In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode
was added to report RPM's from a fan tach input.
Add this mode to the dt-bindings for the Gateworks System Controller.
Signed-off-by: Tim Harvey <[email protected]>
---
Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index d08e8fe..5a1e8d2 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -83,8 +83,9 @@ properties:
2 - scaled voltage based on an optional resistor divider
and optional offset
3 - pre-scaled 16-bit voltage value
+ 4 - fan tach input to report RPM's
$ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
+ enum: [0, 1, 2, 3, 4]
gw,voltage-divider-ohms:
description: Values of resistors for divider on raw ADC input
--
2.7.4
On Mon, 28 Dec 2020 11:28:36 -0800, Tim Harvey wrote:
> In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode
> was added to report RPM's from a fan tach input.
>
> Add this mode to the dt-bindings for the Gateworks System Controller.
>
> Signed-off-by: Tim Harvey <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Acked-by: Rob Herring <[email protected]>
On Mon, 28 Dec 2020, Tim Harvey wrote:
> In 7497d4a66c59 ("hwmon: (gsc-hwmon) add fan sensor") a mode
> was added to report RPM's from a fan tach input.
>
> Add this mode to the dt-bindings for the Gateworks System Controller.
>
> Signed-off-by: Tim Harvey <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
Applied, thanks.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog