The dtschema expects watchdog device node name to be "watchdog":
arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: wdog@2ad0000:
$nodename:0: 'wdog@2ad0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 6a2c09199047..1393fc7e56bb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -401,7 +401,7 @@ gpio1: gpio@2310000 {
#interrupt-cells = <2>;
};
- wdog0: wdog@2ad0000 {
+ wdog0: watchdog@2ad0000 {
compatible = "fsl,ls1012a-wdt",
"fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 0464b8aa4bc4..d550f00f1f6a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -725,7 +725,7 @@ lpuart5: serial@29a0000 {
status = "disabled";
};
- wdog0: wdog@2ad0000 {
+ wdog0: watchdog@2ad0000 {
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 0x4>;
--
2.25.1
On Thu, Oct 29, 2020 at 05:21:33PM +0100, Krzysztof Kozlowski wrote:
> The dtschema expects watchdog device node name to be "watchdog":
>
> arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dt.yaml: wdog@2ad0000:
> $nodename:0: 'wdog@2ad0000' does not match '^watchdog(@.*|-[0-9a-f])?$'
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
s/ARM/arm64 in subject.
I fixed it up and applied the patch.
Shawn
>
> ---
>
> Changes since v1:
> 1. New patch
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +-
> arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)