LinuxLists.cc - [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

2020-12-15 19:44:14

Subject: [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

Dear Reviewer,

Fix AST2600 EVB NCSI RX timeout issue by removing FTGMAC100_RXDES0_RX_ERR bit
from macro RXDES0_ANY_ERROR.

Hongwei Zhang (1):
net: ftgmac100: Fix AST2600 EVB NCSI RX issue

drivers/net/ethernet/faraday/ftgmac100.h | 1 -
1 file changed, 1 deletion(-)

--
2.17.1

2020-12-15 19:44:29

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1 1/1] net: ftgmac100: Fix AST2600 EVB NCSI RX issue

Fix AST2600 EVB NCSI RX timeout issue by removing FTGMAC100_RXDES0_RX_ERR bit
from macro RXDES0_ANY_ERROR.

Signed-off-by: Hongwei Zhang <[email protected]>
---
drivers/net/ethernet/faraday/ftgmac100.h | 1 -
1 file changed, 1 deletion(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 63b3e02fab16..734477e6f72f 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -252,7 +252,6 @@ struct ftgmac100_rxdes {

/* Errors we care about for dropping packets */
#define RXDES0_ANY_ERROR ( \
- FTGMAC100_RXDES0_RX_ERR | \
FTGMAC100_RXDES0_CRC_ERR | \
FTGMAC100_RXDES0_FTL | \
FTGMAC100_RXDES0_RUNT | \
--
2.17.1

2020-12-15 20:42:57

by Jakub Kicinski

[permalink] [raw]

Subject: Re: [Aspeed,ncsi-rx, v1 1/1] net: ftgmac100: Fix AST2600 EVB NCSI RX issue

On Tue, 15 Dec 2020 14:23:23 -0500 Hongwei Zhang wrote:
> Fix AST2600 EVB NCSI RX timeout issue by removing FTGMAC100_RXDES0_RX_ERR bit
> from macro RXDES0_ANY_ERROR.
>
> Signed-off-by: Hongwei Zhang <[email protected]>

Thanks for the patch. Please repost CCing the netdev mailing list so it
can be merged to the networking tree (which I assume is your intent).
Please also include a Fixes tag pointing to the commit where the
timeout issue started (even if it's the first commit of the driver).

2020-12-21 17:03:04

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

Hi Andrew,

> From: Andrew Jeffery <[email protected]>
>
> > Fix AST2600 EVB NCSI RX timeout issue by removing
> > FTGMAC100_RXDES0_RX_ERR bit from macro RXDES0_ANY_ERROR.
>
> But why? What is wrong with the EVB that this change resolves? Which revision of the EVB?
>
> The change affects all designs using the MAC, not just the AST2600 EVB. Why is this patch an
> appropriate course of action? Can we not add a quirk targeting the specific board (e.g. a devicetree
> property)?

You are correct. I was in a rush and didn't put this patch under whole picture
of the driver it affected. I revised the cover letter with more information, also
use a configurable flag to isolate the change. please review the new approach.

>
> Andrew
>
Thanks,
--Hongwei

2020-12-21 17:03:37

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

Dear Reviewer,

When FTGMAC100 driver is used on other NCSI Ethernet controllers, few
controllers have compatible issue. One example is Intel I210 Ethernet
controller on AST2600 BMC, with FTGMAC100 driver, it always trigger
RXDES0_RX_ERR error, cause NCSI initialization failure, removing
FTGMAC100_RXDES0_RX_ERR bit from RXDES0_ANY_ERROR fix the issue.

Here are part of the debug logs:
......
[ 35.075552] ftgmac100_hard_start_xmit TXDESO=b000003c
[ 35.080843] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 55
[ 35.087141] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
[ 35.094448] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
[ 35.101498] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
[ 35.108205] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
[ 35.287808] i2c i2c-1: new_device: Instantiated device slave-mqueue at 0x12
[ 35.428379] ftgmac100_hard_start_xmit TXDESO=b000003c
[ 35.433624] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 56
[ 35.439915] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
[ 35.447225] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
[ 35.454273] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
[ 35.460972] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
[ 35.797825] ftgmac100_hard_start_xmit TXDESO=b000003c
[ 35.803241] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 57
[ 35.809541] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
[ 35.816848] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
[ 35.823899] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
[ 35.830597] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
[ 36.179914] ftgmac100_hard_start_xmit TXDESO=b000003c
[ 36.185160] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 58
[ 36.191454] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
[ 36.198761] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
[ 36.205813] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
[ 36.212513] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
[ 36.593688] ftgmac100_hard_start_xmit TXDESO=b000003c
[ 36.602937] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 59
[ 36.609244] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
[ 36.616558] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
[ 36.623608] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
[ 36.630315] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
[ 37.031524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.067831] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
............

This patch add a configurable flag, FTGMAC100_RXDES0_RX_ERR_CHK, in FTGMAC100
driver, it is YES by default, so keep the orignal define of
RXDES0_ANY_ERROR. If it is needed, user can set the flag to NO to remove
the RXDES0_RX_ERR bit, to fix the issue.

Hongwei Zhang (1):
net: ftgmac100: Fix AST2600 EVB NCSI RX issue

drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
2 files changed, 17 insertions(+)

--
2.17.1

2020-12-21 17:04:58

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1 1/1] net: ftgmac100: Fix AST2600 EVB NCSI RX issue

When FTGMAC100 driver is used on other NCSI Ethernet controllers, few
controllers have compatible issue, removing FTGMAC100_RXDES0_RX_ERR bit
from RXDES0_ANY_ERROR can fix the issue.

Fixes: 7ee2d5b4d4340353 ("ARM: dts: nuvoton: Add Fii Kudo system")
Signed-off-by: Hongwei Zhang <[email protected]>
---
drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
2 files changed, 17 insertions(+)

diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
index c2677ec0564d..ccd0c30be0db 100644
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
@@ -38,4 +38,13 @@ config FTGMAC100
from Faraday. It is used on Faraday A369, Andes AG102 and some
other ARM/NDS32 SoC's.

+config FTGMAC100_RXDES0_RX_ERR_CHK
+ bool "Include FTGMAC100_RXDES0_RX_ERR in RXDES0_ANY_ERROR"
+ default y
+ depends on FTGMAC100
+ help
+ Say N here if the NCSI controller on your platform has compatible
+ issue with FTGMAC100, thus always trigger RXDES0_RX_ERR. Exclude
+ this bit can fix the issue.
+
endif # NET_VENDOR_FARADAY
diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
index 63b3e02fab16..59e1bd52d261 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.h
+++ b/drivers/net/ethernet/faraday/ftgmac100.h
@@ -251,12 +251,20 @@ struct ftgmac100_rxdes {
#define FTGMAC100_RXDES0_RXPKT_RDY (1 << 31)

/* Errors we care about for dropping packets */
+#ifdef CONFIG_FTGMAC100_RXDES0_RX_ERR_CHK
#define RXDES0_ANY_ERROR ( \
FTGMAC100_RXDES0_RX_ERR | \
FTGMAC100_RXDES0_CRC_ERR | \
FTGMAC100_RXDES0_FTL | \
FTGMAC100_RXDES0_RUNT | \
FTGMAC100_RXDES0_RX_ODD_NB)
+#else
+#define RXDES0_ANY_ERROR ( \
+ FTGMAC100_RXDES0_CRC_ERR | \
+ FTGMAC100_RXDES0_FTL | \
+ FTGMAC100_RXDES0_RUNT | \
+ FTGMAC100_RXDES0_RX_ODD_NB)
+#endif

#define FTGMAC100_RXDES1_VLANTAG_CI 0xffff
#define FTGMAC100_RXDES1_PROT_MASK (0x3 << 20)
--
2.17.1

2020-12-21 17:05:06

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1] Answer to initial submission

Hi Jakub,

> From: Jakub Kicinski <[email protected]>
>
> > ...
> > Signed-off-by: Hongwei Zhang <[email protected]>
>
> Thanks for the patch. Please repost CCing the netdev mailing list so it can be merged to the networking
> tree (which I assume is your intent).
> Please also include a Fixes tag pointing to the commit where the timeout issue started (even if it's the
> first commit of the driver).
>
I updated the cc list and cover letter accordingly, also addressed
Andrew's question. please review.

