From: Ioana Ciornei <[email protected]>
Now that all the PHY drivers have been migrated to directly implement
the generic .handle_interrupt() callback for a seamless support of
shared IRQs and all the .config_inter() implementations clear any
pending interrupts, we can safely remove the two callbacks.
With this patch, phylib has a proper support for shared IRQs (and not
just for multi-PHY devices. A PHY driver must implement both the
.handle_interrupt() and .config_intr() callbacks for the IRQs to be
actually used.
Signed-off-by: Ioana Ciornei <[email protected]>
---
drivers/net/phy/phy.c | 48 ++----------------------------------
drivers/net/phy/phy_device.c | 2 +-
include/linux/phy.h | 19 +++-----------
3 files changed, 7 insertions(+), 62 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index dce86bad8231..45f75533c47c 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -113,23 +113,6 @@ void phy_print_status(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_print_status);
-/**
- * phy_clear_interrupt - Ack the phy device's interrupt
- * @phydev: the phy_device struct
- *
- * If the @phydev driver has an ack_interrupt function, call it to
- * ack and clear the phy device's interrupt.
- *
- * Returns 0 on success or < 0 on error.
- */
-static int phy_clear_interrupt(struct phy_device *phydev)
-{
- if (phydev->drv->ack_interrupt)
- return phydev->drv->ack_interrupt(phydev);
-
- return 0;
-}
-
/**
* phy_config_interrupt - configure the PHY device for the requested interrupts
* @phydev: the phy_device struct
@@ -943,15 +926,8 @@ EXPORT_SYMBOL(phy_error);
*/
int phy_disable_interrupts(struct phy_device *phydev)
{
- int err;
-
/* Disable PHY interrupts */
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
- if (err)
- return err;
-
- /* Clear the interrupt */
- return phy_clear_interrupt(phydev);
+ return phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
}
/**
@@ -966,22 +942,7 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
struct phy_device *phydev = phy_dat;
struct phy_driver *drv = phydev->drv;
- if (drv->handle_interrupt)
- return drv->handle_interrupt(phydev);
-
- if (drv->did_interrupt && !drv->did_interrupt(phydev))
- return IRQ_NONE;
-
- /* reschedule state queue work to run as soon as possible */
- phy_trigger_machine(phydev);
-
- /* did_interrupt() may have cleared the interrupt already */
- if (!drv->did_interrupt && phy_clear_interrupt(phydev)) {
- phy_error(phydev);
- return IRQ_NONE;
- }
-
- return IRQ_HANDLED;
+ return drv->handle_interrupt(phydev);
}
/**
@@ -990,11 +951,6 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
*/
static int phy_enable_interrupts(struct phy_device *phydev)
{
- int err = phy_clear_interrupt(phydev);
-
- if (err < 0)
- return err;
-
return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
}
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 81f672911305..80c2e646c093 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2826,7 +2826,7 @@ EXPORT_SYMBOL(phy_get_internal_delay);
static bool phy_drv_supports_irq(struct phy_driver *phydrv)
{
- return phydrv->config_intr && (phydrv->ack_interrupt || phydrv->handle_interrupt);
+ return phydrv->config_intr && phydrv->handle_interrupt;
}
/**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8849a00a093f..381a95732b6a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -743,18 +743,11 @@ struct phy_driver {
/** @read_status: Determines the negotiated speed and duplex */
int (*read_status)(struct phy_device *phydev);
- /** @ack_interrupt: Clears any pending interrupts */
- int (*ack_interrupt)(struct phy_device *phydev);
-
- /** @config_intr: Enables or disables interrupts */
- int (*config_intr)(struct phy_device *phydev);
-
- /**
- * @did_interrupt: Checks if the PHY generated an interrupt.
- * For multi-PHY devices with shared PHY interrupt pin
- * Set interrupt bits have to be cleared.
+ /** @config_intr: Enables or disables interrupts.
+ * It should also clear any pending interrupts prior to enabling the
+ * IRQs and after disabling them.
*/
- int (*did_interrupt)(struct phy_device *phydev);
+ int (*config_intr)(struct phy_device *phydev);
/** @handle_interrupt: Override default interrupt handling */
irqreturn_t (*handle_interrupt)(struct phy_device *phydev);
@@ -1487,10 +1480,6 @@ static inline int genphy_config_aneg(struct phy_device *phydev)
return __genphy_config_aneg(phydev, false);
}
-static inline int genphy_no_ack_interrupt(struct phy_device *phydev)
-{
- return 0;
-}
static inline int genphy_no_config_intr(struct phy_device *phydev)
{
return 0;
--
2.28.0