This adds a unittest to test applying/reverting an overlay that contains
a link between two devices.
Signed-off-by: Michael Auchter <[email protected]>
---
drivers/of/unittest-data/Makefile | 1 +
drivers/of/unittest-data/overlay_16.dts | 26 +++++++++++++++++++++++++
drivers/of/unittest.c | 16 +++++++++++++++
3 files changed, 43 insertions(+)
create mode 100644 drivers/of/unittest-data/overlay_16.dts
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 009f4045c8e4..91a1ebbc451b 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_12.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
+ overlay_16.dtb.o \
overlay_bad_add_dup_node.dtb.o \
overlay_bad_add_dup_prop.dtb.o \
overlay_bad_phandle.dtb.o \
diff --git a/drivers/of/unittest-data/overlay_16.dts b/drivers/of/unittest-data/overlay_16.dts
new file mode 100644
index 000000000000..eda206e2ebca
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_16.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/* overlay_16 - device links */
+
+&unittest_test_bus {
+
+ /* suppress DTC warning */
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ unittest16: test-unittest16 {
+ #clock-cells = <0>;
+ compatible = "unittest";
+ status = "okay";
+ reg = <16>;
+ };
+
+ test-unittest161 {
+ compatible = "unittest";
+ status = "okay";
+ reg = <161>;
+ clocks = <&unittest16>;
+ };
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 5579584758b7..d94dafb3746f 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2369,6 +2369,18 @@ static void __init of_unittest_overlay_11(void)
unittest(ret == 0, "overlay test %d failed; overlay apply\n", 11);
}
+/* test insertion of an overlay that references another node */
+static void __init of_unittest_overlay_16(void)
+{
+ int ret;
+
+ /* device should disable */
+ ret = of_unittest_apply_revert_overlay_check(16, 16, 0, 1,
+ PDEV_OVERLAY);
+
+ unittest(ret == 0, "overlay test %d failed; overlay apply\n", 16);
+}
+
#if IS_BUILTIN(CONFIG_I2C) && IS_ENABLED(CONFIG_OF_OVERLAY)
struct unittest_i2c_bus_data {
@@ -2757,6 +2769,8 @@ static void __init of_unittest_overlay(void)
of_unittest_overlay_i2c_cleanup();
#endif
+ of_unittest_overlay_16();
+
of_unittest_overlay_gpio();
of_unittest_destroy_tracked_overlays();
@@ -2812,6 +2826,7 @@ OVERLAY_INFO_EXTERN(overlay_11);
OVERLAY_INFO_EXTERN(overlay_12);
OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15);
+OVERLAY_INFO_EXTERN(overlay_16);
OVERLAY_INFO_EXTERN(overlay_gpio_01);
OVERLAY_INFO_EXTERN(overlay_gpio_02a);
OVERLAY_INFO_EXTERN(overlay_gpio_02b);
@@ -2842,6 +2857,7 @@ static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_12, 0),
OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0),
+ OVERLAY_INFO(overlay_16, 0),
OVERLAY_INFO(overlay_gpio_01, 0),
OVERLAY_INFO(overlay_gpio_02a, 0),
OVERLAY_INFO(overlay_gpio_02b, 0),
--
2.25.4