The PMIC throws an errors because the clock isn't assigned to it.
Fix this by assigning the clocks info.
Fixes: acb01032e11a ("arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC")
Signed-off-by: Adam Ford <[email protected]>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 9bdefbba9e90..d897913537ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -111,6 +111,10 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
regulators {
buck1_reg: BUCK1 {
regulator-name = "buck1";
--
2.25.1
On Wed, Nov 25, 2020 at 03:03:39PM -0600, Adam Ford wrote:
> The PMIC throws an errors because the clock isn't assigned to it.
> Fix this by assigning the clocks info.
>
> Fixes: acb01032e11a ("arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC")
Hi,
This is not the correct Fixes tag. The defconfig change did not
introduce any bug in DTS. The error message was there before, regardless
of defconfigs. Defconfigs are merely a development or distro aid, not a
definition of working state.
If it really was a bug, then the commit adding DTS is to blame.
Second, I am not sure if there is a bug here to fix - having incomplete
DTS is a bug? Missing device nodes in DTS is a bug?
Also, pay attention to proper white spaces. There is only single
whitespace after ':' and no blank line after entire Fixes tag.
Best regards,
Krzysztof