lock held.
*/
struct mutex rx_lock;
+ bool rx_run;
int rx_buf_nr;
int rx_buf_max_nr;
@@ -61,6 +63,7 @@ struct virtio_vsock {
* vqs[VSOCK_VQ_EVENT] must be accessed with event_lock held.
*/
struct mutex event_lock;
+ bool event_run;
struct virtio_vsock_event event_list[8];
u32 guest_cid;
@@ -95,6 +98,10 @@ static void virtio_transport_loopback_work(struct work_struct *work)
spin_unlock_bh(&vsock->loopback_list_lock);
mutex_lock(&vsock->rx_lock);
+
+ if (!vsock->rx_run)
+ goto out;
+
while (!list_empty(&pkts)) {
struct virtio_vsock_pkt *pkt;
@@ -103,6 +110,7 @@ static void virtio_transport_loopback_work(struct work_struct *work)
virtio_transport_recv_pkt(pkt);
}
+out:
mutex_unlock(&vsock->rx_lock);
}
@@ -131,6 +139,9 @@ virtio_transport_send_pkt_work(struct work_struct *work)
mutex_lock(&vsock->tx_lock);
+ if (!vsock->tx_run)
+ goto out;
+
vq = vsock->vqs[VSOCK_VQ_TX];
for (;;) {
@@ -189,6 +200,7 @@ virtio_transport_send_pkt_work(struct work_struct *work)
if (added)
virtqueue_kick(vq);
+out:
mutex_unlock(&vsock->tx_lock);
if (restart_rx)
@@ -324,6 +336,10 @@ static void virtio_transport_tx_work(struct work_struct *work)
vq = vsock->vqs[VSOCK_VQ_TX];
mutex_lock(&vsock->tx_lock);
+
+ if (!vsock->tx_run)
+ goto out;
+
do {
struct virtio_vsock_pkt *pkt;
unsigned int len;
@@ -334,6 +350,8 @@ static void virtio_transport_tx_work(struct work_struct *work)
added = true;
}
} while (!virtqueue_enable_cb(vq));
+
+out:
mutex_unlock(&vsock->tx_lock);
if (added)
@@ -362,6 +380,9 @@ static void virtio_transport_rx_work(struct work_struct *work)
mutex_lock(&vsock->rx_lock);
+ if (!vsock->rx_run)
+ goto out;
+
do {
virtqueue_disable_cb(vq);
for (;;) {
@@ -471,6 +492,9 @@ static void virtio_transport_event_work(struct work_struct *work)
mutex_lock(&vsock->event_lock);
+ if (!vsock->event_run)
+ goto out;
+
do {
struct virtio_vsock_event *event;
unsigned int len;
@@ -485,7 +509,7 @@ static void virtio_transport_event_work(struct work_struct *work)
} while (!virtqueue_enable_cb(vq));
virtqueue_kick(vsock->vqs[VSOCK_VQ_EVENT]);
-
+out:
mutex_unlock(&vsock->event_lock);
}
@@ -621,12 +645,18 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
INIT_WORK(&vsock->loopback_work, virtio_transport_loopback_work);
+ mutex_lock(&vsock->tx_lock);
+ vsock->tx_run = true;
+ mutex_unlock(&vsock->tx_lock);
+
mutex_lock(&vsock->rx_lock);
virtio_vsock_rx_fill(vsock);
+ vsock->rx_run = true;
mutex_unlock(&vsock->rx_lock);
mutex_lock(&vsock->event_lock);
virtio_vsock_event_fill(vsock);
+ vsock->event_run = true;
mutex_unlock(&vsock->event_lock);
vdev->priv = vsock;
@@ -661,6 +691,24 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
/* Reset all connected sockets when the device disappear */
vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+ /* Stop all work handlers to make sure no one is accessing the device,
+ * so we can safely call vdev->config->reset().
+ */
+ mutex_lock(&vsock->rx_lock);
+ vsock->rx_run = false;
+ mutex_unlock(&vsock->rx_lock);
+
+ mutex_lock(&vsock->tx_lock);
+ vsock->tx_run = false;
+ mutex_unlock(&vsock->tx_lock);
+
+ mutex_lock(&vsock->event_lock);
+ vsock->event_run = false;
+ mutex_unlock(&vsock->event_lock);
+
+ /* Flush all device writes and interrupts, device will not use any
+ * more buffers.
+ */
vdev->config->reset(vdev);
mutex_lock(&vsock->rx_lock);
@@ -691,6 +739,7 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
}
spin_unlock_bh(&vsock->loopback_list_lock);
+ /* Delete virtqueues and flush outstanding callbacks if any */
vdev->config->del_vqs(vdev);
mutex_unlock(&the_virtio_vsock_mutex);
--
2.25.1
From: Olympia Giannou <[email protected]>
[ Upstream commit 4202c9fdf03d79dedaa94b2c4cf574f25793d669 ]
Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.
The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/rndis_host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index b807c91abe1da..a22ae3137a3f8 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -213,7 +213,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf, int buflen)
dev_dbg(&info->control->dev,
"rndis response error, code %d\n", retval);
}
- msleep(20);
+ msleep(40);
}
dev_dbg(&info->control->dev, "rndis response timeout\n");
return -ETIMEDOUT;
--
2.25.1
From: Taiping Lai <[email protected]>
[ Upstream commit 5fcface659aab7eac4bd65dd116d98b8f7bb88d5 ]
The raw interrupt status of GPIO maybe set before the interrupt is enabled,
which would trigger the interrupt event once enabled it from user side.
This is the case for edge interrupts only. Adding a clear operation when
setting interrupt type can avoid that.
There're a few considerations for the solution:
1) This issue is for edge interrupt only; The interrupts requested by users
are IRQ_TYPE_LEVEL_HIGH as default, so clearing interrupt when request
is useless.
