From: Ioana Ciornei <[email protected]>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Signed-off-by: Ioana Ciornei <[email protected]>
---
drivers/net/phy/qsemi.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 1b15a991ee06..97f29ed2f0ca 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -106,6 +106,27 @@ static int qs6612_config_intr(struct phy_device *phydev)
}
+static irqreturn_t qs6612_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, MII_QS6612_ISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & MII_QS6612_IMR_INIT))
+ return IRQ_NONE;
+
+ /* the interrupt source register is not self-clearing */
+ qs6612_ack_interrupt(phydev);
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static struct phy_driver qs6612_driver[] = { {
.phy_id = 0x00181440,
.name = "QS6612",
@@ -114,6 +135,7 @@ static struct phy_driver qs6612_driver[] = { {
.config_init = qs6612_config_init,
.ack_interrupt = qs6612_ack_interrupt,
.config_intr = qs6612_config_intr,
+ .handle_interrupt = qs6612_handle_interrupt,
} };
module_phy_driver(qs6612_driver);
--
2.28.0