Thanks,
--Hongwei

--
2.17.1

2020-12-21 19:42:11

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v2 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

2020-12-21 19:42:17

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v2 1/1] net: ftgmac100: Fix AST2600 EVB NCSI RX issue

2020-12-21 22:13:01

by Jakub Kicinski

[permalink] [raw]

Subject: Re: [Aspeed,ncsi-rx, v2 1/1] net: ftgmac100: Fix AST2600 EVB NCSI RX issue

On Mon, 21 Dec 2020 14:40:26 -0500 Hongwei Zhang wrote:
> When FTGMAC100 driver is used on other NCSI Ethernet controllers, few

When you say NCSI Ethernet controller here you mean the main system
NIC, right? The MAC on the NCSI side is FTGMAC100, correct?

In that case I'm not sure how user is supposed to control this setting
at build time. The system NIC is often pluggable on the PCIe bus, and
can be changed at will.

> controllers have compatible issue, removing FTGMAC100_RXDES0_RX_ERR bit
> from RXDES0_ANY_ERROR can fix the issue.
>
> Fixes: 7ee2d5b4d4340353 ("ARM: dts: nuvoton: Add Fii Kudo system")

Please fix the commit hash, this hash does not exist upstream:

Commit: 8711d4ef64fa ("net: ftgmac100: Fix AST2600 EVB NCSI RX issue")
Fixes tag: Fixes: 7ee2d5b4d4340353 ("ARM: dts: nuvoton: Add Fii Kudo system")
Has these problem(s):
- Target SHA1 does not exist

> Signed-off-by: Hongwei Zhang <[email protected]>
> ---
> drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
> drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/drivers/net/ethernet/faraday/Kconfig b/drivers/net/ethernet/faraday/Kconfig
> index c2677ec0564d..ccd0c30be0db 100644
> --- a/drivers/net/ethernet/faraday/Kconfig
> +++ b/drivers/net/ethernet/faraday/Kconfig
> @@ -38,4 +38,13 @@ config FTGMAC100
> from Faraday. It is used on Faraday A369, Andes AG102 and some
> other ARM/NDS32 SoC's.
>
> +config FTGMAC100_RXDES0_RX_ERR_CHK
> + bool "Include FTGMAC100_RXDES0_RX_ERR in RXDES0_ANY_ERROR"
> + default y
> + depends on FTGMAC100
> + help
> + Say N here if the NCSI controller on your platform has compatible
> + issue with FTGMAC100, thus always trigger RXDES0_RX_ERR. Exclude
> + this bit can fix the issue.
> +
> endif # NET_VENDOR_FARADAY
> diff --git a/drivers/net/ethernet/faraday/ftgmac100.h b/drivers/net/ethernet/faraday/ftgmac100.h
> index 63b3e02fab16..59e1bd52d261 100644
> --- a/drivers/net/ethernet/faraday/ftgmac100.h
> +++ b/drivers/net/ethernet/faraday/ftgmac100.h
> @@ -251,12 +251,20 @@ struct ftgmac100_rxdes {
> #define FTGMAC100_RXDES0_RXPKT_RDY (1 << 31)
>
> /* Errors we care about for dropping packets */
> +#ifdef CONFIG_FTGMAC100_RXDES0_RX_ERR_CHK
> #define RXDES0_ANY_ERROR ( \
> FTGMAC100_RXDES0_RX_ERR | \
> FTGMAC100_RXDES0_CRC_ERR | \
> FTGMAC100_RXDES0_FTL | \
> FTGMAC100_RXDES0_RUNT | \
> FTGMAC100_RXDES0_RX_ODD_NB)
> +#else
> +#define RXDES0_ANY_ERROR ( \
> + FTGMAC100_RXDES0_CRC_ERR | \
> + FTGMAC100_RXDES0_FTL | \
> + FTGMAC100_RXDES0_RUNT | \
> + FTGMAC100_RXDES0_RX_ODD_NB)
> +#endif
>
> #define FTGMAC100_RXDES1_VLANTAG_CI 0xffff
> #define FTGMAC100_RXDES1_PROT_MASK (0x3 << 20)

2020-12-22 02:28:58

by Joel Stanley

[permalink] [raw]

Subject: Re: [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

On Mon, 21 Dec 2020 at 17:01, Hongwei Zhang <[email protected]> wrote:
>
> Dear Reviewer,
>
> When FTGMAC100 driver is used on other NCSI Ethernet controllers, few
> controllers have compatible issue. One example is Intel I210 Ethernet
> controller on AST2600 BMC, with FTGMAC100 driver, it always trigger
> RXDES0_RX_ERR error, cause NCSI initialization failure, removing
> FTGMAC100_RXDES0_RX_ERR bit from RXDES0_ANY_ERROR fix the issue.