2) The interrupt type can be set to edge when request and following up
with clearing it though, but the problem is still there once users set
the interrupt type to level trggier.
3) We can add a clear operation after each time of setting interrupt
enable bit, but it is redundant for level trigger interrupt.
Therefore, the solution is this patch seems the best for now.
Fixes: 9a3821c2bb47 ("gpio: Add GPIO driver for Spreadtrum SC9860 platform")
Signed-off-by: Taiping Lai <[email protected]>
Signed-off-by: Chunyan Zhang <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-sprd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpio/gpio-sprd.c b/drivers/gpio/gpio-sprd.c
index 55072d2b367fa..4d53347adcafa 100644
--- a/drivers/gpio/gpio-sprd.c
+++ b/drivers/gpio/gpio-sprd.c
@@ -149,17 +149,20 @@ static int sprd_gpio_irq_set_type(struct irq_data *data,
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 1);
+ sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_FALLING:
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IEV, 0);
+ sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_EDGE_BOTH:
sprd_gpio_update(chip, offset, SPRD_GPIO_IS, 0);
sprd_gpio_update(chip, offset, SPRD_GPIO_IBE, 1);
+ sprd_gpio_update(chip, offset, SPRD_GPIO_IC, 1);
irq_set_handler_locked(data, handle_edge_irq);
break;
case IRQ_TYPE_LEVEL_HIGH:
--
2.25.1
From: Chris Packham <[email protected]>
[ Upstream commit 63c3212e7a37d68c89a13bdaebce869f4e064e67 ]
Per the datasheet the i2c functions use MPP_Sel=0x1. They are documented
as using MPP_Sel=0x4 as well but mixing 0x1 and 0x4 is clearly wrong. On
the board tested 0x4 resulted in a non-functioning i2c bus so stick with
0x1 which works.
Fixes: d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC")
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/mvebu/pinctrl-armada-xp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
index 43231fd065a18..1a9450ef932b5 100644
--- a/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
+++ b/drivers/pinctrl/mvebu/pinctrl-armada-xp.c
@@ -418,7 +418,7 @@ static struct mvebu_mpp_mode mv98dx3236_mpp_modes[] = {
MPP_VAR_FUNCTION(0x1, "i2c0", "sck", V_98DX3236_PLUS)),
MPP_MODE(15,
MPP_VAR_FUNCTION(0x0, "gpio", NULL, V_98DX3236_PLUS),
- MPP_VAR_FUNCTION(0x4, "i2c0", "sda", V_98DX3236_PLUS)),
+ MPP_VAR_FUNCTION(0x1, "i2c0", "sda", V_98DX3236_PLUS)),
MPP_MODE(16,
MPP_VAR_FUNCTION(0x0, "gpo", NULL, V_98DX3236_PLUS),
MPP_VAR_FUNCTION(0x4, "dev", "oe", V_98DX3236_PLUS)),
--
2.25.1
From: Marek Szyprowski <[email protected]>
[ Upstream commit f3bb0f796f5ffe32f0fbdce5b1b12eb85511158f ]
The ChipID IO region has it's own clock, which is being disabled while
scanning for unused clocks. It turned out that some CPU hotplug, CPU idle
or even SOC firmware code depends on the reads from that area. Fix the
mysterious hang caused by entering deep CPU idle state by ignoring the
'chipid' clock during unused clocks scan, as there are no direct clients
for it which will keep it enabled.
Fixes: e062b571777f ("clk: exynos4: register clocks using common clock framework")
Signed-off-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Sylwester Nawrocki <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/samsung/clk-exynos4.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
index 442309b569203..8086756e7f076 100644
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -1072,7 +1072,7 @@ static const struct samsung_gate_clock exynos4210_gate_clks[] __initconst = {
GATE(CLK_PCIE, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0),
GATE(CLK_SMMU_PCIE, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0),
GATE(CLK_MODEMIF, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0),
- GATE(CLK_CHIPID, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(CLK_CHIPID, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SYSREG, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0,
CLK_IGNORE_UNUSED, 0),
GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0,
@@ -1113,7 +1113,7 @@ static const struct samsung_gate_clock exynos4x12_gate_clks[] __initconst = {
0),
GATE(CLK_TSADC, "tsadc", "aclk133", E4X12_GATE_BUS_FSYS1, 16, 0, 0),
GATE(CLK_MIPI_HSI, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
- GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
+ GATE(CLK_CHIPID, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SYSREG, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1,
CLK_IGNORE_UNUSED, 0),
GATE(CLK_HDMI_CEC, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0,
--
2.25.1
From: James Smart <[email protected]>
[ Upstream commit 9e0e8dac985d4bd07d9e62922b9d189d3ca2fccf ]
The lldd may have made calls to delete a remote port or local port and
the delete is in progress when the cli then attempts to create a new
controller. Currently, this proceeds without error although it can't be
very successful.
Fix this by validating that both the host port and remote port are
present when a new controller is to be created.
Signed-off-by: James Smart <[email protected]>
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/fc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 73db32f97abf3..ed88d50217724 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -3294,12 +3294,14 @@ nvme_fc_create_ctrl(struct device *dev, struct nvmf_ctrl_options *opts)
spin_lock_irqsave(&nvme_fc_lock, flags);
list_for_each_entry(lport, &nvme_fc_lport_list, port_list) {
if (lport->localport.node_name != laddr.nn ||
- lport->localport.port_name != laddr.pn)
+ lport->localport.port_name != laddr.pn ||
+ lport->localport.port_state != FC_OBJSTATE_ONLINE)
continue;
list_for_each_entry(rport, &lport->endp_list, endp_list) {
if (rport->remoteport.node_name != raddr.nn ||
- rport->remoteport.port_name != raddr.pn)
+ rport->remoteport.port_name != raddr.pn ||
+ rport->remoteport.port_state != FC_OBJSTATE_ONLINE)
continue;
/* if fail to get reference fall through. Will error */
--
2.25.1
From: Vincent Huang <[email protected]>
[ Upstream commit 996d585b079ad494a30cac10e08585bcd5345125 ]
Add Synaptics IDs in trackpoint_start_protocol() to mark them as valid.
