The PWM bus controlling the fan in RPi's official PoE hat can only be
controlled by the board's co-processor.
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Changes since v1:
- Update bindings to use 2 #pwm-cells
.../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
.../pwm/raspberrypi,firmware-pwm.h | 13 ++++++++++++
2 files changed, 33 insertions(+)
create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index a2c63c8b1d10..8029ce958c48 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -64,6 +64,21 @@ properties:
- compatible
- "#reset-cells"
+ pwm:
+ type: object
+
+ properties:
+ compatible:
+ const: raspberrypi,firmware-pwm
+
+ "#pwm-cells":
+ # See pwm.yaml in this directory for a description of the cells format.
+ const: 2
+
+ required:
+ - compatible
+ - "#pwm-cells"
+
additionalProperties: false
required:
@@ -87,5 +102,10 @@ examples:
compatible = "raspberrypi,firmware-reset";
#reset-cells = <1>;
};
+
+ pwm: pwm {
+ compatible = "raspberrypi,firmware-pwm";
+ #pwm-cells = <1>;
+ };
};
...
diff --git a/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h b/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
new file mode 100644
index 000000000000..27c5ce68847b
--- /dev/null
+++ b/include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Nicolas Saenz Julienne
+ * Author: Nicolas Saenz Julienne <[email protected]>
+ */
+
+#ifndef _DT_BINDINGS_RASPBERRYPI_FIRMWARE_PWM_H
+#define _DT_BINDINGS_RASPBERRYPI_FIRMWARE_PWM_H
+
+#define RASPBERRYPI_FIRMWARE_PWM_POE 0
+#define RASPBERRYPI_FIRMWARE_PWM_NUM 1
+
+#endif
--
2.29.1
On Wed, 04 Nov 2020 11:39:35 +0100, Nicolas Saenz Julienne wrote:
> The PWM bus controlling the fan in RPi's official PoE hat can only be
> controlled by the board's co-processor.
>
> Signed-off-by: Nicolas Saenz Julienne <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
>
> ---
>
> Changes since v1:
> - Update bindings to use 2 #pwm-cells
>
> .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
> .../pwm/raspberrypi,firmware-pwm.h | 13 ++++++++++++
> 2 files changed, 33 insertions(+)
> create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.example.dt.yaml: firmware: pwm:#pwm-cells:0:0: 2 was expected
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
See https://patchwork.ozlabs.org/patch/1393804
The base for the patch is generally the last rc1. Any dependencies
should be noted.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Wed, 2020-11-04 at 13:06 -0600, Rob Herring wrote:
> On Wed, 04 Nov 2020 11:39:35 +0100, Nicolas Saenz Julienne wrote:
> > The PWM bus controlling the fan in RPi's official PoE hat can only be
> > controlled by the board's co-processor.
> >
> > Signed-off-by: Nicolas Saenz Julienne <[email protected]>
> > Reviewed-by: Rob Herring <[email protected]>
> >
> > ---
> >
> > Changes since v1:
> > - Update bindings to use 2 #pwm-cells
> >
> > .../arm/bcm/raspberrypi,bcm2835-firmware.yaml | 20 +++++++++++++++++++
> > .../pwm/raspberrypi,firmware-pwm.h | 13 ++++++++++++
> > 2 files changed, 33 insertions(+)
> > create mode 100644 include/dt-bindings/pwm/raspberrypi,firmware-pwm.h
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.example.dt.yaml: firmware: pwm:#pwm-cells:0:0: 2 was expected
Yes I forgot to update the example...
Regards,
Nicolas