2021-01-13 03:39:36

by Koba Ko

[permalink] [raw]
Subject: [PATCH 1/2] drm/dp_mst: Retrieve extended DPCD caps for topology manager

As per DP-1.3, First check DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 1,read the DP_DP13_DPCD_REV to
get the faster capability.
If DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is 0,read DP_DPCD_REV.

Signed-off-by: Koba Ko <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
[added aux name to drm_dbg_kms() call]
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
---
drivers/gpu/drm/drm_dp_mst_topology.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 0401b2f47500..6982ecbf30b5 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3686,9 +3686,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
WARN_ON(mgr->mst_primary);

/* get dpcd info */
- ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE);
- if (ret != DP_RECEIVER_CAP_SIZE) {
- DRM_DEBUG_KMS("failed to read DPCD\n");
+ ret = drm_dp_read_dpcd_caps(mgr->aux, mgr->dpcd);
+ if (ret < 0) {
+ drm_dbg_kms(mgr->dev, "%s: failed to read DPCD, ret %d\n",
+ mgr->aux->name, ret);
goto out_unlock;
}

--
2.25.1


2021-01-13 03:39:54

by Koba Ko

[permalink] [raw]
Subject: [PATCH 2/2] drm/dp_mst: Align mst link rate with soure rate

After read the link rate from MST hub, align with
maximum source rate.

Signed-off-by: Koba Ko <[email protected]>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 8 ++++++++
drivers/gpu/drm/i915/display/intel_dp.c | 7 +++++++
include/drm/drm_dp_helper.h | 8 ++++++++
include/drm/drm_dp_mst_helper.h | 4 ++++
4 files changed, 27 insertions(+)

diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 6982ecbf30b5..e7ceae97be85 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3672,6 +3672,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
{
int ret = 0;
struct drm_dp_mst_branch *mstb = NULL;
+ unsigned int max_link_rate_tbl[MAX_DRM_DP_MAX_RATE + 1] = {
+ DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4,
+ DP_LINK_BW_8_1, DP_LINK_RATE_TABLE
+ };

mutex_lock(&mgr->payload_lock);
mutex_lock(&mgr->lock);
@@ -3693,6 +3697,9 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
goto out_unlock;
}

+ if (mgr->max_source_rate < MAX_DRM_DP_MAX_RATE)
+ mgr->dpcd[1] = max_link_rate_tbl[mgr->max_source_rate];
+
mgr->pbn_div = drm_dp_get_vc_payload_bw(mgr->dpcd[1],
mgr->dpcd[2] & DP_MAX_LANE_COUNT_MASK);
if (mgr->pbn_div == 0) {
@@ -5422,6 +5429,7 @@ int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
mgr->aux = aux;
mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes;
mgr->max_payloads = max_payloads;
+ mgr->max_source_rate = MAX_DRM_DP_MAX_RATE;
mgr->conn_base_id = conn_base_id;
if (max_payloads + 1 > sizeof(mgr->payload_mask) * 8 ||
max_payloads + 1 > sizeof(mgr->vcpi_mask) * 8)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 469e765a1b7b..a89b4c823123 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -5392,6 +5392,13 @@ intel_dp_configure_mst(struct intel_dp *intel_dp)
intel_dp->is_mst = sink_can_mst &&
i915->params.enable_dp_mst;

+ if (intel_dp_source_supports_hbr3(intel_dp))
+ intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR3;
+ else if (intel_dp_source_supports_hbr2(intel_dp))
+ intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR2;
+ else
+ intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR;
+
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
intel_dp->is_mst);
}
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 6236f212da61..ef2b328469cd 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -183,6 +183,14 @@ struct drm_device;
#define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */
# define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */

+enum drm_dp_max_link_rate {
+ DRM_DP_MAX_RATE_RBR = 0,
+ DRM_DP_MAX_RATE_HBR,
+ DRM_DP_MAX_RATE_HBR2,
+ DRM_DP_MAX_RATE_HBR3,
+ MAX_DRM_DP_MAX_RATE
+};
+
/* Multiple stream transport */
#define DP_FAUX_CAP 0x020 /* 1.2 */
# define DP_FAUX_CAP_1 (1 << 0)
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index f5e92fe9151c..e7d8c899fea0 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -593,6 +593,10 @@ struct drm_dp_mst_topology_mgr {
* @max_payloads: maximum number of payloads the GPU can generate.
*/
int max_payloads;
+ /**
+ * @max_source_rate: maximum link rate of source.
+ */
+ int max_source_rate;
/**
* @conn_base_id: DRM connector ID this mgr is connected to. Only used
* to build the MST connector path value.
--
2.25.1