Signed-off-by: Vincent Huang <[email protected]>
Fixes: 6c77545af100 ("Input: trackpoint - add new trackpoint variant IDs")
Reviewed-by: Harry Cutts <[email protected]>
Tested-by: Harry Cutts <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/mouse/trackpoint.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/input/mouse/trackpoint.c b/drivers/input/mouse/trackpoint.c
index 31c16b68aa311..e468657854094 100644
--- a/drivers/input/mouse/trackpoint.c
+++ b/drivers/input/mouse/trackpoint.c
@@ -285,6 +285,8 @@ static int trackpoint_start_protocol(struct psmouse *psmouse,
case TP_VARIANT_ALPS:
case TP_VARIANT_ELAN:
case TP_VARIANT_NXP:
+ case TP_VARIANT_JYT_SYNAPTICS:
+ case TP_VARIANT_SYNAPTICS:
if (variant_id)
*variant_id = param[0];
if (firmware_id)
--
2.25.1
From: Lucy Yan <[email protected]>
[ Upstream commit ee460417d254d941dfea5fb7cff841f589643992 ]
Increase Rx ring size to address issue where hardware is reaching
the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/dec/tulip/de2104x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/dec/tulip/de2104x.c b/drivers/net/ethernet/dec/tulip/de2104x.c
index 13430f75496cc..b312cd9bce169 100644
--- a/drivers/net/ethernet/dec/tulip/de2104x.c
+++ b/drivers/net/ethernet/dec/tulip/de2104x.c
@@ -91,7 +91,7 @@ MODULE_PARM_DESC (rx_copybreak, "de2104x Breakpoint at which Rx packets are copi
#define DSL CONFIG_DE2104X_DSL
#endif
-#define DE_RX_RING_SIZE 64
+#define DE_RX_RING_SIZE 128
#define DE_TX_RING_SIZE 64
#define DE_RING_BYTES \
((sizeof(struct de_desc) * DE_RX_RING_SIZE) + \
--
2.25.1
From: Al Viro <[email protected]>
commit 3701cb59d892b88d569427586f01491552f377b1 upstream.
or get freed, for that matter, if it's a long (separately stored)
name.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/eventpoll.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1376,7 +1376,7 @@ static int reverse_path_check(void)
static int ep_create_wakeup_source(struct epitem *epi)
{
- const char *name;
+ struct name_snapshot n;
struct wakeup_source *ws;
if (!epi->ep->ws) {
@@ -1385,8 +1385,9 @@ static int ep_create_wakeup_source(struc
return -ENOMEM;
}
- name = epi->ffd.file->f_path.dentry->d_name.name;
- ws = wakeup_source_register(name);
+ take_dentry_name_snapshot(&n, epi->ffd.file->f_path.dentry);
+ ws = wakeup_source_register(n.name);
+ release_dentry_name_snapshot(&n);
if (!ws)
return -ENOMEM;
From: Al Viro <[email protected]>
commit fe0a916c1eae8e17e86c3753d13919177d63ed7e upstream.
Checking for the lack of epitems refering to the epoll we want to insert into
is not enough; we might have an insertion of that epoll into another one that
has already collected the set of files to recheck for excessive reverse paths,
but hasn't gotten to creating/inserting the epitem for it.
However, any such insertion in progress can be detected - it will update the
generation count in our epoll when it's done looking through it for files
to check. That gets done under ->mtx of our epoll and that allows us to
detect that safely.
We are *not* holding epmutex here, so the generation count is not stable.
However, since both the update of ep->gen by loop check and (later)
insertion into ->f_ep_link are done with ep->mtx held, we are fine -
the sequence is
grab epmutex
bump loop_check_gen
...
grab tep->mtx // 1
tep->gen = loop_check_gen
...
drop tep->mtx // 2
...
grab tep->mtx // 3
...
insert into ->f_ep_link
...
drop tep->mtx // 4
bump loop_check_gen
drop epmutex
and if the fastpath check in another thread happens for that
eventpoll, it can come
* before (1) - in that case fastpath is just fine
* after (4) - we'll see non-empty ->f_ep_link, slow path
taken
* between (2) and (3) - loop_check_gen is stable,
with ->mtx providing barriers and we end up taking slow path.
Note that ->f_ep_link emptiness check is slightly racy - we are protected
against insertions into that list, but removals can happen right under us.
Not a problem - in the worst case we'll end up taking a slow path for
no good reason.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/eventpoll.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -2074,6 +2074,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
mutex_lock_nested(&ep->mtx, 0);
if (op == EPOLL_CTL_ADD) {
if (!list_empty(&f.file->f_ep_links) ||
+ ep->gen == loop_check_gen ||
is_file_epoll(tf.file)) {
full_check = 1;
mutex_unlock(&ep->mtx);
From: Al Viro <[email protected]>
commit 18306c404abe18a0972587a6266830583c60c928 upstream.
removes the need to clear it, along with the races.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/eventpoll.c | 26 +++++++-------------------
1 file changed, 7 insertions(+), 19 deletions(-)
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -222,8 +222,7 @@ struct eventpoll {
struct file *file;
/* used to optimize loop detection check */
- int visited;
- struct list_head visited_list_link;
+ u64 gen;
#ifdef CONFIG_NET_RX_BUSY_POLL
/* used to track busy poll napi_id */
@@ -273,6 +272,8 @@ static long max_user_watches __read_most
*/
static DEFINE_MUTEX(epmutex);
+static u64 loop_check_gen = 0;
+
/* Used to check for epoll file descriptor inclusion loops */
static struct nested_calls poll_loop_ncalls;
@@ -282,9 +283,6 @@ static struct kmem_cache *epi_cache __re
/* Slab cache used to allocate "struct eppoll_entry" */
static struct kmem_cache *pwq_cache __read_mostly;
-/* Visited nodes during ep_loop_check(), so we can unset them when we finish */
-static LIST_HEAD(visited_list);
-
/*
* List of files with newly added links, where we may need to limit the number
* of emanating paths. Protected by the epmutex.
@@ -1867,13 +1865,12 @@ static int ep_loop_check_proc(void *priv
struct epitem *epi;
mutex_lock_nested(&ep->mtx, call_nests + 1);
- ep->visited = 1;
- list_add(&ep->visited_list_link, &visited_list);
+ ep->gen = loop_check_gen;
for (rbp = rb_first_cached(&ep->rbr); rbp; rbp = rb_next(rbp)) {
epi = rb_entry(rbp, struct epitem, rbn);
if (unlikely(is_file_epoll(epi->ffd.file))) {
ep_tovisit = epi->ffd.file->private_data;
- if (ep_tovisit->visited)
+ if (ep_tovisit->gen == loop_check_gen)
continue;
error = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS,
ep_loop_check_proc, epi->ffd.file,
@@ -1914,18 +1911,8 @@ static int ep_loop_check_proc(void *priv
*/
static int ep_loop_check(struct eventpoll *ep, struct file *file)
{
- int ret;
- struct eventpoll *ep_cur, *ep_next;
-
- ret = ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS,
+ return ep_call_nested(&poll_loop_ncalls, EP_MAX_NESTS,
ep_loop_check_proc, file, ep, current);
- /* clear visited list */
- list_for_each_entry_safe(ep_cur, ep_next, &visited_list,
- visited_list_link) {
- ep_cur->visited = 0;
- list_del(&ep_cur->visited_list_link);
- }
- return ret;
}
static void clear_tfile_check_list(void)
@@ -2147,6 +2134,7 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, in
error_tgt_fput:
if (full_check) {
clear_tfile_check_list();
+ loop_check_gen++;
mutex_unlock(&epmutex);
}
From: Will McVicker <[email protected]>
commit 1cc5ef91d2ff94d2bf2de3b3585423e8a1051cb6 upstream.
The indexes to the nf_nat_l[34]protos arrays come from userspace. So
check the tuple's family, e.g. l3num, when creating the conntrack in
order to prevent an OOB memory access during setup. Here is an example
kernel panic on 4.14.180 when userspace passes in an index greater than
NFPROTO_NUMPROTO.
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:...
Process poc (pid: 5614, stack limit = 0x00000000a3933121)
CPU: 4 PID: 5614 Comm: poc Tainted: G S W O 4.14.180-g051355490483
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150 Google Inc. MSM
task: 000000002a3dfffe task.stack: 00000000a3933121
pc : __cfi_check_fail+0x1c/0x24
lr : __cfi_check_fail+0x1c/0x24
...
Call trace:
__cfi_check_fail+0x1c/0x24
name_to_dev_t+0x0/0x468
nfnetlink_parse_nat_setup+0x234/0x258
ctnetlink_parse_nat_setup+0x4c/0x228
ctnetlink_new_conntrack+0x590/0xc40
nfnetlink_rcv_msg+0x31c/0x4d4
netlink_rcv_skb+0x100/0x184
nfnetlink_rcv+0xf4/0x180
netlink_unicast+0x360/0x770
netlink_sendmsg+0x5a0/0x6a4
___sys_sendmsg+0x314/0x46c
SyS_sendmsg+0xb4/0x108
el0_svc_naked+0x34/0x38
This crash is not happening since 5.4+, however, ctnetlink still
allows for creating entries with unsupported layer 3 protocol number.
Fixes: c1d10adb4a521 ("[NETFILTER]: Add ctnetlink port for nf_conntrack")
Signed-off-by: Will McVicker <[email protected]>
[[email protected]: rebased original patch on top of nf.git]
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_netlink.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1129,6 +1129,8 @@ ctnetlink_parse_tuple(const struct nlatt
if (!tb[CTA_TUPLE_IP])
return -EINVAL;
+ if (l3num != NFPROTO_IPV4 && l3num != NFPROTO_IPV6)
+ return -EOPNOTSUPP;
tuple->src.l3num = l3num;
err = ctnetlink_parse_tuple_ip(tb[CTA_TUPLE_IP], tuple);
From: Steven Rostedt (VMware) <[email protected]>
commit b40341fad6cc2daa195f8090fd3348f18fff640a upstream.
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Paul McKenney <[email protected]>
Fixes: c68c0fa293417 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Reported-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/ftrace.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -6370,16 +6370,14 @@ static void ftrace_ops_assist_func(unsig
{
int bit;
- if ((op->flags & FTRACE_OPS_FL_RCU) && !rcu_is_watching())
- return;
-
bit = trace_test_and_set_recursion(TRACE_LIST_START, TRACE_LIST_MAX);
if (bit < 0)
return;
preempt_disable_notrace();
- op->func(ip, parent_ip, op, regs);
+ if (!(op->flags & FTRACE_OPS_FL_RCU) || rcu_is_watching())
+ op->func(ip, parent_ip, op, regs);
preempt_enable_notrace();
trace_clear_recursion(bit);
From: Chris Packham <[email protected]>
[ Upstream commit b867eef4cf548cd9541225aadcdcee644669b9e1 ]
The SPIE register contains counts for the TX FIFO so any time the irq
handler was invoked we would attempt to process the RX/TX fifos. Use the
SPIM value to mask the events so that we only process interrupts that
were expected.
This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
Implement soft interrupt replay in C").
Signed-off-by: Chris Packham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-fsl-espi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 1e8ff6256079f..b8dd75b8518b5 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -559,13 +559,14 @@ static void fsl_espi_cpu_irq(struct fsl_espi *espi, u32 events)
static irqreturn_t fsl_espi_irq(s32 irq, void *context_data)
{
struct fsl_espi *espi = context_data;
- u32 events;
+ u32 events, mask;
spin_lock(&espi->lock);
/* Get interrupt events(tx/rx) */
events = fsl_espi_read_reg(espi, ESPI_SPIE);
- if (!events) {
+ mask = fsl_espi_read_reg(espi, ESPI_SPIM);
+ if (!(events & mask)) {
spin_unlock(&espi->lock);
return IRQ_NONE;
}
--
2.25.1
From: Jiri Kosina <[email protected]>
commit 5fc27b098dafb8e30794a9db0705074c7d766179 upstream.
Touchpad on this laptop is not detected properly during boot, as PNP
enumerates (wrongly) AUX port as disabled on this machine.
Fix that by adding this board (with admittedly quite funny DMI
identifiers) to nopnp quirk list.
Reported-by: Andrés Barrantes Silman <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/serio/i8042-x86ia64io.h | 7 +++++++
1 file changed, 7 insertions(+)
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -725,6 +725,13 @@ static const struct dmi_system_id __init
DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
},
},
+ {
+ /* Acer Aspire 5 A515 */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "Grumpy_PK"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "PK"),
+ },
+ },
{ }
};
From: Hans de Goede <[email protected]>
commit afd7f30886b0b445a4240a99020458a9772f2b89 upstream.
Commit bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on
Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models
because of it being broken due to what is believed to be a bug in
the BIOS.
It seems that the BIOS of some IRBIS models, including the IRBIS NB111
model has the same issue, so disable command queuing there too.
Fixes: bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397
Reported-and-tested-by: RussianNeuroMancer <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Ulf Hansson <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/mmc/host/sdhci-pci-core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -739,7 +739,8 @@ static int byt_emmc_probe_slot(struct sd
static bool glk_broken_cqhci(struct sdhci_pci_slot *slot)
{
return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC &&
- dmi_match(DMI_BIOS_VENDOR, "LENOVO");
+ (dmi_match(DMI_BIOS_VENDOR, "LENOVO") ||
+ dmi_match(DMI_SYS_VENDOR, "IRBIS"));
}
static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
From: Or Cohen <[email protected]>
commit acf69c946233259ab4d64f8869d4037a198c7f06 upstream.
Using tp_reserve to calculate netoff can overflow as
tp_reserve is unsigned int and netoff is unsigned short.
This may lead to macoff receving a smaller value then
sizeof(struct virtio_net_hdr), and if po->has_vnet_hdr
is set, an out-of-bounds write will occur when
calling virtio_net_hdr_from_skb.
The bug is fixed by converting netoff to unsigned int
and checking if it exceeds USHRT_MAX.
This addresses CVE-2020-14386
Fixes: 8913336a7e8d ("packet: add PACKET_RESERVE sockopt")
Signed-off-by: Or Cohen <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
[ snu: backported to pre-5.3, changed tp_drops counting/locking ]
Signed-off-by: Stefan Nuernberger <[email protected]>
CC: David Woodhouse <[email protected]>
CC: Amit Shah <[email protected]>
CC: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/packet/af_packet.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2162,7 +2162,8 @@ static int tpacket_rcv(struct sk_buff *s
int skb_len = skb->len;
unsigned int snaplen, res;
unsigned long status = TP_STATUS_USER;
- unsigned short macoff, netoff, hdrlen;
+ unsigned short macoff, hdrlen;
+ unsigned int netoff;
struct sk_buff *copy_skb = NULL;
struct timespec ts;
__u32 ts_status;
@@ -2225,6 +2226,12 @@ static int tpacket_rcv(struct sk_buff *s
}
macoff = netoff - maclen;
}
+ if (netoff > USHRT_MAX) {
+ spin_lock(&sk->sk_receive_queue.lock);
+ po->stats.stats1.tp_drops++;
+ spin_unlock(&sk->sk_receive_queue.lock);
+ goto drop_n_restore;
+ }
if (po->tp_version <= TPACKET_V2) {
if (macoff + snaplen > po->rx_ring.frame_size) {
if (po->copy_thresh &&
From: Al Viro <[email protected]>
commit f8d4f44df056c5b504b0d49683fb7279218fd207 upstream.
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/eventpoll.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1450,6 +1450,22 @@ static int ep_insert(struct eventpoll *e
RCU_INIT_POINTER(epi->ws, NULL);
}
+ /* Add the current item to the list of active epoll hook for this file */
+ spin_lock(&tfile->f_lock);
+ list_add_tail_rcu(&epi->fllink, &tfile->f_ep_links);
+ spin_unlock(&tfile->f_lock);
+
+ /*
+ * Add the current item to the RB tree. All RB tree operations are
+ * protected by "mtx", and ep_insert() is called with "mtx" held.
+ */
+ ep_rbtree_insert(ep, epi);
+
+ /* now check if we've created too many backpaths */
+ error = -EINVAL;
+ if (full_check && reverse_path_check())
+ goto error_remove_epi;
+
/* Initialize the poll table using the queue callback */
epq.epi = epi;
init_poll_funcptr(&epq.pt, ep_ptable_queue_proc);
@@ -1472,22 +1488,6 @@ static int ep_insert(struct eventpoll *e
if (epi->nwait < 0)
goto error_unregister;
- /* Add the current item to the list of active epoll hook for this file */
- spin_lock(&tfile->f_lock);
- list_add_tail_rcu(&epi->fllink, &tfile->f_ep_links);
- spin_unlock(&tfile->f_lock);
-
- /*
- * Add the current item to the RB tree. All RB tree operations are
- * protected by "mtx", and ep_insert() is called with "mtx" held.
