Hi Prabhakar,
This is an alternative version of your v3, decribing only a single
camera in each .dtsi file, to be included multiple times.
Thanks for your comments!
Lad Prabhakar (2):
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Separate out ov5640 nodes
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add support for 8-bit ov7725
sensors
.../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 155 +++++++++---------
.../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 30 ++++
.../r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi | 27 +++
3 files changed, 134 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi
--
2.25.1
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
From: Lad Prabhakar <[email protected]>
The camera daughter board can also be connected to 8-bit ov7725 sensors,
so in preparation for configurable option to choose depending on the
camera's connected separate out the ov5640 nodes in a dtsi file.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
[geert: describe a single camera in the .dtsi, include multiple times]
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
v4:
- Describe a single camera in the .dtsi file,
- Include the .dtsi multiple times,
.../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 151 +++++++++---------
.../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 30 ++++
2 files changed, 103 insertions(+), 78 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,67 +91,12 @@ &hscif0 {
status = "okay";
};
-&i2c0 {
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam1>;
- clock-names = "xclk";
-
- port {
- ov5640_0: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin0ep>;
- };
- };
- };
-};
-
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <400000>;
-
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam2>;
- clock-names = "xclk";
-
- port {
- ov5640_1: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin1ep>;
- };
- };
- };
-};
-
-&i2c2 {
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam3>;
- clock-names = "xclk";
-
- port {
- ov5640_2: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin2ep>;
- };
- };
- };
};
&i2c3 {
@@ -160,23 +105,6 @@ &i2c3 {
status = "okay";
clock-frequency = <400000>;
-
- ov5640@3c {
- compatible = "ovti,ov5640";
- reg = <0x3c>;
- clocks = <&mclk_cam4>;
- clock-names = "xclk";
-
- port {
- ov5640_3: endpoint {
- bus-width = <8>;
- data-shift = <2>;
- bus-type = <6>;
- pclk-sample = <1>;
- remote-endpoint = <&vin3ep>;
- };
- };
- };
};
&pfc {
@@ -267,6 +195,21 @@ &scifb1 {
cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
};
+/*
+ * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
+ *
+ * Uncomment the #include statements to change configuration
+ */
+
+/* 8bit CMOS Camera 1 (J13) */
+#define CAM_PARENT_I2C i2c0
+#define MCLK_CAM mclk_cam1
+#define CAM_EP cam0ep
+#define VIN_EP vin0ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin0 {
/*
* Set SW2 switch on the SOM to 'ON'
@@ -278,13 +221,28 @@ &vin0 {
port {
vin0ep: endpoint {
- remote-endpoint = <&ov5640_0>;
+ remote-endpoint = <&cam0ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 2 (J14) */
+#define CAM_PARENT_I2C i2c1
+#define MCLK_CAM mclk_cam2
+#define CAM_EP cam1ep
+#define VIN_EP vin1ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin1 {
/* Set SW1 switch on the SOM to 'ON' */
status = "okay";
@@ -293,13 +251,29 @@ &vin1 {
port {
vin1ep: endpoint {
- remote-endpoint = <&ov5640_1>;
+ remote-endpoint = <&cam1ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 3 (J12) */
+#define CAM_PARENT_I2C i2c2
+#define MCLK_CAM mclk_cam3
+#define CAM_EP cam2ep
+#define VIN_EP vin2ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin2 {
status = "okay";
pinctrl-0 = <&vin2_pins>;
@@ -307,14 +281,29 @@ &vin2 {
port {
vin2ep: endpoint {
- remote-endpoint = <&ov5640_2>;
+ remote-endpoint = <&cam2ep>;
bus-width = <8>;
data-shift = <8>;
bus-type = <6>;
};
};
};
-
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
+
+/* 8bit CMOS Camera 4 (J11) */
+#define CAM_PARENT_I2C i2c3
+#define MCLK_CAM mclk_cam4
+#define CAM_EP cam3ep
+#define VIN_EP vin3ep
+#undef CAM_ENABLED
+#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
+
+#ifdef CAM_ENABLED
&vin3 {
status = "okay";
pinctrl-0 = <&vin3_pins>;
@@ -322,9 +311,15 @@ &vin3 {
port {
vin3ep: endpoint {
- remote-endpoint = <&ov5640_3>;
+ remote-endpoint = <&cam3ep>;
bus-width = <8>;
bus-type = <6>;
};
};
};
+#endif /* CAM_ENABLED */
+
+#undef CAM_PARENT_I2C
+#undef MCLK_CAM
+#undef CAM_EP
+#undef VIN_EP
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
new file mode 100644
index 0000000000000000..408016620f5b1a04
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file ties a VIN interface with a single ov5640 sensor on
+ * the iWave-RZ/G1H Qseven board development platform connected with the
+ * camera daughter board.
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#define CAM_ENABLED 1
+
+&CAM_PARENT_I2C {
+ ov5640@3c {
+ compatible = "ovti,ov5640";
+ reg = <0x3c>;
+ clocks = <&MCLK_CAM>;
+ clock-names = "xclk";
+ status = "okay";
+
+ port {
+ CAM_EP: endpoint {
+ bus-width = <8>;
+ data-shift = <2>;
+ bus-type = <6>;
+ pclk-sample = <1>;
+ remote-endpoint = <&VIN_EP>;
+ };
+ };
+ };
+};
--
2.25.1
On Thu, Nov 26, 2020 at 3:20 PM Geert Uytterhoeven <[email protected]> wrote:
> From: Lad Prabhakar <[email protected]>
>
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <[email protected]>
Oops, obviously this should have been [email protected].
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
On Thu, Nov 26, 2020 at 02:40:30PM +0100, Geert Uytterhoeven wrote:
> From: Lad Prabhakar <[email protected]>
>
> The camera daughter board can also be connected to 8-bit ov7725 sensors,
> so in preparation for configurable option to choose depending on the
> camera's connected separate out the ov5640 nodes in a dtsi file.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
> [geert: describe a single camera in the .dtsi, include multiple times]
> Signed-off-by: Geert Uytterhoeven <[email protected]>
> ---
> v4:
> - Describe a single camera in the .dtsi file,
> - Include the .dtsi multiple times,
>
> .../boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts | 151 +++++++++---------
> .../r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi | 30 ++++
> 2 files changed, 103 insertions(+), 78 deletions(-)
> create mode 100644 arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
>
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> index 98c3fbd89fa6c5c7..00634eb58ce39da5 100644
> --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
> @@ -91,67 +91,12 @@ &hscif0 {
> status = "okay";
> };
>
> -&i2c0 {
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam1>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_0: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin0ep>;
> - };
> - };
> - };
> -};
> -
> &i2c1 {
> pinctrl-0 = <&i2c1_pins>;
> pinctrl-names = "default";
>
> status = "okay";
> clock-frequency = <400000>;
i2c1 and i2c3 are here unconditionally enabled, while i2c0 and i2c2
seem to be already enabled and configured already in the included
.dtsi
Wouldn't it be more approriate to enable and configure i2c1 and i2c3
in the r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi only if a camera
is there connected ?
