This allows the MAX8997 charger to set the current limit depending on
the detected extcon charger type.
Signed-off-by: Timon Baetz <[email protected]>
---
drivers/extcon/extcon-max8997.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c
index 337b0eea4e62..e1408075ef7d 100644
--- a/drivers/extcon/extcon-max8997.c
+++ b/drivers/extcon/extcon-max8997.c
@@ -44,6 +44,8 @@ static struct max8997_muic_irq muic_irqs[] = {
{ MAX8997_MUICIRQ_ChgDetRun, "muic-CHGDETRUN" },
{ MAX8997_MUICIRQ_ChgTyp, "muic-CHGTYP" },
{ MAX8997_MUICIRQ_OVP, "muic-OVP" },
+ { MAX8997_PMICIRQ_CHGINS, "pmic-CHGINS" },
+ { MAX8997_PMICIRQ_CHGRM, "pmic-CHGRM" },
};
/* Define supported cable type */
@@ -538,6 +540,8 @@ static void max8997_muic_irq_work(struct work_struct *work)
case MAX8997_MUICIRQ_DCDTmr:
case MAX8997_MUICIRQ_ChgDetRun:
case MAX8997_MUICIRQ_ChgTyp:
+ case MAX8997_PMICIRQ_CHGINS:
+ case MAX8997_PMICIRQ_CHGRM:
/* Handle charger cable */
ret = max8997_muic_chg_handler(info);
break;
--
2.25.1
Value taken from Galaxy S2 Epic 4G Touch SPH-D710 Android vendor
kernel [0] which always sets 200mA.
Also rearrange regulators based on definition in max8997.h.
[0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/power/sec_battery_u1.c#L1525
Signed-off-by: Timon Baetz <[email protected]>
---
arch/arm/boot/dts/exynos4210-i9100.dts | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 586d801af0b5..e702adb69670 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -560,6 +560,16 @@ safe2_sreg: ESAFEOUT2 {
regulator-boot-on;
};
+ EN32KHZ_AP {
+ regulator-name = "EN32KHZ_AP";
+ regulator-always-on;
+ };
+
+ EN32KHZ_CP {
+ regulator-name = "EN32KHZ_CP";
+ regulator-always-on;
+ };
+
charger_reg: CHARGER {
regulator-name = "CHARGER";
regulator-min-microamp = <200000>;
@@ -573,13 +583,10 @@ chargercv_reg: CHARGER_CV {
regulator-always-on;
};
- EN32KHZ_AP {
- regulator-name = "EN32KHZ_AP";
- regulator-always-on;
- };
-
- EN32KHZ_CP {
- regulator-name = "EN32KHZ_CP";
+ CHARGER_TOPOFF {
+ regulator-name = "CHARGER_TOPOFF";
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
regulator-always-on;
};
};
--
2.25.1
Set CHARGER current and CHARGER_CV voltage according to Galaxy S2 Epic
4G Touch SPH-D710 Android vendor sources [0,1].
Remove regulator-always-on. The regulator can be enabled and disabled
based on extcon events.
[0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/power/max8997_charger_u1.c#L169-L170
[1] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/power/max8997_charger_u1.c#L390-L391
Signed-off-by: Timon Baetz <[email protected]>
---
arch/arm/boot/dts/exynos4210-i9100.dts | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 8fa704babd5e..586d801af0b5 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -562,15 +562,14 @@ safe2_sreg: ESAFEOUT2 {
charger_reg: CHARGER {
regulator-name = "CHARGER";
- regulator-min-microamp = <60000>;
- regulator-max-microamp = <2580000>;
- regulator-always-on;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <950000>;
};
chargercv_reg: CHARGER_CV {
regulator-name = "CHARGER_CV";
- regulator-min-microvolt = <3800000>;
- regulator-max-microvolt = <4100000>;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
regulator-always-on;
};
--
2.25.1