- */
- ep_rbtree_insert(ep, epi);
-
- /* now check if we've created too many backpaths */
- error = -EINVAL;
- if (full_check && reverse_path_check())
- goto error_remove_epi;
-
/* We have to drop the new item inside our item list to keep track of it */
spin_lock_irq(&ep->wq.lock);
@@ -1516,6 +1516,8 @@ static int ep_insert(struct eventpoll *e
return 0;
+error_unregister:
+ ep_unregister_pollwait(ep, epi);
error_remove_epi:
spin_lock(&tfile->f_lock);
list_del_rcu(&epi->fllink);
@@ -1523,9 +1525,6 @@ error_remove_epi:
rb_erase_cached(&epi->rbn, &ep->rbr);
-error_unregister:
- ep_unregister_pollwait(ep, epi);
-
/*
* We need to do this because an event could have been arrived on some
* allocated wait queue. Note that we don't care about the ep->ovflist
From: Xie He <[email protected]>
[ Upstream commit 44a049c42681de71c783d75cd6e56b4e339488b0 ]
PVC devices are virtual devices in this driver stacked on top of the
actual HDLC device. They are the devices normal users would use.
PVC devices have two types: normal PVC devices and Ethernet-emulating
PVC devices.
When transmitting data with PVC devices, the ndo_start_xmit function
will prepend a header of 4 or 10 bytes. Currently this driver requests
this headroom to be reserved for normal PVC devices by setting their
hard_header_len to 10. However, this does not work when these devices
are used with AF_PACKET/RAW sockets. Also, this driver does not request
this headroom for Ethernet-emulating PVC devices (but deals with this
problem by reallocating the skb when needed, which is not optimal).
This patch replaces hard_header_len with needed_headroom, and set
needed_headroom for Ethernet-emulating PVC devices, too. This makes
the driver to request headroom for all PVC devices in all cases.
Cc: Krzysztof Halasa <[email protected]>
Cc: Martin Schiller <[email protected]>
Signed-off-by: Xie He <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/hdlc_fr.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index 038236a9c60ee..67f89917277ce 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -1044,7 +1044,7 @@ static void pvc_setup(struct net_device *dev)
{
dev->type = ARPHRD_DLCI;
dev->flags = IFF_POINTOPOINT;
- dev->hard_header_len = 10;
+ dev->hard_header_len = 0;
dev->addr_len = 2;
netif_keep_dst(dev);
}
@@ -1096,6 +1096,7 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
dev->mtu = HDLC_MAX_MTU;
dev->min_mtu = 68;
dev->max_mtu = HDLC_MAX_MTU;
+ dev->needed_headroom = 10;
dev->priv_flags |= IFF_NO_QUEUE;
dev->ml_priv = pvc;
--
2.25.1
From: Jean Delvare <[email protected]>
commit a39d0d7bdf8c21ac7645c02e9676b5cb2b804c31 upstream.
A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.
Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.
Signed-off-by: Jean Delvare <[email protected]>
Fixes: e008fa6fb415 ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: [email protected]
Cc: Navid Emamdoost <[email protected]>
Cc: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -290,7 +290,7 @@ int amdgpu_display_crtc_set_config(struc
take the current one */
if (active && !adev->have_disp_power_ref) {
adev->have_disp_power_ref = true;
- goto out;
+ return ret;
}
/* if we have no active crtcs, then drop the power ref
we got before */
Hi!
> diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
> index 33dad9774da01..9ea3d8e611005 100644
> --- a/drivers/nvme/host/core.c
> +++ b/drivers/nvme/host/core.c
> @@ -2605,10 +2605,24 @@ static int nvme_dev_open(struct inode *inode, struct file *file)
> return -EWOULDBLOCK;
> }
>
> + nvme_get_ctrl(ctrl);
> + if (!try_module_get(ctrl->ops->module))
> + return -EINVAL;
This needs to do nvme_put_ctrl(ctrl); before returning, right?
Otherwise we leak the reference.
Plus, I'm not sure EINVAL is right error return. EBUSY?
Signed-off-by: Pavel Machek (CIP) <[email protected]>
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 9ea3d8e61100..01c36f3dd87f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2606,8 +2606,10 @@ static int nvme_dev_open(struct inode *inode, struct file *file)
}
nvme_get_ctrl(ctrl);
- if (!try_module_get(ctrl->ops->module))
- return -EINVAL;
+ if (!try_module_get(ctrl->ops->module)) {
+ nvme_put_ctrl(ctrl);
+ return -EBUSY;
+ }
file->private_data = ctrl;
return 0;
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Hi!
> From: Will McVicker <[email protected]>
>
> commit 1cc5ef91d2ff94d2bf2de3b3585423e8a1051cb6 upstream.
>
> The indexes to the nf_nat_l[34]protos arrays come from userspace. So
> check the tuple's family, e.g. l3num, when creating the conntrack in
> order to prevent an OOB memory access during setup. Here is an example
> kernel panic on 4.14.180 when userspace passes in an index greater than
> NFPROTO_NUMPROTO.
Since this protects against OOB array access, should it use _nospec()
variant to protect from speculation attacks?
Best regards,
Pavel
> +++ b/net/netfilter/nf_conntrack_netlink.c
> @@ -1129,6 +1129,8 @@ ctnetlink_parse_tuple(const struct nlatt
> if (!tb[CTA_TUPLE_IP])
> return -EINVAL;
>
> + if (l3num != NFPROTO_IPV4 && l3num != NFPROTO_IPV6)
> + return -EOPNOTSUPP;
> tuple->src.l3num = l3num;
>
> err = ctnetlink_parse_tuple_ip(tb[CTA_TUPLE_IP], tuple);
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 10/5/20 9:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.150 release.
> There are 38 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 07 Oct 2020 14:20:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.150-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Mon, 5 Oct 2020 at 20:57, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.150 release.
> There are 38 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 07 Oct 2020 14:20:55 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.150-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
NOTE:
While running LTP mm test suite on qemu_arm64 kernel panic noticed.
mem.c:147: PASS: victim signalled: (9) SIGKILL
mem.c:232: INFO: start OOM testing for KSM pages.
mem.c:140: INFO: expected victim is 22880.
mem.c:39: INFO: thread (ffff815e21f0), allocating 3221225472 bytes.
mem.c:39: INFO: thread (ffff80de11f0), allocating 3221225472 bytes.
mem.c:39: INFO: thread (ffff805e01f0), allocating 3221225472 bytes.
[ 466.027773] BUG: Bad page state in process oom01 pfn:76283
[ 466.030488] page:ffff7e0000d8a0c0 count:0 mapcount:0
mapping:0000000000000000 index:0x1
[ 466.034501] flags: 0xfffc00000000100(slab)
[ 466.036606] raw: 0fffc00000000100 dead000000000100 dead000000000200
0000000000000000
[ 466.040243] raw: 0000000000000001 0000000000000000 00000000ffffffff
0000000000000000
[ 466.043931] page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
[ 466.046974] bad because of flags: 0x100(slab)
[ 466.049078] Modules linked in: crc32_ce crct10dif_ce fuse
[ 466.051636] CPU: 3 PID: 22882 Comm: oom01 Not tainted 4.19.150-rc1 #1
[ 466.054711] Hardware name: linux,dummy-virt (DT)
[ 466.056906] Call trace:
[ 466.058159] dump_backtrace+0x0/0x190
[ 466.059980] show_stack+0x24/0x30
[ 466.061560] dump_stack+0xb8/0x100
[ 466.063272] bad_page+0x104/0x130
[ 466.064761] check_new_page_bad+0x80/0xb0
[ 466.066500] get_page_from_freelist+0xeb0/0x14e8
[ 466.068508] __alloc_pages_nodemask+0x12c/0xdf0
[ 466.070466] alloc_pages_vma+0x90/0x1f8
[ 466.072164] __handle_mm_fault+0x59c/0x10d0
[ 466.074014] handle_mm_fault+0x128/0x210
[ 466.076069] do_page_fault+0x150/0x4d8
[ 466.077861] do_translation_fault+0xa4/0xb8
[ 466.079890] do_mem_abort+0x68/0x110
[ 466.081479] el0_da+0x20/0x24
[ 466.083041] Disabling lock debugging due to kernel taint
Full test log link,
-------------------
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.149-39-g204463e611dc/testrun/3273175/suite/linux-log-parser/test/check-kernel-bug-1817703/log
Summary
------------------------------------------------------------------------
kernel: 4.19.150-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 204463e611dc07092b63dd18658ad7efc3dd1252
git describe: v4.19.149-39-g204463e611dc
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.19.y/build/v4.19.149-39-g204463e611dc
No regressions (compared to build v4.19.149)
No fixes (compared to build v4.19.149)
Ran 34073 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-hugetlb-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* perf
* v4l2-compliance
* ltp-controllers-tests
* ltp-dio-tests
* ltp-io-tests
* kselftest
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-open-posix-tests
* network-basic-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
Hi!
> [ Upstream commit b867eef4cf548cd9541225aadcdcee644669b9e1 ]
>
> The SPIE register contains counts for the TX FIFO so any time the irq
> handler was invoked we would attempt to process the RX/TX fifos. Use the
> SPIM value to mask the events so that we only process interrupts that
> were expected.
>
> This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
> Implement soft interrupt replay in C").
We don't seem to have commit 3282... in 4.19, so we don't need this
one in 4.19-stable according to the changelog.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 10/5/20 8:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.150 release.
> There are 38 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 07 Oct 2020 14:20:55 +0000.
> Anything received after that time might be too late.
Build results:
total: 155 pass: 153 fail: 2
Failed builds:
i386:tools/perf
x86_64:tools/perf
Qemu test results:
total: 421 pass: 421 fail: 0
Same problem with tools/perf as with the last release.
util/evsel.c: In function ‘perf_evsel__exit’:
util/util.h:25:28: error: passing argument 1 of ‘free’ discards ‘const’ qualifier from pointer target type
Again, this is with gcc 6.5.0.
Tested-by: Guenter Roeck <[email protected]>
Guenter
Hi!
> [ Upstream commit 17dd1367389cfe7f150790c83247b68e0c19d106 ]
>
> Before to call vdev->config->reset(vdev) we need to be sure that
> no one is accessing the device, for this reason, we add new variables
> in the struct virtio_vsock to stop the workers during the .remove().
>
> This patch also add few comments before vdev->config->reset(vdev)
> and vdev->config->del_vqs(vdev).
> @@ -621,12 +645,18 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
> INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
> INIT_WORK(&vsock->loopback_work, virtio_transport_loopback_work);
>
> + mutex_lock(&vsock->tx_lock);
> + vsock->tx_run = true;
> + mutex_unlock(&vsock->tx_lock);
> +
> mutex_lock(&vsock->rx_lock);
> virtio_vsock_rx_fill(vsock);
> + vsock->rx_run = true;
> mutex_unlock(&vsock->rx_lock);
>
> mutex_lock(&vsock->event_lock);
> virtio_vsock_event_fill(vsock);
> + vsock->event_run = true;
> mutex_unlock(&vsock->event_lock);
>
This looks like some kind of voodoo code. Locks are just being
allocated few lines above, so there are no other threads accessing
*vsock. That means we don't need to take the locks... right?
At least taking the tx_lock is unneccessary, but probably the others,
too...
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Tue, Oct 06, 2020 at 09:34:32PM +0200, Pavel Machek wrote:
> Hi!
>
> > [ Upstream commit 17dd1367389cfe7f150790c83247b68e0c19d106 ]
> >
> > Before to call vdev->config->reset(vdev) we need to be sure that
> > no one is accessing the device, for this reason, we add new variables
> > in the struct virtio_vsock to stop the workers during the .remove().
> >
> > This patch also add few comments before vdev->config->reset(vdev)
> > and vdev->config->del_vqs(vdev).
