2020-12-17 15:14:55

by Guido Günther

Subject: [PATCH v2 1/4] arm64: defconfig: Enable Librem 5 devkit components

The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
https://source.puri.sm/Librem5/dvk-mx8m-bsb.

This enables drivers for the following hardware components that aren't
yet enabled in defconfig:

- Goodix GT5688 touchscreen
- iMX8MQ's PWM for the LCD backlight
- TI BQ25896 charge controller
- NXP SGTL5000 audio codec
- Microcrystal RV-4162-C7 RTC
- magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
- the SIMCom SIM7100E/A modem

Signed-off-by: Guido Günther <[email protected]>
---
arch/arm64/configs/defconfig | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5fc7f86d62f9..9bdca86bc320 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -417,6 +417,7 @@ CONFIG_KEYBOARD_IMX_SC_KEY=m
CONFIG_KEYBOARD_CROS_EC=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_GOODIX=m
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
@@ -566,6 +567,7 @@ CONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27XXX=y
CONFIG_SENSORS_ARM_SCMI=y
CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=m
CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_LM90=m
@@ -747,6 +749,7 @@ CONFIG_SND_SOC_FSL_ASRC=m
CONFIG_SND_SOC_FSL_MICFIL=m
CONFIG_SND_SOC_FSL_EASRC=m
CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_IMX_SGTL5000=m
CONFIG_SND_SOC_IMX_SPDIF=m
CONFIG_SND_SOC_IMX_AUDMIX=m
CONFIG_SND_MESON_AXG_SOUND_CARD=m
@@ -772,6 +775,7 @@ CONFIG_SND_SOC_TEGRA210_ADMAIF=m
CONFIG_SND_SOC_AK4613=m
CONFIG_SND_SOC_ES7134=m
CONFIG_SND_SOC_ES7241=m
+CONFIG_SND_SOC_GTM601=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_TAS571X=m
@@ -807,6 +811,7 @@ CONFIG_USB_ISP1760=y
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_HSIC_USB3503=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_GADGET=y
@@ -876,6 +881,7 @@ CONFIG_RTC_DRV_HYM8563=m
CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_RK808=m
CONFIG_RTC_DRV_PCF85363=m
+CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RV8803=m
CONFIG_RTC_DRV_S5M=y
@@ -1040,11 +1046,13 @@ CONFIG_IIO_ST_LSM6DSX=m
CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_SENSORS_ISL29018=m
CONFIG_VCNL4000=m
+CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_CROS_EC_BARO=m
CONFIG_MPL3115=m
CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_IMX27=m
CONFIG_PWM_MESON=m
CONFIG_PWM_RCAR=m
CONFIG_PWM_ROCKCHIP=y
--
2.29.2

2020-12-19 12:25:31

by Krzysztof Kozlowski

Subject: Re: [PATCH v2 1/4] arm64: defconfig: Enable Librem 5 devkit components

On Thu, Dec 17, 2020 at 04:13:12PM +0100, Guido Günther wrote:
> The Librem 5 devkit is based on NXP's i.MX8MQ. Schematics are at
> https://source.puri.sm/Librem5/dvk-mx8m-bsb.
>
> This enables drivers for the following hardware components that aren't
> yet enabled in defconfig:
>
> - Goodix GT5688 touchscreen
> - iMX8MQ's PWM for the LCD backlight
> - TI BQ25896 charge controller
> - NXP SGTL5000 audio codec
> - Microcrystal RV-4162-C7 RTC
> - magnetometer: CONFIG_IIO_ST_MAGN_3AXIS
> - the SIMCom SIM7100E/A modem
>
> Signed-off-by: Guido Günther <[email protected]>
> ---
> arch/arm64/configs/defconfig | 8 ++++++++
> 1 file changed, 8 insertions(+)

Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof