From: Mirela Rabulea <[email protected]>
Add jpeg decoder/encoder nodes, for now on imx8qxp only.
The same should work on imx8qm, but it was not tested.
Signed-off-by: Mirela Rabulea <[email protected]>
---
Changes in v6:
Pure memory-to-memory are typically not enabled per-board, but just per-platform
Thanks Ezequiel for feedback.
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e46faac1fe71..ee822560af54 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -629,4 +629,39 @@
};
};
};
+
+ img_subsys: bus@58000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x58000000 0x0 0x58000000 0x1000000>;
+
+ jpegdec: jpegdec@58400000 {
+ compatible = "nxp,imx8qxp-jpgdec";
+ reg = <0x58400000 0x00050000 >;
+ interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MJPEG_DEC_MP>,
+ <&pd IMX_SC_R_MJPEG_DEC_S0>,
+ <&pd IMX_SC_R_MJPEG_DEC_S1>,
+ <&pd IMX_SC_R_MJPEG_DEC_S2>,
+ <&pd IMX_SC_R_MJPEG_DEC_S3>;
+ };
+
+ jpegenc: jpegenc@58450000 {
+ compatible = "nxp,imx8qxp-jpgenc";
+ reg = <0x58450000 0x00050000 >;
+ interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd IMX_SC_R_MJPEG_ENC_MP>,
+ <&pd IMX_SC_R_MJPEG_ENC_S0>,
+ <&pd IMX_SC_R_MJPEG_ENC_S1>,
+ <&pd IMX_SC_R_MJPEG_ENC_S2>,
+ <&pd IMX_SC_R_MJPEG_ENC_S3>;
+ };
+ };
};
--
2.17.1