>
>
> > @@ -621,12 +645,18 @@ static int virtio_vsock_probe(struct virtio_device *vdev)
> > INIT_WORK(&vsock->send_pkt_work, virtio_transport_send_pkt_work);
> > INIT_WORK(&vsock->loopback_work, virtio_transport_loopback_work);
> >
> > + mutex_lock(&vsock->tx_lock);
> > + vsock->tx_run = true;
> > + mutex_unlock(&vsock->tx_lock);
> > +
> > mutex_lock(&vsock->rx_lock);
> > virtio_vsock_rx_fill(vsock);
> > + vsock->rx_run = true;
> > mutex_unlock(&vsock->rx_lock);
> >
> > mutex_lock(&vsock->event_lock);
> > virtio_vsock_event_fill(vsock);
> > + vsock->event_run = true;
> > mutex_unlock(&vsock->event_lock);
> >
>
> This looks like some kind of voodoo code. Locks are just being
> allocated few lines above, so there are no other threads accessing
> *vsock. That means we don't need to take the locks... right?
>
> At least taking the tx_lock is unneccessary, but probably the others,
> too...
Before commit 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free
on the_virtio_vsock") we assigned 'the_virtio_vsock pointer' before this
section, so this should be the reason of these locks.
Now that we moved the assignment at the end of the probe(), we can clean
a bit, especially the tx_lock.
I'll take a look.
Thanks,
Stefano
Hi!
> From: Yu Kuai <[email protected]>
>
> [ Upstream commit 1a26044954a6d1f4d375d5e62392446af663be7a ]
>
> if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
> a corresponding put_device(). Thus add put_device() to fix the exception
> handling for this function implementation.
Okay, this looks reasonable, but...
Do we miss put_device() in normal path, too? I'd expect another
put_device at end of exynos_iommu_of_xlate() or perhaps in release
path somewhere...
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On 7/10/20 8:36 am, Pavel Machek wrote:
> Hi!
>
>> [ Upstream commit b867eef4cf548cd9541225aadcdcee644669b9e1 ]
>>
>> The SPIE register contains counts for the TX FIFO so any time the irq
>> handler was invoked we would attempt to process the RX/TX fifos. Use the
>> SPIM value to mask the events so that we only process interrupts that
>> were expected.
>>
>> This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
>> Implement soft interrupt replay in C").
> We don't seem to have commit 3282... in 4.19, so we don't need this
> one in 4.19-stable according to the changelog.
Technically 3282... exposed the issue by making it more likely to happen
so 4.19 might just have a really low probability of seeing the issue (I
think I did try reproducing it on kernels of that vintage). Personally
I'm not too fussed the kernel versions I care about have the fix. Maybe
someone from NXP cares enough to pursue it.
Hi!
> >> [ Upstream commit b867eef4cf548cd9541225aadcdcee644669b9e1 ]
> >>
> >> The SPIE register contains counts for the TX FIFO so any time the irq
> >> handler was invoked we would attempt to process the RX/TX fifos. Use the
> >> SPIM value to mask the events so that we only process interrupts that
> >> were expected.
> >>
> >> This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64:
> >> Implement soft interrupt replay in C").
> > We don't seem to have commit 3282... in 4.19, so we don't need this
> > one in 4.19-stable according to the changelog.
> Technically 3282... exposed the issue by making it more likely to happen
> so 4.19 might just have a really low probability of seeing the issue (I
> think I did try reproducing it on kernels of that vintage). Personally
> I'm not too fussed the kernel versions I care about have the fix. Maybe
> someone from NXP cares enough to pursue it.
Okay, I guess low-probability bugs are still fair game for
-stable. The commit was not dropped from 4.19, so nothing needs to be
done here.
Sorry for the noise,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Hi Pavel,
On 07.10.2020 11:47, Pavel Machek wrote:
>> From: Yu Kuai <[email protected]>
>>
>> [ Upstream commit 1a26044954a6d1f4d375d5e62392446af663be7a ]
>>
>> if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
>> a corresponding put_device(). Thus add put_device() to fix the exception
>> handling for this function implementation.
> Okay, this looks reasonable, but...
>
> Do we miss put_device() in normal path, too? I'd expect another
> put_device at end of exynos_iommu_of_xlate() or perhaps in release
> path somewhere...
Frankly, there is no release path, so there is no need for put_device.
Once initialized, Exynos IOMMU stays in the system forever. There is no
point to remove IOMMU nor the API for that. Keeping increased refcount
for its device just matches this behavior.
If the missing put_device() is really a problem, then we can move it
from the error path just after data = platform_get_drvdata(sysmmu)
assignment. Feel free to send a patch if you think this is a more
appropriate approach.
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
Hi!
> >> From: Yu Kuai <[email protected]>
> >>
> >> [ Upstream commit 1a26044954a6d1f4d375d5e62392446af663be7a ]
> >>
> >> if of_find_device_by_node() succeed, exynos_iommu_of_xlate() doesn't have
> >> a corresponding put_device(). Thus add put_device() to fix the exception
> >> handling for this function implementation.
> > Okay, this looks reasonable, but...
> >
> > Do we miss put_device() in normal path, too? I'd expect another
> > put_device at end of exynos_iommu_of_xlate() or perhaps in release
> > path somewhere...
>
> Frankly, there is no release path, so there is no need for put_device.
> Once initialized, Exynos IOMMU stays in the system forever. There is no
> point to remove IOMMU nor the API for that. Keeping increased refcount
> for its device just matches this behavior.
>
> If the missing put_device() is really a problem, then we can move it
> from the error path just after data = platform_get_drvdata(sysmmu)
> assignment. Feel free to send a patch if you think this is a more
> appropriate approach.
exynos_iommu_detach_device() looks like a place where resources could
be freed? But if there's no release path, we don't really need to do anything.
Sorry about the noise.
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany