Tweak the node name to make it aliasable, then add aliases for the
on-board RTC chip and meson-vrtc timer so they probe as rtc0 and
rtc1 respectively.
before:
VIM3:~ # dmesg | grep rtc
[ 3.622530] meson-vrtc ff8000a8.rtc: registered as rtc0
[ 3.622574] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
[ 3.646936] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.647125] rtc-hym8563 0-0051: registered as rtc1
[ 3.852382] rtc-hym8563 0-0051: no valid clock/calendar values available
after:
VIM3:~ # dmesg | grep rtc
[ 3.583735] meson-vrtc ff8000a8.rtc: registered as rtc1
[ 3.633888] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.634120] rtc-hym8563 0-0051: registered as rtc0
[ 3.635250] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 3.635267] rtc-hym8563 0-0051: hctosys: unable to read the hardware clock
[ 3.852632] rtc-hym8563 0-0051: no valid clock/calendar values available
Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 69e6c03a787c..8f8656262ae7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -14,6 +14,8 @@
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
+ rtc0 = &rtc;
+ rtc1 = &vrtc;
};
chosen {
@@ -333,7 +335,7 @@
#gpio-cells = <2>;
};
- rtc@51 {
+ rtc: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
--
2.17.1