From: Guenter Roeck <[email protected]>
The DWC2 documentation states that transfers with zero data length should
set the number of packets to 1 and the transfer length to 0. This is not
currently the case for inbound transfers: the transfer length is set to
the maximum packet length. This can have adverse effects if the chip
actually does transfer data as it is programmed to do. Follow chip
documentation and keep the transfer length set to 0 in that situation.
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Fixes: 56f5b1cff22a1 ("staging: Core files for the DWC2 driver")
Signed-off-by: Nicolas Saenz Julienne <[email protected]>
Tested-by: Nicolas Saenz Julienne <[email protected]>
---
drivers/usb/dwc2/hcd.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e9ac215b9663..fc3269f5faf1 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -1313,19 +1313,20 @@ static void dwc2_hc_start_transfer(struct dwc2_hsotg *hsotg,
if (num_packets > max_hc_pkt_count) {
num_packets = max_hc_pkt_count;
chan->xfer_len = num_packets * chan->max_packet;
+ } else if (chan->ep_is_in) {
+ /*
+ * Always program an integral # of max packets
+ * for IN transfers.
+ * Note: This assumes that the input buffer is
+ * aligned and sized accordingly.
+ */
+ chan->xfer_len = num_packets * chan->max_packet;
}
} else {
/* Need 1 packet for transfer length of 0 */
num_packets = 1;
}
- if (chan->ep_is_in)
- /*
- * Always program an integral # of max packets for IN
- * transfers
- */
- chan->xfer_len = num_packets * chan->max_packet;
-
if (chan->ep_type == USB_ENDPOINT_XFER_INT ||
chan->ep_type == USB_ENDPOINT_XFER_ISOC)
/*
--
2.29.2