This router has dual paritions to store trx firmware image and
dual partitions for nvram. The second one in each of these cases acts
as a backup store.
When tested with OpenWrt, the default partition parser causes two issues:
1. It labels both nvram partitions as nvram. In factory, second one is
labeled devinfo.
2. It parses second trx image and tries to create second 'linux' partition
and fails with - cannot create duplicate 'linux' partition. I've set this
partition to read-only for now
The following patch works around both of these issues.
Signed-off-by: Vivek Unune <[email protected]>
---
.../boot/dts/bcm47094-linksys-panamera.dts | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 5d5930edfb9d..13da16c5de68 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -292,3 +292,44 @@ fixed-link {
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0000000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "nvram";
+ reg = <0x080000 0x0100000>;
+ };
+
+ partition@180000{
+ label = "devinfo";
+ reg = <0x0180000 0x080000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x0200000 0x01D00000>;
+ compatible = "brcm,trx";
+ };
+
+ partition@1F00000 {
+ label = "failsafe";
+ reg = <0x01F00000 0x01D00000>;
+ read-only;
+ };
+
+ partition@0x5200000 {
+ label = "brcmnand";
+ reg = <0x05200000 0x02E00000>;
+ };
+ };
+};
--
2.25.1