The iommu_map_sg() code currently iterates through the given
scatter-gather list, and in the worst case, invokes iommu_map()
for each element in the scatter-gather list, which calls into
the IOMMU driver through an indirect call. For an IOMMU driver
that uses a format supported by the io-pgtable code, the IOMMU
driver will then call into the io-pgtable code to map the chunk.
Jumping between the IOMMU core code, the IOMMU driver, and the
io-pgtable code and back for each element in a scatter-gather list
is not efficient.
Instead, add a map_sg() hook in both the IOMMU driver ops and the
io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
map_sg() hook with the entire scatter-gather list, which can call
into the io-pgtable map_sg() hook, which can process the entire
scatter-gather list, signficantly reducing the number of indirect
calls, and jumps between these layers, boosting performance.
On a system that uses the ARM SMMU driver, and the ARM LPAE format,
the current implementation of iommu_map_sg() yields the following
latencies for mapping scatter-gather lists of various sizes. These
latencies are calculated by repeating the mapping operation 10 times:
size iommu_map_sg latency
4K 0.624 us
64K 9.468 us
1M 122.557 us
2M 239.807 us
12M 1435.979 us
24M 2884.968 us
32M 3832.979 us
On the same system, the proposed modifications yield the following
results:
size iommu_map_sg latency
4K 3.645 us
64K 4.198 us
1M 11.010 us
2M 17.125 us
12M 82.416 us
24M 158.677 us
32M 210.468 us
The procedure for collecting the iommu_map_sg latencies is
the same in both experiments. Clearly, reducing the jumps
between the different layers in the IOMMU code offers a
signficant performance boost in iommu_map_sg() latency.
Changes since v1:
-Fixed an off by one error in arm_[lpae/v7s]_map_by_pgsize
when checking if the IOVA and physical address ranges being
mapped are within the appropriate limits.
-Added Sai Prakash Ranjan's "Tested-by" tag.
Thanks,
Isaac
Isaac J. Manjarres (5):
iommu/io-pgtable: Introduce map_sg() as a page table op
iommu/io-pgtable-arm: Hook up map_sg()
iommu/io-pgtable-arm-v7s: Hook up map_sg()
iommu: Introduce map_sg() as an IOMMU op for IOMMU drivers
iommu/arm-smmu: Hook up map_sg()
drivers/iommu/arm/arm-smmu/arm-smmu.c | 19 ++++++++
drivers/iommu/io-pgtable-arm-v7s.c | 90 +++++++++++++++++++++++++++++++++++
drivers/iommu/io-pgtable-arm.c | 86 +++++++++++++++++++++++++++++++++
drivers/iommu/iommu.c | 25 ++++++++--
include/linux/io-pgtable.h | 6 +++
include/linux/iommu.h | 13 +++++
6 files changed, 234 insertions(+), 5 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
On 2021-01-11 14:54, Isaac J. Manjarres wrote:
> The iommu_map_sg() code currently iterates through the given
> scatter-gather list, and in the worst case, invokes iommu_map()
> for each element in the scatter-gather list, which calls into
> the IOMMU driver through an indirect call. For an IOMMU driver
> that uses a format supported by the io-pgtable code, the IOMMU
> driver will then call into the io-pgtable code to map the chunk.
>
> Jumping between the IOMMU core code, the IOMMU driver, and the
> io-pgtable code and back for each element in a scatter-gather list
> is not efficient.
>
> Instead, add a map_sg() hook in both the IOMMU driver ops and the
> io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
> map_sg() hook with the entire scatter-gather list, which can call
> into the io-pgtable map_sg() hook, which can process the entire
> scatter-gather list, signficantly reducing the number of indirect
> calls, and jumps between these layers, boosting performance.
Out of curiosity, how much of the difference is attributable to actual
indirect call overhead vs. the additional massive reduction in visits to
arm_smmu_rpm_{get,put} that you fail to mention? There are ways to
optimise indirect calling that would benefit *all* cases, rather than
just one operation for one particular driver.
> On a system that uses the ARM SMMU driver, and the ARM LPAE format,
> the current implementation of iommu_map_sg() yields the following
> latencies for mapping scatter-gather lists of various sizes. These
> latencies are calculated by repeating the mapping operation 10 times:
>
> size iommu_map_sg latency
> 4K 0.624 us
> 64K 9.468 us
> 1M 122.557 us
> 2M 239.807 us
> 12M 1435.979 us
> 24M 2884.968 us
> 32M 3832.979 us
>
> On the same system, the proposed modifications yield the following
> results:
>
> size iommu_map_sg latency
> 4K 3.645 us
> 64K 4.198 us
> 1M 11.010 us
> 2M 17.125 us
> 12M 82.416 us
> 24M 158.677 us
> 32M 210.468 us
>
> The procedure for collecting the iommu_map_sg latencies is
> the same in both experiments. Clearly, reducing the jumps
> between the different layers in the IOMMU code offers a
> signficant performance boost in iommu_map_sg() latency.
