2020-12-09 22:13:53

by Lukasz Majewski

[permalink] [raw]
Subject: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

From: Mans Rullgard <[email protected]>

Add pinmux setting for USB1 overcurrent on pwm2 pad.

Signed-off-by: Mans Rullgard <[email protected]>
Signed-off-by: Lukasz Majewski <[email protected]>
---
Changes for v2:
- Add S-o-B
---
arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index bbe52150b165..84d0176d5193 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -948,6 +948,16 @@
fsl,pull-up = <MXS_PULL_DISABLE>;
};

+ usb1_pins_b: usb1@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ MX28_PAD_PWM2__USB1_OVERCURRENT
+ >;
+ fsl,drive-strength = <MXS_DRIVE_12mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
usb0_id_pins_a: usb0id@0 {
reg = <0>;
fsl,pinmux-ids = <
--
2.20.1


2020-12-22 17:45:03

by Lukasz Majewski

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

Hi Shawn,

> From: Mans Rullgard <[email protected]>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>

Gentle ping on this patch.

> Signed-off-by: Mans Rullgard <[email protected]>
> Signed-off-by: Lukasz Majewski <[email protected]>
> ---
> Changes for v2:
> - Add S-o-B
> ---
> arch/arm/boot/dts/imx28.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx28.dtsi
> b/arch/arm/boot/dts/imx28.dtsi index bbe52150b165..84d0176d5193 100644
> --- a/arch/arm/boot/dts/imx28.dtsi
> +++ b/arch/arm/boot/dts/imx28.dtsi
> @@ -948,6 +948,16 @@
> fsl,pull-up =
> <MXS_PULL_DISABLE>; };
>
> + usb1_pins_b: usb1@1 {
> + reg = <1>;
> + fsl,pinmux-ids = <
> +
> MX28_PAD_PWM2__USB1_OVERCURRENT
> + >;
> + fsl,drive-strength =
> <MXS_DRIVE_12mA>;
> + fsl,voltage =
> <MXS_VOLTAGE_HIGH>;
> + fsl,pull-up =
> <MXS_PULL_DISABLE>;
> + };
> +
> usb0_id_pins_a: usb0id@0 {
> reg = <0>;
> fsl,pinmux-ids = <




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]

Attachments:
(No filename) (499.00 B)
OpenPGP digital signature

2020-12-22 17:45:43

by Fabio Estevam

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

On Wed, Dec 9, 2020 at 7:10 PM Lukasz Majewski <[email protected]> wrote:
>
> From: Mans Rullgard <[email protected]>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
> Signed-off-by: Mans Rullgard <[email protected]>
> Signed-off-by: Lukasz Majewski <[email protected]>

Reviewed-by: Fabio Estevam <[email protected]>

2021-01-07 03:30:11

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: dts: imx28: add pinmux for USB1 overcurrent on pwm2

On Wed, Dec 09, 2020 at 11:09:03PM +0100, Lukasz Majewski wrote:
> From: Mans Rullgard <[email protected]>
>
> Add pinmux setting for USB1 overcurrent on pwm2 pad.
>
> Signed-off-by: Mans Rullgard <[email protected]>
> Signed-off-by: Lukasz Majewski <[email protected]>

Applied, thanks.