Add some simple helpers to setup a passthru target that passes through
to a nvme test device.
Signed-off-by: Logan Gunthorpe <[email protected]>
---
tests/nvme/rc | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index dfa57a299625..f0b6f360da8c 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -73,6 +73,16 @@ _require_nvme_trtype_is_fabrics() {
return 0
}
+_test_dev_nvme_ctrl() {
+ local dev=$(cat "${TEST_DEV_SYSFS}/device/dev")
+
+ echo "/dev/char/${dev}"
+}
+
+_test_dev_nvme_nsid() {
+ cat "${TEST_DEV_SYSFS}/nsid"
+}
+
_cleanup_nvmet() {
local dev
local port
@@ -257,6 +267,27 @@ _remove_nvmet_subsystem() {
rmdir "${subsys_path}"
}
+_create_nvmet_passthru() {
+ local nvmet_subsystem="$1"
+ local subsys_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
+ local passthru_path="${subsys_path}/passthru"
+
+ mkdir -p "${subsys_path}"
+ echo 1 > "${subsys_path}/attr_allow_any_host"
+
+ echo "$(_test_dev_nvme_ctrl)" > "${passthru_path}/device_path"
+ echo 1 > "${passthru_path}/enable"
+}
+
+_remove_nvmet_passhtru() {
+ local nvmet_subsystem="$1"
+ local subsys_path="${NVMET_CFS}/subsystems/${nvmet_subsystem}"
+ local passthru_path="${subsys_path}/passthru"
+
+ echo 0 > "${passthru_path}/enable"
+ rmdir "${subsys_path}"
+}
+
_add_nvmet_subsys_to_port() {
local port="$1"
local nvmet_subsystem="$2"
@@ -292,6 +323,50 @@ _find_nvme_dev() {
done
}
+_find_nvme_passthru_loop_dev() {
+ local subsys=$1
+ local nsid
+ local dev
+
+ dev=$(_find_nvme_dev "${subsys}")
+ nsid=$(_test_dev_nvme_nsid)
+ echo "/dev/${dev}n${nsid}"
+}
+
+_nvmet_passthru_target_setup() {
+ local subsys_name=$1
+
+ _create_nvmet_passthru "${subsys_name}"
+ port="$(_create_nvmet_port "loop")"
+ _add_nvmet_subsys_to_port "${port}" "${subsys_name}"
+
+ echo "$port"
+}
+
+_nvmet_passthru_target_connect() {
+ local trtype=$1
+ local subsys_name=$2
+
+ _nvme_connect_subsys "${trtype}" "${subsys_name}"
+ nsdev=$(_find_nvme_passthru_loop_dev "${subsys_name}")
+
+ # The following tests can race with the creation
+ # of the device so ensure the block device exists
+ # before continuing
+ while [ ! -b "${nsdev}" ]; do sleep 1; done
+
+ echo "${nsdev}"
+}
+
+_nvmet_passthru_target_cleanup() {
+ local port=$1
+ local subsys_name=$2
+
+ _remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
+ _remove_nvmet_port "${port}"
+ _remove_nvmet_passhtru "${subsys_name}"
+}
+
_filter_discovery() {
sed -n -r -e "s/Generation counter [0-9]+/Generation counter X/" \
-e '/Discovery Log Number|Log Entry|trtype|subnqn/p'
--
2.20.1