Presumably those are deliberately worst-case numbers? After all, a 32MB
scatterlist *could* incur less overhead than a 64KB one if things line
up just right (still 16 ->map calls, but each with one fewer level of
pagetable to traverse). TBH I find the significant regression of the 4KB
case the most interesting - what's going on there?
My main reservation here is that we get an explosion of duplicate copies
of almost the same code, and it's code that's just non-trivial enough to
start being bug-prone. And it's all still only for one specific
operation - your argument about calling through multiple layers for each
element applies just as much to iommu_map() itself, so why aren't we
trying to make more fundamental improvements with wider benefits? Indeed
I can't imagine the existing iommu_map_sg() loop really adds significant
overhead compared to a single iommu_map() call that results in the
equivalent set of ->map calls to the driver.
At a glance, I reckon that simply extending the internal ->map and
->unmap interfaces to encode a number of consecutive identical pages
would already get us a large chunk of the way there; then we'd be in a
better place to consider options for the io-pgtable interface.
Robin.
> Changes since v1:
>
> -Fixed an off by one error in arm_[lpae/v7s]_map_by_pgsize
> when checking if the IOVA and physical address ranges being
> mapped are within the appropriate limits.
> -Added Sai Prakash Ranjan's "Tested-by" tag.
>
> Thanks,
> Isaac
>
> Isaac J. Manjarres (5):
> iommu/io-pgtable: Introduce map_sg() as a page table op
> iommu/io-pgtable-arm: Hook up map_sg()
> iommu/io-pgtable-arm-v7s: Hook up map_sg()
> iommu: Introduce map_sg() as an IOMMU op for IOMMU drivers
> iommu/arm-smmu: Hook up map_sg()
>
> drivers/iommu/arm/arm-smmu/arm-smmu.c | 19 ++++++++
> drivers/iommu/io-pgtable-arm-v7s.c | 90 +++++++++++++++++++++++++++++++++++
> drivers/iommu/io-pgtable-arm.c | 86 +++++++++++++++++++++++++++++++++
> drivers/iommu/iommu.c | 25 ++++++++--
> include/linux/io-pgtable.h | 6 +++
> include/linux/iommu.h | 13 +++++
> 6 files changed, 234 insertions(+), 5 deletions(-)
>
On Tue, Jan 12, 2021 at 04:00:59PM +0000, Robin Murphy wrote:
> Out of curiosity, how much of the difference is attributable to actual
> indirect call overhead vs. the additional massive reduction in visits to
> arm_smmu_rpm_{get,put} that you fail to mention? There are ways to optimise
> indirect calling that would benefit *all* cases, rather than just one
> operation for one particular driver.
Do we have systems that use different iommu_ops at the same time?
If not this would be a prime candidate for static call optimizations.
Also I've been pondering adding direct calls to the iommu dma ops like
we do for DMA direct. This would allow to stop using dma_ops entirely
for arm64.
On 2021-01-12 16:33, Christoph Hellwig wrote:
> On Tue, Jan 12, 2021 at 04:00:59PM +0000, Robin Murphy wrote:
>> Out of curiosity, how much of the difference is attributable to actual
>> indirect call overhead vs. the additional massive reduction in visits to
>> arm_smmu_rpm_{get,put} that you fail to mention? There are ways to optimise
>> indirect calling that would benefit *all* cases, rather than just one
>> operation for one particular driver.
>
> Do we have systems that use different iommu_ops at the same time?
> If not this would be a prime candidate for static call optimizations.
They're not at all common, but such systems do technically exist. It's
hard to make them work in the current "one set of ops per bus" model,
but I still have a long-term dream of sorting that out so such setups
*can* be supported properly. I certainly wouldn't want to make any
changes that completely close the door on that idea, but any static call
optimisation that can be done in a config-gated manner should be viable
for x86 at least. Even better if we could do it with a dynamic
branch-patching solution that keeps the indirect case as a fallback;
AFAICS that should be feasible to eagerly apply somewhere around
iommu_device_register(), then just undo again if another driver ever
does show up registering a new set of ops that don't match. I'm pretty
confident that the systems where performance matters most are going to
be sensible homogeneous ones - on the Arm side the SBSA should see to
that. The weird mix-and-match cases are typically going to be FPGA
prototyping systems and esoteric embedded stuff that are worlds away
from worrying about keeping up with line rate on a 40GbE NIC...
