This is my very crude attempt at adding support for Longsys'
Foresee branded SPI NAND parts that are showing up on some
boards.
I fully admit I have no idea what I'm doing here and I basically
took one of the existing files, ripped out what I didn't
understand and tried to fill in the numbers from the datasheet
without really knowing what they mean.
This worked well enough for me to get something that looks like
a correct dump of the SPI NAND from a board I'm working with.
I need the vendor firmware on the board for reverse engineering
so I haven't actually tried to write anything yet.
The datasheet for this chip is linked. If someone that actually
knows what they're doing could take a look and point out my
mistakes that would be great.
Link: https://datasheet.lcsc.com/szlcsc/2008121142_FORESEE-FS35ND01G-S1Y2QWFI000_C719495.pdf
Daniel Palmer (1):
mtd: spinand: add support for Foresee FS35ND01G
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/longsys.c | 45 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 1 +
4 files changed, 48 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/spi/longsys.c
--
2.30.0.rc2