2021-01-13 11:53:33

by Jani Nikula

[permalink] [raw]
Subject: Re: [PATCH 2/2] drm/dp_mst: Align mst link rate with soure rate

On Wed, 13 Jan 2021, Koba Ko <[email protected]> wrote:
> After read the link rate from MST hub, align with
> maximum source rate.
>
> Signed-off-by: Koba Ko <[email protected]>
> ---
> drivers/gpu/drm/drm_dp_mst_topology.c | 8 ++++++++
> drivers/gpu/drm/i915/display/intel_dp.c | 7 +++++++
> include/drm/drm_dp_helper.h | 8 ++++++++
> include/drm/drm_dp_mst_helper.h | 4 ++++
> 4 files changed, 27 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 6982ecbf30b5..e7ceae97be85 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -3672,6 +3672,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
> {
> int ret = 0;
> struct drm_dp_mst_branch *mstb = NULL;
> + unsigned int max_link_rate_tbl[MAX_DRM_DP_MAX_RATE + 1] = {
> + DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4,
> + DP_LINK_BW_8_1, DP_LINK_RATE_TABLE
> + };

Please no. Read on for why.

>
> mutex_lock(&mgr->payload_lock);
> mutex_lock(&mgr->lock);
> @@ -3693,6 +3697,9 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
> goto out_unlock;
> }
>
> + if (mgr->max_source_rate < MAX_DRM_DP_MAX_RATE)
> + mgr->dpcd[1] = max_link_rate_tbl[mgr->max_source_rate];

Make ->max_source_rate the actual physical rate in kHz, and use
drm_dp_link_rate_to_bw_code() here.

> +
> mgr->pbn_div = drm_dp_get_vc_payload_bw(mgr->dpcd[1],
> mgr->dpcd[2] & DP_MAX_LANE_COUNT_MASK);
> if (mgr->pbn_div == 0) {
> @@ -5422,6 +5429,7 @@ int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
> mgr->aux = aux;
> mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes;
> mgr->max_payloads = max_payloads;
> + mgr->max_source_rate = MAX_DRM_DP_MAX_RATE;
> mgr->conn_base_id = conn_base_id;
> if (max_payloads + 1 > sizeof(mgr->payload_mask) * 8 ||
> max_payloads + 1 > sizeof(mgr->vcpi_mask) * 8)
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 469e765a1b7b..a89b4c823123 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -5392,6 +5392,13 @@ intel_dp_configure_mst(struct intel_dp *intel_dp)
> intel_dp->is_mst = sink_can_mst &&
> i915->params.enable_dp_mst;
>
> + if (intel_dp_source_supports_hbr3(intel_dp))
> + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR3;
> + else if (intel_dp_source_supports_hbr2(intel_dp))
> + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR2;
> + else
> + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR;

Whenever this file references a "rate", it's the rate in kHz. This is
confusing. Use the rate in kHz.

Also, please look at how intel_dp_source_supports_hbr* are implemented;
we already have all the supported source rates cached in intel_dp.

The max source rate is:

intel_dp->source_rates[intel_dp->num_source_rates - 1].

No need to do the if ladder here at all. If you like, you can add a
helper:

int intel_dp_max_source_rate(struct intel_dp *intel_dp)
{
return intel_dp->source_rates[intel_dp->num_source_rates - 1];
}

and reuse that in the supports_hbr* functions:

bool intel_dp_source_supports_hbr2(struct intel_dp *intel_dp)
{
return intel_dp_max_source_rate(intel_dp) >= 540000;
}

> +
> drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
> intel_dp->is_mst);
> }
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 6236f212da61..ef2b328469cd 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -183,6 +183,14 @@ struct drm_device;
> #define DP_SUPPORTED_LINK_RATES 0x010 /* eDP 1.4 */
> # define DP_MAX_SUPPORTED_RATES 8 /* 16-bit little-endian */
>
> +enum drm_dp_max_link_rate {
> + DRM_DP_MAX_RATE_RBR = 0,
> + DRM_DP_MAX_RATE_HBR,
> + DRM_DP_MAX_RATE_HBR2,
> + DRM_DP_MAX_RATE_HBR3,
> + MAX_DRM_DP_MAX_RATE
> +};

We already have 1) actual physical rates, in kHz, and 2) the DPCD rate
codes, such as DP_LINK_BW_1_62.

Do *not* add a third representation. Prefer kHz throughout, and convert
to/from the DPCD codes near where they are needed.

