From: Ioana Ciornei <[email protected]>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Martin Blumenstingl <[email protected]>
Cc: Willy Liu <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
---
drivers/net/phy/realtek.c | 60 +++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index fb1db713b7fb..dd77703af1be 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -149,6 +149,60 @@ static int rtl8211f_config_intr(struct phy_device *phydev)
return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
}
+static irqreturn_t rtl8201_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, RTL8201F_ISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (irq_status == 0)
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl821x_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, RTL821x_INSR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (irq_status == 0)
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rtl8211f_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (irq_status == 0)
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int rtl8211_config_aneg(struct phy_device *phydev)
{
int ret;
@@ -556,6 +610,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8201F Fast Ethernet",
.ack_interrupt = &rtl8201_ack_interrupt,
.config_intr = &rtl8201_config_intr,
+ .handle_interrupt = rtl8201_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
@@ -582,6 +637,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8211B Gigabit Ethernet",
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211b_config_intr,
+ .handle_interrupt = rtl821x_handle_interrupt,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.suspend = rtl8211b_suspend,
@@ -601,6 +657,7 @@ static struct phy_driver realtek_drvs[] = {
.name = "RTL8211DN Gigabit Ethernet",
.ack_interrupt = rtl821x_ack_interrupt,
.config_intr = rtl8211e_config_intr,
+ .handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
@@ -611,6 +668,7 @@ static struct phy_driver realtek_drvs[] = {
.config_init = &rtl8211e_config_init,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211e_config_intr,
+ .handle_interrupt = rtl821x_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
@@ -621,6 +679,7 @@ static struct phy_driver realtek_drvs[] = {
.config_init = &rtl8211f_config_init,
.ack_interrupt = &rtl8211f_ack_interrupt,
.config_intr = &rtl8211f_config_intr,
+ .handle_interrupt = rtl8211f_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
@@ -670,6 +729,7 @@ static struct phy_driver realtek_drvs[] = {
*/
.ack_interrupt = genphy_no_ack_interrupt,
.config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
--
2.28.0