> Also I've been pondering adding direct calls to the iommu dma ops like
> we do for DMA direct. This would allow to stop using dma_ops entirely
> for arm64.
Yes, now that we're starting to get things sufficiently consolidated
behind iommu-dma that might be a reasonable thing to try, although given
the amount of inherent work further down in the IOVA and IOMMU layers
that dwarfs that of the direct case, I doubt that reducing the initial
dispatch overhead would make any noticeable difference in practice.
Robin.
On 2021-01-12 08:00, Robin Murphy wrote:
> On 2021-01-11 14:54, Isaac J. Manjarres wrote:
>> The iommu_map_sg() code currently iterates through the given
>> scatter-gather list, and in the worst case, invokes iommu_map()
>> for each element in the scatter-gather list, which calls into
>> the IOMMU driver through an indirect call. For an IOMMU driver
>> that uses a format supported by the io-pgtable code, the IOMMU
>> driver will then call into the io-pgtable code to map the chunk.
>>
>> Jumping between the IOMMU core code, the IOMMU driver, and the
>> io-pgtable code and back for each element in a scatter-gather list
>> is not efficient.
>>
>> Instead, add a map_sg() hook in both the IOMMU driver ops and the
>> io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
>> map_sg() hook with the entire scatter-gather list, which can call
>> into the io-pgtable map_sg() hook, which can process the entire
>> scatter-gather list, signficantly reducing the number of indirect
>> calls, and jumps between these layers, boosting performance.
>
> Out of curiosity, how much of the difference is attributable to actual
> indirect call overhead vs. the additional massive reduction in visits
> to arm_smmu_rpm_{get,put} that you fail to mention?There are ways to
I did an experiment where I compared the two approaches without any
calls
to arm_smmu_rpm_[get/put]. There's still a large amount of difference
without the overhead incurred by power management calls. Here are the
results:
no optimizations and no power management calls:
size iommu_map_sg
4K 0.609 us
64K 8.583 us
1M 136.083 us
2M 273.145 us
12M 1442.119 us
24M 2876.078 us
32M 3832.041 us
iommu_map_sg optimizations and no power management calls:
size iommu_map_sg
4K 0.645 us
64K 1.229 us
1M 9.531 us
2M 23.198 us
12M 99.250 us
24M 185.713 us
32M 248.781 us
From here, we can see that the amount of latency incurred by the
indirect
calls is fairly large.
> optimise indirect calling that would benefit *all* cases, rather than
> just one operation for one particular driver.
Do you mind sharing some more information on how to optimize the
existing
approach further, such that it benefits other drivers as well?
>
>> On a system that uses the ARM SMMU driver, and the ARM LPAE format,
>> the current implementation of iommu_map_sg() yields the following
>> latencies for mapping scatter-gather lists of various sizes. These
>> latencies are calculated by repeating the mapping operation 10 times:
>>
>> size iommu_map_sg latency
>> 4K 0.624 us
>> 64K 9.468 us
>> 1M 122.557 us
>> 2M 239.807 us
>> 12M 1435.979 us
>> 24M 2884.968 us
>> 32M 3832.979 us
>>
>> On the same system, the proposed modifications yield the following
>> results:
>>
>> size iommu_map_sg latency
>> 4K 3.645 us
>> 64K 4.198 us
>> 1M 11.010 us
>> 2M 17.125 us
>> 12M 82.416 us
>> 24M 158.677 us
>> 32M 210.468 us
>>
>> The procedure for collecting the iommu_map_sg latencies is
>> the same in both experiments. Clearly, reducing the jumps
>> between the different layers in the IOMMU code offers a
>> signficant performance boost in iommu_map_sg() latency.
>
> Presumably those are deliberately worst-case numbers? After all, a
> 32MB scatterlist *could* incur less overhead than a 64KB one if things
> line up just right (still 16 ->map calls, but each with one fewer
Yes, these are worst case numbers (i.e. a buffer is composed entirely
of 4 KB pages, so higher order mappings don't get used).
> level of pagetable to traverse). TBH I find the significant regression
> of the 4KB case the most interesting - what's going on there?
That was an error on my part. After fixing my error, I observed that the
time spent mapping the 4 KB buffer is comparable with and without
optimizations,
which is expected.
>
> My main reservation here is that we get an explosion of duplicate
> copies of almost the same code, and it's code that's just non-trivial
> enough to start being bug-prone. And it's all still only for one
> specific operation - your argument about calling through multiple
> layers for each element applies just as much to iommu_map() itself, so
> why aren't we trying to make more fundamental improvements with wider
> benefits? Indeed I can't imagine the existing iommu_map_sg() loop
> really adds significant overhead compared to a single iommu_map() call
> that results in the equivalent set of ->map calls to the driver.
>
> At a glance, I reckon that simply extending the internal ->map and
> ->unmap interfaces to encode a number of consecutive identical pages
> would already get us a large chunk of the way there; then we'd be in a
> better place to consider options for the io-pgtable interface.
>
Do you mean physically contiguous pages? If so, that still wouldn't help
the
case where a buffer is composed entirely of 4 KB pages, correct?
> Robin.
>
>> Changes since v1:
>>
>> -Fixed an off by one error in arm_[lpae/v7s]_map_by_pgsize
>> when checking if the IOVA and physical address ranges being
>> mapped are within the appropriate limits.
>> -Added Sai Prakash Ranjan's "Tested-by" tag.
>>
>> Thanks,
>> Isaac
>>
>> Isaac J. Manjarres (5):
>> iommu/io-pgtable: Introduce map_sg() as a page table op
>> iommu/io-pgtable-arm: Hook up map_sg()
>> iommu/io-pgtable-arm-v7s: Hook up map_sg()
>> iommu: Introduce map_sg() as an IOMMU op for IOMMU drivers
>> iommu/arm-smmu: Hook up map_sg()
>>
>> drivers/iommu/arm/arm-smmu/arm-smmu.c | 19 ++++++++
>> drivers/iommu/io-pgtable-arm-v7s.c | 90
>> +++++++++++++++++++++++++++++++++++
>> drivers/iommu/io-pgtable-arm.c | 86
>> +++++++++++++++++++++++++++++++++
>> drivers/iommu/iommu.c | 25 ++++++++--
>> include/linux/io-pgtable.h | 6 +++
>> include/linux/iommu.h | 13 +++++
>> 6 files changed, 234 insertions(+), 5 deletions(-)
>>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 2021-01-21 21:30, [email protected] wrote:
> On 2021-01-12 08:00, Robin Murphy wrote:
>> On 2021-01-11 14:54, Isaac J. Manjarres wrote:
>>> The iommu_map_sg() code currently iterates through the given
>>> scatter-gather list, and in the worst case, invokes iommu_map()
>>> for each element in the scatter-gather list, which calls into
>>> the IOMMU driver through an indirect call. For an IOMMU driver
>>> that uses a format supported by the io-pgtable code, the IOMMU
>>> driver will then call into the io-pgtable code to map the chunk.
>>>
>>> Jumping between the IOMMU core code, the IOMMU driver, and the
>>> io-pgtable code and back for each element in a scatter-gather list
>>> is not efficient.
>>>
>>> Instead, add a map_sg() hook in both the IOMMU driver ops and the
>>> io-pgtable ops. iommu_map_sg() can then call into the IOMMU driver's
>>> map_sg() hook with the entire scatter-gather list, which can call
>>> into the io-pgtable map_sg() hook, which can process the entire
>>> scatter-gather list, signficantly reducing the number of indirect
>>> calls, and jumps between these layers, boosting performance.
>>
>> Out of curiosity, how much of the difference is attributable to actual
>> indirect call overhead vs. the additional massive reduction in visits
>> to arm_smmu_rpm_{get,put} that you fail to mention?There are ways to
> I did an experiment where I compared the two approaches without any calls
> to arm_smmu_rpm_[get/put]. There's still a large amount of difference
> without the overhead incurred by power management calls. Here are the
> results:
>
> no optimizations and no power management calls:
> size iommu_map_sg
> 4K 0.609 us
> 64K 8.583 us
> 1M 136.083 us
> 2M 273.145 us
> 12M 1442.119 us
> 24M 2876.078 us
> 32M 3832.041 us
>
> iommu_map_sg optimizations and no power management calls:
> size iommu_map_sg
> 4K 0.645 us
> 64K 1.229 us
> 1M 9.531 us
> 2M 23.198 us
> 12M 99.250 us
> 24M 185.713 us
> 32M 248.781 us
>
> From here, we can see that the amount of latency incurred by the indirect
> calls is fairly large.
OK, that's pretty much in line with what I was imagining, just wanted to
confirm (if you ended up actually changing the power state around each
page then the caller would likely be doing something very stupid).
I'm guessing the optimised numbers above looking ~20% slower than the
ones below is just indicative of a high variance between runs, or maybe
there's some funky cache interaction that really does make the RPM
checks have effectively negative overhead.
>> optimise indirect calling that would benefit *all* cases, rather than
>> just one operation for one particular driver.
> Do you mind sharing some more information on how to optimize the existing
> approach further, such that it benefits other drivers as well?