> -
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam2>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_1: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin1ep>;
> - };
> - };
> - };
> -};
> -
> -&i2c2 {
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam3>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_2: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin2ep>;
> - };
> - };
> - };
> };
>
> &i2c3 {
> @@ -160,23 +105,6 @@ &i2c3 {
>
> status = "okay";
> clock-frequency = <400000>;
> -
> - ov5640@3c {
> - compatible = "ovti,ov5640";
> - reg = <0x3c>;
> - clocks = <&mclk_cam4>;
> - clock-names = "xclk";
> -
> - port {
> - ov5640_3: endpoint {
> - bus-width = <8>;
> - data-shift = <2>;
> - bus-type = <6>;
> - pclk-sample = <1>;
> - remote-endpoint = <&vin3ep>;
> - };
> - };
> - };
> };
>
> &pfc {
> @@ -267,6 +195,21 @@ &scifb1 {
> cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
> };
>
> +/*
> + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints
> + *
> + * Uncomment the #include statements to change configuration
> + */
> +
> +/* 8bit CMOS Camera 1 (J13) */
> +#define CAM_PARENT_I2C i2c0
> +#define MCLK_CAM mclk_cam1
> +#define CAM_EP cam0ep
> +#define VIN_EP vin0ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin0 {
> /*
> * Set SW2 switch on the SOM to 'ON'
> @@ -278,13 +221,28 @@ &vin0 {
>
> port {
> vin0ep: endpoint {
> - remote-endpoint = <&ov5640_0>;
> + remote-endpoint = <&cam0ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 2 (J14) */
> +#define CAM_PARENT_I2C i2c1
> +#define MCLK_CAM mclk_cam2
> +#define CAM_EP cam1ep
> +#define VIN_EP vin1ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin1 {
> /* Set SW1 switch on the SOM to 'ON' */
> status = "okay";
> @@ -293,13 +251,29 @@ &vin1 {
>
> port {
> vin1ep: endpoint {
> - remote-endpoint = <&ov5640_1>;
> + remote-endpoint = <&cam1ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
>
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 3 (J12) */
> +#define CAM_PARENT_I2C i2c2
> +#define MCLK_CAM mclk_cam3
> +#define CAM_EP cam2ep
> +#define VIN_EP vin2ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin2 {
> status = "okay";
> pinctrl-0 = <&vin2_pins>;
> @@ -307,14 +281,29 @@ &vin2 {
>
> port {
> vin2ep: endpoint {
> - remote-endpoint = <&ov5640_2>;
> + remote-endpoint = <&cam2ep>;
> bus-width = <8>;
> data-shift = <8>;
> bus-type = <6>;
> };
> };
> };
> -
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> +
> +/* 8bit CMOS Camera 4 (J11) */
> +#define CAM_PARENT_I2C i2c3
> +#define MCLK_CAM mclk_cam4
> +#define CAM_EP cam3ep
> +#define VIN_EP vin3ep
> +#undef CAM_ENABLED
> +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi"
> +
> +#ifdef CAM_ENABLED
> &vin3 {
> status = "okay";
> pinctrl-0 = <&vin3_pins>;
> @@ -322,9 +311,15 @@ &vin3 {
>
> port {
> vin3ep: endpoint {
> - remote-endpoint = <&ov5640_3>;
> + remote-endpoint = <&cam3ep>;
> bus-width = <8>;
> bus-type = <6>;
> };
> };
> };
> +#endif /* CAM_ENABLED */
> +
> +#undef CAM_PARENT_I2C
> +#undef MCLK_CAM
> +#undef CAM_EP
> +#undef VIN_EP
> diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> new file mode 100644
> index 0000000000000000..408016620f5b1a04
> --- /dev/null
> +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * This include file ties a VIN interface with a single ov5640 sensor on
> + * the iWave-RZ/G1H Qseven board development platform connected with the
> + * camera daughter board.
> + *
> + * Copyright (C) 2020 Renesas Electronics Corp.
> + */
> +
> +#define CAM_ENABLED 1
> +
> +&CAM_PARENT_I2C {
> + ov5640@3c {
> + compatible = "ovti,ov5640";
> + reg = <0x3c>;
> + clocks = <&MCLK_CAM>;
> + clock-names = "xclk";
> + status = "okay";
> +
> + port {
> + CAM_EP: endpoint {
> + bus-width = <8>;
> + data-shift = <2>;
> + bus-type = <6>;
> + pclk-sample = <1>;
> + remote-endpoint = <&VIN_EP>;
> + };
> + };
> + };
> +};
> --
> 2.25.1
>