2020-11-08 18:54:06

by Michael Walle

Subject: [PATCH v3 2/9] arm64: dts: ls1028a: fix FlexSPI clock input

On the LS1028A the FlexSPI clock is connected to the first HWA output,
see Figure 7 "Clock subsystem block diagram".

Fixes: c77fae5ba09a ("arm64: dts: ls1028a: Add FlexSPI support")
Signed-off-by: Michael Walle <[email protected]>
---
Changes since v2:
- new patch

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index e22f29aa4658..2f60a6ba7e14 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -318,7 +318,7 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen 2 0>, <&clockgen 2 0>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
--
2.20.1

2020-11-30 09:24:17

by Shawn Guo

Subject: Re: [PATCH v3 2/9] arm64: dts: ls1028a: fix FlexSPI clock input

On Sun, Nov 08, 2020 at 07:51:06PM +0100, Michael Walle wrote:
> On the LS1028A the FlexSPI clock is connected to the first HWA output,
> see Figure 7 "Clock subsystem block diagram".
>
> Fixes: c77fae5ba09a ("arm64: dts: ls1028a: Add FlexSPI support")
> Signed-off-by: Michael Walle <[email protected]>

Applied, thanks.