If the iova is 34bit, the iova[32][33] is the bit0/1 in the tlb flush
register. Add a new macro for this.
In the macro, since (iova + size - 1) may be end with 0xfff, then the
bit0/1 always is 1, thus add a mask.
Signed-off-by: Yong Wu <[email protected]>
---
drivers/iommu/mtk_iommu.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index b9c63c8de33e..468be7ca62e4 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -129,6 +129,11 @@ static const struct iommu_ops mtk_iommu_ops;
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data);
+#define MTK_IOMMU_TLB_ADDR(iova) ({ \
+ dma_addr_t _addr = iova; \
+ ((lower_32_bits(_addr) & GENMASK(31, 12)) | upper_32_bits(_addr));\
+})
+
/*
* In M4U 4GB mode, the physical address is remapped as below:
*
@@ -213,8 +218,9 @@ static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
data->base + data->plat_data->inv_sel_reg);
- writel_relaxed(iova, data->base + REG_MMU_INVLD_START_A);
- writel_relaxed(iova + size - 1,
+ writel_relaxed(MTK_IOMMU_TLB_ADDR(iova),
+ data->base + REG_MMU_INVLD_START_A);
+ writel_relaxed(MTK_IOMMU_TLB_ADDR(iova + size - 1),
data->base + REG_MMU_INVLD_END_A);
writel_relaxed(F_MMU_INV_RANGE,
data->base + REG_MMU_INVALIDATE);
--
2.18.0