Changes in v2:
- Added patch to fix a typo in dwc3_qcom_vbus_override_enable()
- Modified dwc3_qcom_find_usb_connector_match() to search the child nodes for
the connector device as well
- Moved out the DRD switch remote endpoint from the connector node in the
pm8150b_typec device
This series adds support for setting of the orientation multiplexor within the
QMP PHY based on the detection output from the PM8150B. It will also introduce
a role switch in DWC3 QCOM, which is used so that the DWC3 QCOM glue can receive
role switch change events, and set the vbus override accordingly. This event
will then be propagated down to the DWC3 core driver, by the DWC3 QCOM getting a
handle to the DWC3 core's role switch.
Wesley Cheng (4):
arm64: boot: dts: qcom: sm8150: Add nodes for PMIC based typec
detection
phy: qcom-qmp: Register as a typec switch for orientation detection
usb: dwc3: dwc3-qcom: Find USB connector and register role switch
usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 40 +++++++-
drivers/phy/qualcomm/Kconfig | 11 ++
drivers/phy/qualcomm/phy-qcom-qmp.c | 70 ++++++++++++-
drivers/usb/dwc3/dwc3-qcom.c | 128 ++++++++++++++++++++++--
4 files changed, 239 insertions(+), 10 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project