> +
> /* Multiple stream transport */
> #define DP_FAUX_CAP 0x020 /* 1.2 */
> # define DP_FAUX_CAP_1 (1 << 0)
> diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
> index f5e92fe9151c..e7d8c899fea0 100644
> --- a/include/drm/drm_dp_mst_helper.h
> +++ b/include/drm/drm_dp_mst_helper.h
> @@ -593,6 +593,10 @@ struct drm_dp_mst_topology_mgr {
> * @max_payloads: maximum number of payloads the GPU can generate.
> */
> int max_payloads;
> + /**
> + * @max_source_rate: maximum link rate of source.
> + */
> + int max_source_rate;

Again, make this the actual rate in kHz. That's what I'd think it is by
reading the comment above anyway.

> /**
> * @conn_base_id: DRM connector ID this mgr is connected to. Only used
> * to build the MST connector path value.

--
Jani Nikula, Intel Open Source Graphics Center

2021-01-26 01:30:52

by Ville Syrjälä

[permalink] [raw]
Subject: Re: [PATCH 2/2] drm/dp_mst: Align mst link rate with soure rate

On Wed, Jan 13, 2021 at 01:51:00PM +0200, Jani Nikula wrote:
> On Wed, 13 Jan 2021, Koba Ko <[email protected]> wrote:
> > After read the link rate from MST hub, align with
> > maximum source rate.
> >
> > Signed-off-by: Koba Ko <[email protected]>
> > ---
> > drivers/gpu/drm/drm_dp_mst_topology.c | 8 ++++++++
> > drivers/gpu/drm/i915/display/intel_dp.c | 7 +++++++
> > include/drm/drm_dp_helper.h | 8 ++++++++
> > include/drm/drm_dp_mst_helper.h | 4 ++++
> > 4 files changed, 27 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> > index 6982ecbf30b5..e7ceae97be85 100644
> > --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > @@ -3672,6 +3672,10 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
> > {
> > int ret = 0;
> > struct drm_dp_mst_branch *mstb = NULL;
> > + unsigned int max_link_rate_tbl[MAX_DRM_DP_MAX_RATE + 1] = {
> > + DP_LINK_BW_1_62, DP_LINK_BW_2_7, DP_LINK_BW_5_4,
> > + DP_LINK_BW_8_1, DP_LINK_RATE_TABLE
> > + };
>
> Please no. Read on for why.
>
> >
> > mutex_lock(&mgr->payload_lock);
> > mutex_lock(&mgr->lock);
> > @@ -3693,6 +3697,9 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
> > goto out_unlock;
> > }
> >
> > + if (mgr->max_source_rate < MAX_DRM_DP_MAX_RATE)
> > + mgr->dpcd[1] = max_link_rate_tbl[mgr->max_source_rate];
>
> Make ->max_source_rate the actual physical rate in kHz, and use
> drm_dp_link_rate_to_bw_code() here.
>
> > +
> > mgr->pbn_div = drm_dp_get_vc_payload_bw(mgr->dpcd[1],
> > mgr->dpcd[2] & DP_MAX_LANE_COUNT_MASK);
> > if (mgr->pbn_div == 0) {
> > @@ -5422,6 +5429,7 @@ int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr,
> > mgr->aux = aux;
> > mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes;
> > mgr->max_payloads = max_payloads;
> > + mgr->max_source_rate = MAX_DRM_DP_MAX_RATE;
> > mgr->conn_base_id = conn_base_id;
> > if (max_payloads + 1 > sizeof(mgr->payload_mask) * 8 ||
> > max_payloads + 1 > sizeof(mgr->vcpi_mask) * 8)
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 469e765a1b7b..a89b4c823123 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -5392,6 +5392,13 @@ intel_dp_configure_mst(struct intel_dp *intel_dp)
> > intel_dp->is_mst = sink_can_mst &&
> > i915->params.enable_dp_mst;
> >
> > + if (intel_dp_source_supports_hbr3(intel_dp))
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR3;
> > + else if (intel_dp_source_supports_hbr2(intel_dp))
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR2;
> > + else
> > + intel_dp->mst_mgr.max_source_rate = DRM_DP_MAX_RATE_HBR;
>
> Whenever this file references a "rate", it's the rate in kHz. This is
> confusing. Use the rate in kHz.
>
> Also, please look at how intel_dp_source_supports_hbr* are implemented;
> we already have all the supported source rates cached in intel_dp.
>
> The max source rate is:
>
> intel_dp->source_rates[intel_dp->num_source_rates - 1].
>
> No need to do the if ladder here at all. If you like, you can add a
> helper:
>
> int intel_dp_max_source_rate(struct intel_dp *intel_dp)
> {
> return intel_dp->source_rates[intel_dp->num_source_rates - 1];
> }

Using the max source rate isn't super great either. A bit better
than the current mess though.

The correct fix would be to let the driver provide the actually
used link_rate+lane_count to the MST code during atomic_check(),
instead of trying to guess what the driver is going to use.

--
Ville Syrj?l?
Intel