This article touches on some of the possible techniques:
https://lwn.net/Articles/774743/
>>> On a system that uses the ARM SMMU driver, and the ARM LPAE format,
>>> the current implementation of iommu_map_sg() yields the following
>>> latencies for mapping scatter-gather lists of various sizes. These
>>> latencies are calculated by repeating the mapping operation 10 times:
>>>
>>> size iommu_map_sg latency
>>> 4K 0.624 us
>>> 64K 9.468 us
>>> 1M 122.557 us
>>> 2M 239.807 us
>>> 12M 1435.979 us
>>> 24M 2884.968 us
>>> 32M 3832.979 us
>>>
>>> On the same system, the proposed modifications yield the following
>>> results:
>>>
>>> size iommu_map_sg latency
>>> 4K 3.645 us
>>> 64K 4.198 us
>>> 1M 11.010 us
>>> 2M 17.125 us
>>> 12M 82.416 us
>>> 24M 158.677 us
>>> 32M 210.468 us
>>>
>>> The procedure for collecting the iommu_map_sg latencies is
>>> the same in both experiments. Clearly, reducing the jumps
>>> between the different layers in the IOMMU code offers a
>>> signficant performance boost in iommu_map_sg() latency.
>>
>> Presumably those are deliberately worst-case numbers? After all, a
>> 32MB scatterlist *could* incur less overhead than a 64KB one if things
>> line up just right (still 16 ->map calls, but each with one fewer
> Yes, these are worst case numbers (i.e. a buffer is composed entirely
> of 4 KB pages, so higher order mappings don't get used).
>> level of pagetable to traverse). TBH I find the significant regression
>> of the 4KB case the most interesting - what's going on there?
> That was an error on my part. After fixing my error, I observed that the
> time spent mapping the 4 KB buffer is comparable with and without
> optimizations,
> which is expected.
>>
>> My main reservation here is that we get an explosion of duplicate
>> copies of almost the same code, and it's code that's just non-trivial
>> enough to start being bug-prone. And it's all still only for one
>> specific operation - your argument about calling through multiple
>> layers for each element applies just as much to iommu_map() itself, so
>> why aren't we trying to make more fundamental improvements with wider
>> benefits? Indeed I can't imagine the existing iommu_map_sg() loop
>> really adds significant overhead compared to a single iommu_map() call
>> that results in the equivalent set of ->map calls to the driver.
>>
>> At a glance, I reckon that simply extending the internal ->map and
>> ->unmap interfaces to encode a number of consecutive identical pages
>> would already get us a large chunk of the way there; then we'd be in a
>> better place to consider options for the io-pgtable interface.
>>
> Do you mean physically contiguous pages? If so, that still wouldn't help
> the
> case where a buffer is composed entirely of 4 KB pages, correct?
Indeed, simply reducing the number of internal calls will be a fairly
cheap win for most typical cases - both dma_map_page() for more than one
page, and dma_map_sg() from users like the block layer rather than
gigantic pathological dma-buf imports - but we still want to work on
getting the individual call overhead down to a reasonable level as well.
Thanks,
Robin.
>>> Changes since v1:
>>>
>>> -Fixed an off by one error in arm_[lpae/v7s]_map_by_pgsize
>>> when checking if the IOVA and physical address ranges being
>>> mapped are within the appropriate limits.
>>> -Added Sai Prakash Ranjan's "Tested-by" tag.
>>>
>>> Thanks,
>>> Isaac
>>>
>>> Isaac J. Manjarres (5):
>>> iommu/io-pgtable: Introduce map_sg() as a page table op
>>> iommu/io-pgtable-arm: Hook up map_sg()
>>> iommu/io-pgtable-arm-v7s: Hook up map_sg()
>>> iommu: Introduce map_sg() as an IOMMU op for IOMMU drivers
>>> iommu/arm-smmu: Hook up map_sg()
>>>
>>> drivers/iommu/arm/arm-smmu/arm-smmu.c | 19 ++++++++
>>> drivers/iommu/io-pgtable-arm-v7s.c | 90
>>> +++++++++++++++++++++++++++++++++++
>>> drivers/iommu/io-pgtable-arm.c | 86
>>> +++++++++++++++++++++++++++++++++
>>> drivers/iommu/iommu.c | 25 ++++++++--
>>> include/linux/io-pgtable.h | 6 +++
>>> include/linux/iommu.h | 13 +++++
>>> 6 files changed, 234 insertions(+), 5 deletions(-)
>>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> _______________________________________________
> iommu mailing list
> [email protected]
> https://lists.linuxfoundation.org/mailman/listinfo/iommu