I work with a few systems that use the i210 on the 2600. We haven't
seen this issue in our testing.

Is there something specific about the setup that you use to trigger this?

Ryan, is this an issue that Aspeed is aware of?

Cheers,

Joel

>
> Here are part of the debug logs:
> ......
> [ 35.075552] ftgmac100_hard_start_xmit TXDESO=b000003c
> [ 35.080843] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 55
> [ 35.087141] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
> [ 35.094448] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
> [ 35.101498] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
> [ 35.108205] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
> [ 35.287808] i2c i2c-1: new_device: Instantiated device slave-mqueue at 0x12
> [ 35.428379] ftgmac100_hard_start_xmit TXDESO=b000003c
> [ 35.433624] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 56
> [ 35.439915] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
> [ 35.447225] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
> [ 35.454273] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
> [ 35.460972] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
> [ 35.797825] ftgmac100_hard_start_xmit TXDESO=b000003c
> [ 35.803241] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 57
> [ 35.809541] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
> [ 35.816848] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
> [ 35.823899] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
> [ 35.830597] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
> [ 36.179914] ftgmac100_hard_start_xmit TXDESO=b000003c
> [ 36.185160] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 58
> [ 36.191454] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
> [ 36.198761] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
> [ 36.205813] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
> [ 36.212513] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
> [ 36.593688] ftgmac100_hard_start_xmit TXDESO=b000003c
> [ 36.602937] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 59
> [ 36.609244] ftgmac100 1e660000.ethernet eth0: rx_packet_error RXDES0=0xb0070040
> [ 36.616558] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000 RXDES2=88f8
> [ 36.623608] ftgmac100 1e660000.ethernet eth0: rx_packet_error 0xb0070040
> [ 36.630315] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040: RX_ERR
> [ 37.031524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 37.067831] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> ............
>
> This patch add a configurable flag, FTGMAC100_RXDES0_RX_ERR_CHK, in FTGMAC100
> driver, it is YES by default, so keep the orignal define of
> RXDES0_ANY_ERROR. If it is needed, user can set the flag to NO to remove
> the RXDES0_RX_ERR bit, to fix the issue.
>
> Hongwei Zhang (1):
> net: ftgmac100: Fix AST2600 EVB NCSI RX issue
>
> drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
> drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
> 2 files changed, 17 insertions(+)
>
> --
> 2.17.1
>

2020-12-22 02:47:24

by Dylan Hung

[permalink] [raw]

Subject: RE: [Aspeed, ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

Hi Hongwei,

The NCSI should run on 3.3V RMII. According your log, you enabled NCSI on ftgmac100@1e660000 which can only support 1.8V I/O voltage.
Did you observe the same error on ftgmac100@1e670000 (MAC3) or ftgmac100@1e690000 (MAC4)?

