An empty snps,quirk-frame-length-adjustment won't cause any change
performed by the driver. Moreover the DT schema validation will fail,
since it expects the property being assigned with some value. So set
fix the example by setting a valid FL-adj value in accordance with
Neil Armstrong comment.
Link: https://lore.kernel.org/linux-usb/[email protected]/
Signed-off-by: Serge Semin <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
---
Note the same problem is in the DT source file
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi .
---
.../devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
index 5b04a7dfa018..a4b44a16aaef 100644
--- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -209,6 +209,6 @@ examples:
interrupts = <30>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
- snps,quirk-frame-length-adjustment;
+ snps,quirk-frame-length-adjustment = <0x20>;
};
};
--
2.27.0
On Wed, 14 Oct 2020 13:13:56 +0300, Serge Semin wrote:
> An empty snps,quirk-frame-length-adjustment won't cause any change
> performed by the driver. Moreover the DT schema validation will fail,
> since it expects the property being assigned with some value. So set
> fix the example by setting a valid FL-adj value in accordance with
> Neil Armstrong comment.
>
> Link: https://lore.kernel.org/linux-usb/[email protected]/
> Signed-off-by: Serge Semin <[email protected]>
> Acked-by: Neil Armstrong <[email protected]>
>
> ---
>
> Note the same problem is in the DT source file
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi .
> ---
> .../devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Rob Herring <[email protected]>
On Wed, Oct 14, 2020 at 12:14 PM Serge Semin
<[email protected]> wrote:
>
> An empty snps,quirk-frame-length-adjustment won't cause any change
> performed by the driver. Moreover the DT schema validation will fail,
> since it expects the property being assigned with some value. So set
> fix the example by setting a valid FL-adj value in accordance with
> Neil Armstrong comment.
>
> Link: https://lore.kernel.org/linux-usb/[email protected]/
> Signed-off-by: Serge Semin <[email protected]>
> Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>