A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
macb_set_tx_clk were gated on the presence of this flag.
- if (!clk)
+ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
However the flag was not added to anything other than the new
sama7g5_gem, turning that function call into a no op for all other
systems. This breaks the networking on Zynq.
The commit message adding this states: a new capability so that
macb_set_tx_clock() to not be called for IPs having this
capability
This strongly implies that present of the flag was intended to skip
the function not absence of the flag. Update the if statement to
this effect, which repairs the existing users.
Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Charles Keepax <[email protected]>
---
Changes since v1:
- Updated flag semantics to skip function, as appears to have been
intended by the initial commit.
Changes since v2:
- Adding "net" to the subject line
Thanks,
Charles
drivers/net/ethernet/cadence/macb_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index d5d910916c2e8..814a5b10141d1 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -467,7 +467,7 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
{
long ferr, rate, rate_rounded;
- if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
+ if (!bp->tx_clk || (bp->caps & MACB_CAPS_CLK_HW_CHG))
return;
switch (speed) {
--
2.11.0
Hi Charles,
On 04.01.2021 12:38, Charles Keepax wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
> macb_set_tx_clk were gated on the presence of this flag.
>
> - if (!clk)
> + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
>
> However the flag was not added to anything other than the new
> sama7g5_gem, turning that function call into a no op for all other
> systems. This breaks the networking on Zynq.
>
> The commit message adding this states: a new capability so that
> macb_set_tx_clock() to not be called for IPs having this
> capability
>
> This strongly implies that present of the flag was intended to skip
> the function not absence of the flag. Update the if statement to
> this effect, which repairs the existing users.
Yes, the presence of the flag should involve skipping the calling of
clk_set_rate() since the IP logic would take care of proper clock division
depending on the link speed. I wrongly cherry pick this one from internal
branches. Sorry for this breakage.
>
> Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
> Suggested-by: Andrew Lunn <[email protected]>
> Signed-off-by: Charles Keepax <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
> ---
>
> Changes since v1:
> - Updated flag semantics to skip function, as appears to have been
> intended by the initial commit.
>
> Changes since v2:
> - Adding "net" to the subject line
>
> Thanks,
> Charles
>
> drivers/net/ethernet/cadence/macb_main.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index d5d910916c2e8..814a5b10141d1 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -467,7 +467,7 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
> {
> long ferr, rate, rate_rounded;
>
> - if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
> + if (!bp->tx_clk || (bp->caps & MACB_CAPS_CLK_HW_CHG))
> return;
>
> switch (speed) {
> --
> 2.11.0
>
On Mon, Jan 04, 2021 at 10:38:02AM +0000, Charles Keepax wrote:
> A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
> macb_set_tx_clk were gated on the presence of this flag.
>
> - if (!clk)
> + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
>
> However the flag was not added to anything other than the new
> sama7g5_gem, turning that function call into a no op for all other
> systems. This breaks the networking on Zynq.
>
> The commit message adding this states: a new capability so that
> macb_set_tx_clock() to not be called for IPs having this
> capability
>
> This strongly implies that present of the flag was intended to skip
> the function not absence of the flag. Update the if statement to
> this effect, which repairs the existing users.
>
> Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
> Suggested-by: Andrew Lunn <[email protected]>
> Signed-off-by: Charles Keepax <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Mon, 4 Jan 2021 15:18:50 +0100 Andrew Lunn wrote:
> On Mon, Jan 04, 2021 at 10:38:02AM +0000, Charles Keepax wrote:
> > A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
> > macb_set_tx_clk were gated on the presence of this flag.
> >
> > - if (!clk)
> > + if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
> >
> > However the flag was not added to anything other than the new
> > sama7g5_gem, turning that function call into a no op for all other
> > systems. This breaks the networking on Zynq.
> >
> > The commit message adding this states: a new capability so that
> > macb_set_tx_clock() to not be called for IPs having this
> > capability
> >
> > This strongly implies that present of the flag was intended to skip
> > the function not absence of the flag. Update the if statement to
> > this effect, which repairs the existing users.
> >
> > Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
> > Suggested-by: Andrew Lunn <[email protected]>
> > Signed-off-by: Charles Keepax <[email protected]>
>
> Reviewed-by: Andrew Lunn <[email protected]>
Applied, thanks!