--
Dylan

> -----Original Message-----
> From: Linux-aspeed
> [mailto:[email protected]]
> On Behalf Of Joel Stanley
> Sent: 2020年12月22日 10:26 AM
> To: Hongwei Zhang <[email protected]>; Ryan Chen
> <[email protected]>
> Cc: linux-aspeed <[email protected]>; netdev
> <[email protected]>; OpenBMC Maillist <[email protected]>;
> Linux Kernel Mailing List <[email protected]>; Jakub Kicinski
> <[email protected]>; David S Miller <[email protected]>
> Subject: Re: [Aspeed, ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX
> issue
>
> On Mon, 21 Dec 2020 at 17:01, Hongwei Zhang <[email protected]> wrote:
> >
> > Dear Reviewer,
> >
> > When FTGMAC100 driver is used on other NCSI Ethernet controllers, few
> > controllers have compatible issue. One example is Intel I210 Ethernet
> > controller on AST2600 BMC, with FTGMAC100 driver, it always trigger
> > RXDES0_RX_ERR error, cause NCSI initialization failure, removing
> > FTGMAC100_RXDES0_RX_ERR bit from RXDES0_ANY_ERROR fix the issue.
>
> I work with a few systems that use the i210 on the 2600. We haven't seen this
> issue in our testing.
>
> Is there something specific about the setup that you use to trigger this?
>
> Ryan, is this an issue that Aspeed is aware of?
>
> Cheers,
>
> Joel
>
> >
> > Here are part of the debug logs:
> > ......
> > [ 35.075552] ftgmac100_hard_start_xmit TXDESO=b000003c
> > [ 35.080843] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 55
> > [ 35.087141] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> RXDES0=0xb0070040
> > [ 35.094448] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000
> RXDES2=88f8
> > [ 35.101498] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> 0xb0070040
> > [ 35.108205] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040:
> RX_ERR
> > [ 35.287808] i2c i2c-1: new_device: Instantiated device slave-mqueue at
> 0x12
> > [ 35.428379] ftgmac100_hard_start_xmit TXDESO=b000003c
> > [ 35.433624] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 56
> > [ 35.439915] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> RXDES0=0xb0070040
> > [ 35.447225] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000
> RXDES2=88f8
> > [ 35.454273] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> 0xb0070040
> > [ 35.460972] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040:
> RX_ERR
> > [ 35.797825] ftgmac100_hard_start_xmit TXDESO=b000003c
> > [ 35.803241] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 57
> > [ 35.809541] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> RXDES0=0xb0070040
> > [ 35.816848] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000
> RXDES2=88f8
> > [ 35.823899] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> 0xb0070040
> > [ 35.830597] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040:
> RX_ERR
> > [ 36.179914] ftgmac100_hard_start_xmit TXDESO=b000003c
> > [ 36.185160] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 58
> > [ 36.191454] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> RXDES0=0xb0070040
> > [ 36.198761] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000
> RXDES2=88f8
> > [ 36.205813] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> 0xb0070040
> > [ 36.212513] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040:
> RX_ERR
> > [ 36.593688] ftgmac100_hard_start_xmit TXDESO=b000003c
> > [ 36.602937] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 59
> > [ 36.609244] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> RXDES0=0xb0070040
> > [ 36.616558] ftgmac100_rx_packet RXDES0=b0070040 RXDES1=f0800000
> RXDES2=88f8
> > [ 36.623608] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> 0xb0070040
> > [ 36.630315] ftgmac100 1e660000.ethernet eth0: [ISR] = 0xb0070040:
> RX_ERR
> > [ 37.031524] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
> > [ 37.067831] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> > ............
> >
> > This patch add a configurable flag, FTGMAC100_RXDES0_RX_ERR_CHK, in
> > FTGMAC100 driver, it is YES by default, so keep the orignal define of
> > RXDES0_ANY_ERROR. If it is needed, user can set the flag to NO to
> > remove the RXDES0_RX_ERR bit, to fix the issue.
> >
> > Hongwei Zhang (1):
> > net: ftgmac100: Fix AST2600 EVB NCSI RX issue
> >
> > drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
> > drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
> > 2 files changed, 17 insertions(+)
> >
> > --
> > 2.17.1
> >

2021-01-11 21:03:00

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v2 1/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

>
> From: Jakub Kicinski <[email protected]>
> Sent: Monday, December 21, 2020 5:10 PM
> To: Hongwei Zhang
>
> On Mon, 21 Dec 2020 14:40:26 -0500 Hongwei Zhang wrote:
> > When FTGMAC100 driver is used on other NCSI Ethernet controllers, few
>
> When you say NCSI Ethernet controller here you mean the main system NIC, right? The MAC on the NCSI
> side is FTGMAC100, correct?
>

Hi Jakub,

The use case for us is the MAC is configured as NCSI, so it provides network
access for both BMC and Host, the Ethernet controller driver is from BMC kernel
side.

please see my response to Dylan in another thread, <[email protected]>,
he points out the root cause of the issue.

> In that case I'm not sure how user is supposed to control this setting at build time. The system NIC is
> often pluggable on the PCIe bus, and can be changed at will.
>
> > controllers have compatible issue, removing FTGMAC100_RXDES0_RX_ERR
> > bit from RXDES0_ANY_ERROR can fix the issue.
> >
> > Fixes: 7ee2d5b4d4340353 ("ARM: dts: nuvoton: Add Fii Kudo system")
>
> Please fix the commit hash, this hash does not exist upstream:
>

will do.

Thanks
--Hongwei

> Commit: 8711d4ef64fa ("net: ftgmac100: Fix AST2600 EVB NCSI RX issue")
> Fixes tag: Fixes: 7ee2d5b4d4340353 ("ARM: dts: nuvoton: Add Fii Kudo system")
> Has these problem(s):
> - Target SHA1 does not exist
>

2021-01-11 21:03:12

by Hongwei Zhang

[permalink] [raw]

Subject: [Aspeed,ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB NCSI RX issue

>
> Hi Hongwei,
>
> The NCSI should run on 3.3V RMII. According your log, you enabled NCSI on
> ftgmac100@1e660000 which can only support 1.8V I/O voltage.
> Did you observe the same error on ftgmac100@1e670000 (MAC3) or ftgmac100@1e690000 (MAC4)?
>

Hi Dylan,

Thanks for your review and input, you're correct, this issue is not observed on
AST2600 MAC4 (ftgmac100@1e690000).

Though this issue is caused by using NCSI incompatible MAC ftgmac100@1e660000,
we thought this patch is still having value, by providing an extra option to
user to be able to use ftgmac100@1e660000 for NCSI, and this is also true for
AST2500.

--Hongwei

> > -----Original Message-----
> > From: Linux-aspeed
> > [mailto:[email protected]
> > g]
> > On Behalf Of Joel Stanley
> > Sent: 2020?12?22? 10:26 AM
> > To: Hongwei Zhang <[email protected]>; Ryan Chen
> > <[email protected]>
> > Cc: linux-aspeed <[email protected]>; netdev
> > <[email protected]>; OpenBMC Maillist <[email protected]>;
> > Linux Kernel Mailing List <[email protected]>; Jakub
> > Kicinski <[email protected]>; David S Miller <[email protected]>
> > Subject: Re: [Aspeed, ncsi-rx, v1 0/1] net: ftgmac100: Fix AST2600EVB
> > NCSI RX issue
> >
> > On Mon, 21 Dec 2020 at 17:01, Hongwei Zhang <[email protected]> wrote:
> > >
> > > Dear Reviewer,
> > >
> > > When FTGMAC100 driver is used on other NCSI Ethernet controllers,
> > > few controllers have compatible issue. One example is Intel I210
> > > Ethernet controller on AST2600 BMC, with FTGMAC100 driver, it always
> > > trigger RXDES0_RX_ERR error, cause NCSI initialization failure,
> > > removing FTGMAC100_RXDES0_RX_ERR bit from RXDES0_ANY_ERROR fix the issue.
> >
> > I work with a few systems that use the i210 on the 2600. We haven't
> > seen this issue in our testing.
> >
> > Is there something specific about the setup that you use to trigger this?
> >
> > Ryan, is this an issue that Aspeed is aware of?
> >
> > Cheers,
> >
> > Joel

Hello Joel,

Thanks for your review, please see my response to Dylan, he pointed out
the root cause of the issue.

-- Hongwei

> >
> > >
> > > Here are part of the debug logs:
> > > ......
> > > [ 35.075552] ftgmac100_hard_start_xmit TXDESO=b000003c
> > > [ 35.080843] ftgmac100 1e660000.ethernet eth0: tx_complete_packet 55
> > > [ 35.087141] ftgmac100 1e660000.ethernet eth0: rx_packet_error
> > RXDES0=0xb0070040
> > > [ 37.067831] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
> > > ............
> > >
> > > This patch add a configurable flag, FTGMAC100_RXDES0_RX_ERR_CHK, in
> > > FTGMAC100 driver, it is YES by default, so keep the orignal define
> > > of RXDES0_ANY_ERROR. If it is needed, user can set the flag to NO to
> > > remove the RXDES0_RX_ERR bit, to fix the issue.
> > >
> > > Hongwei Zhang (1):
> > > net: ftgmac100: Fix AST2600 EVB NCSI RX issue
> > >
> > > drivers/net/ethernet/faraday/Kconfig | 9 +++++++++
> > > drivers/net/ethernet/faraday/ftgmac100.h | 8 ++++++++
> > > 2 files changed, 17 insertions(+)
> > >
> > > --
> > > 2.17.1
> > >
>