From: Chen-Yu Tsai <[email protected]>
Hi everyone,
This series mainly adds support for the new Nanopi M4B, which is a newer
variant of the Nanopi M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
While working on this, I found that for the M4 family, the PCIe reset
pin (from the M.2 expansion board) was not wired to the SoC. Only the
NanoPC T4 has this wired. This ended up in patches 1 and 3.
Patch 1 makes ep_gpio in the Rockchip PCIe driver optional. This property
is optional in the DT binding, so this just makes the driver adhere to
the binding.
Patch 2 adds a new compatible string for the new board.
Patch 3 moves the ep-gpios property of the pcie controller from the
common nanopi4.dtsi file to the nanopc-t4.dts file.
Patch 4 adds a new device tree file for the new board. It includes the
original device tree for the M4, and then lists the differences.
Given that patch 3 would make PCIe unusable without patch 1, I suggest
merging patch 1 through the PCI tree as a fix for 5.10, and the rest
for 5.11 through the Rockchip tree.
Please have a look. The changes are mostly trivial.
Regards
ChenYu
Chen-Yu Tsai (4):
PCI: rockchip: make ep_gpio optional
dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
arm64: dts: rockchip: nanopi4: Move ep-gpios property to nanopc-t4
arm64: dts: rockchip: rk3399: Add NanoPi M4B
.../devicetree/bindings/arm/rockchip.yaml | 1 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-nanopc-t4.dts | 1 +
.../boot/dts/rockchip/rk3399-nanopi-m4b.dts | 52 +++++++++++++++++++
.../boot/dts/rockchip/rk3399-nanopi4.dtsi | 1 -
drivers/pci/controller/pcie-rockchip.c | 2 +-
6 files changed, 56 insertions(+), 2 deletions(-)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
--
2.29.1
From: Chen-Yu Tsai <[email protected]>
The NanoPi M4B is a minor revision of the original M4.
The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:
- microphone header removed
- power button added
- recovery button added
Additional changes specific to the M4B:
- USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
USB 2.0 ports
- ADB toggle switch added; this changes the top USB 3.0 host port to
a peripheral port
- Type-C port no longer supports data or PD
- WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
but only 1T1R (down from 2T2R) for WiFi
Add a new dts file for the new board revision that shows the difference
against the original.
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399-nanopi-m4b.dts | 52 +++++++++++++++++++
2 files changed, 53 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5a53979b7057..fd47414e40eb 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-kobol-helios64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
new file mode 100644
index 000000000000..72182c58cc46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * FriendlyElec NanoPi M4B board device tree source
+ *
+ * Copyright (c) 2020 Chen-Yu Tsai <[email protected]>
+ */
+
+/dts-v1/;
+#include "rk3399-nanopi-m4.dts"
+
+/ {
+ model = "FriendlyElec NanoPi M4B";
+ compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1500000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+};
+
+/* No USB type-C PD power manager */
+/delete-node/ &fusb0;
+
+&i2c4 {
+ status = "disabled";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_usb2>;
+};
+
+&u2phy0_otg {
+ phy-supply = <&vbus_typec>;
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_usb1>;
+};
+
+&vbus_typec {
+ enable-active-high;
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+};
--
2.29.1