With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
type of the macros are enforced to 'unsigned long int' via the _BITUL()
macro.
This causes some -Wformat warnings in the spi-stm32 driver.
This patch changes the printf() specifiers from '%d' to '%lu' to
accommodate for this change.
Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header")
Reported-by: Stephen Rothwell <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
---
drivers/spi/spi-stm32.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 6017209c6d2f..47fd35acb651 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1027,7 +1027,7 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
else
clrb |= spi->cfg->regs->lsb_first.mask;
- dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
+ dev_dbg(spi->dev, "cpol=%lu cpha=%lu lsb_first=%lu cs_high=%lu\n",
spi_dev->mode & SPI_CPOL,
spi_dev->mode & SPI_CPHA,
spi_dev->mode & SPI_LSB_FIRST,
--
2.17.1
On Mon, Jan 4, 2021 at 10:55 AM Alexandru Ardelean
<[email protected]> wrote:
>
> With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
> type of the macros are enforced to 'unsigned long int' via the _BITUL()
> macro.
>
> This causes some -Wformat warnings in the spi-stm32 driver.
> This patch changes the printf() specifiers from '%d' to '%lu' to
> accommodate for this change.
>
> Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header")
> Reported-by: Stephen Rothwell <[email protected]>
LKP also reported this before.
...
> - dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
> + dev_dbg(spi->dev, "cpol=%lu cpha=%lu lsb_first=%lu cs_high=%lu\n",
> spi_dev->mode & SPI_CPOL,
> spi_dev->mode & SPI_CPHA,
> spi_dev->mode & SPI_LSB_FIRST,
Wouldn't the output be a bit awful with all these?
I think the proper fix is to add !! to each bit mask.
--
With Best Regards,
Andy Shevchenko
> -----Original Message-----
> From: Andy Shevchenko <[email protected]>
> Sent: Monday, January 4, 2021 3:51 PM
> To: Ardelean, Alexandru <[email protected]>
> Cc: linux-spi <[email protected]>; Linux Kernel Mailing List <linux-
> [email protected]>; Mark Brown <[email protected]>; Stephen Rothwell
> <[email protected]>
> Subject: Re: [PATCH] spi: stm32: update dev_dbg() print format for SPI params
>
> [External]
>
> On Mon, Jan 4, 2021 at 10:55 AM Alexandru Ardelean
> <[email protected]> wrote:
> >
> > With the introduction of the 'include/uapi/linux/spi/spi.h' header,
> > the type of the macros are enforced to 'unsigned long int' via the
> > _BITUL() macro.
> >
> > This causes some -Wformat warnings in the spi-stm32 driver.
> > This patch changes the printf() specifiers from '%d' to '%lu' to
> > accommodate for this change.
> >
> > Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h
> > header")
> > Reported-by: Stephen Rothwell <[email protected]>
>
> LKP also reported this before.
>
Ack;
Will add it
> ...
>
> > - dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
> > + dev_dbg(spi->dev, "cpol=%lu cpha=%lu lsb_first=%lu
> > + cs_high=%lu\n",
> > spi_dev->mode & SPI_CPOL,
> > spi_dev->mode & SPI_CPHA,
> > spi_dev->mode & SPI_LSB_FIRST,
>
> Wouldn't the output be a bit awful with all these?
>
> I think the proper fix is to add !! to each bit mask.
Fine by me
>
> --
> With Best Regards,
> Andy Shevchenko
With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
type of the macros are enforced to 'unsigned long int' via the _BITUL()
macro.
This causes some -Wformat warnings in the spi-stm32 driver.
This patch adds a double-negation operator to the bit-masks. Essentially,
the important values for debugging are 0 or 1, while masking them directly
would show 0 or BIT(x) values.
This way, the type of the arguments are automatically re-cast.
Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header")
Reported-by: kernel test robot <[email protected]>
Reported-by: Stephen Rothwell <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Signed-off-by: Alexandru Ardelean <[email protected]>
---
Changelog v1 -> v2:
* revert to using '%d' specifiers
* add !! operatior to bit-masking; this way the types are automatically
re-cast
* add 'Reported-by: kernel test robot <[email protected]>'
drivers/spi/spi-stm32.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
index 6017209c6d2f..be0fb169d7a7 100644
--- a/drivers/spi/spi-stm32.c
+++ b/drivers/spi/spi-stm32.c
@@ -1028,10 +1028,10 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
clrb |= spi->cfg->regs->lsb_first.mask;
dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
- spi_dev->mode & SPI_CPOL,
- spi_dev->mode & SPI_CPHA,
- spi_dev->mode & SPI_LSB_FIRST,
- spi_dev->mode & SPI_CS_HIGH);
+ !!(spi_dev->mode & SPI_CPOL),
+ !!(spi_dev->mode & SPI_CPHA),
+ !!(spi_dev->mode & SPI_LSB_FIRST),
+ !!(spi_dev->mode & SPI_CS_HIGH));
spin_lock_irqsave(&spi->lock, flags);
--
2.17.1
On Mon, Jan 4, 2021 at 4:27 PM Alexandru Ardelean
<[email protected]> wrote:
>
> With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
> type of the macros are enforced to 'unsigned long int' via the _BITUL()
> macro.
>
> This causes some -Wformat warnings in the spi-stm32 driver.
> This patch adds a double-negation operator to the bit-masks. Essentially,
> the important values for debugging are 0 or 1, while masking them directly
> would show 0 or BIT(x) values.
> This way, the type of the arguments are automatically re-cast.
Thanks!
Reviewed-by: Andy Shevchenko <[email protected]>
> Fixes: f7005142dace ("spi: uapi: unify SPI modes into a single spi.h header")
> Reported-by: kernel test robot <[email protected]>
> Reported-by: Stephen Rothwell <[email protected]>
> Cc: Andy Shevchenko <[email protected]>
> Signed-off-by: Alexandru Ardelean <[email protected]>
> ---
>
> Changelog v1 -> v2:
> * revert to using '%d' specifiers
> * add !! operatior to bit-masking; this way the types are automatically
> re-cast
> * add 'Reported-by: kernel test robot <[email protected]>'
>
> drivers/spi/spi-stm32.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c
> index 6017209c6d2f..be0fb169d7a7 100644
> --- a/drivers/spi/spi-stm32.c
> +++ b/drivers/spi/spi-stm32.c
> @@ -1028,10 +1028,10 @@ static int stm32_spi_prepare_msg(struct spi_master *master,
> clrb |= spi->cfg->regs->lsb_first.mask;
>
> dev_dbg(spi->dev, "cpol=%d cpha=%d lsb_first=%d cs_high=%d\n",
> - spi_dev->mode & SPI_CPOL,
> - spi_dev->mode & SPI_CPHA,
> - spi_dev->mode & SPI_LSB_FIRST,
> - spi_dev->mode & SPI_CS_HIGH);
> + !!(spi_dev->mode & SPI_CPOL),
> + !!(spi_dev->mode & SPI_CPHA),
> + !!(spi_dev->mode & SPI_LSB_FIRST),
> + !!(spi_dev->mode & SPI_CS_HIGH));
>
> spin_lock_irqsave(&spi->lock, flags);
>
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
On Mon, 4 Jan 2021 16:31:03 +0200, Alexandru Ardelean wrote:
> With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
> type of the macros are enforced to 'unsigned long int' via the _BITUL()
> macro.
>
> This causes some -Wformat warnings in the spi-stm32 driver.
> This patch adds a double-negation operator to the bit-masks. Essentially,
> the important values for debugging are 0 or 1, while masking them directly
> would show 0 or BIT(x) values.
> This way, the type of the arguments are automatically re-cast.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: stm32: update dev_dbg() print format for SPI params
commit: 8b835da61774d4482864bc081dfb428104842ad3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
On Mon, 4 Jan 2021 10:59:23 +0200, Alexandru Ardelean wrote:
> With the introduction of the 'include/uapi/linux/spi/spi.h' header, the
> type of the macros are enforced to 'unsigned long int' via the _BITUL()
> macro.
>
> This causes some -Wformat warnings in the spi-stm32 driver.
> This patch changes the printf() specifiers from '%d' to '%lu' to
> accommodate for this change.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: stm32: update dev_dbg() print format for SPI params
commit: 8b835da61774d4482864bc081dfb428104842ad3
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark