Auto discharge circuits kick in only when vbus decays and reaches
VBUS_SINK_DISCONNECT_THRESHOLD threshold. Enable bleed discharge to
discharge vbus to VBUS_SINK_DISCONNECT_THRESHOLD upon disconnect.
Signed-off-by: Badhri Jagan Sridharan <[email protected]>
---
drivers/usb/typec/tcpm/tcpci.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index af5524338a63..f676abab044b 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -725,6 +725,8 @@ struct tcpci *tcpci_register_port(struct device *dev, struct tcpci_data *data)
tcpci->tcpc.enable_auto_vbus_discharge = tcpci_enable_auto_vbus_discharge;
tcpci->tcpc.set_auto_vbus_discharge_threshold =
tcpci_set_auto_vbus_discharge_threshold;
+ regmap_update_bits(tcpci->regmap, TCPC_POWER_CTRL, TCPC_POWER_CTRL_BLEED_DISCHARGE,
+ TCPC_POWER_CTRL_BLEED_DISCHARGE);
}
if (tcpci->data->vbus_vsafe0v)
--
2.29.2.576.ga3fc446d84-goog