2021-01-10 11:40:46

by Adam Ford

[permalink] [raw]
Subject: [PATCH] arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1

The WiFi chip is capable of communication at SDR104 speeds.
Enable 100Mhz and 200MHz pinmux to support this.

Signed-off-by: Adam Ford <[email protected]>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index d897913537ca..988f8ab679ad 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -256,8 +256,10 @@ bluetooth {
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
cap-power-off-card;
--
2.25.1


2021-01-13 06:07:28

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1

On Sun, Jan 10, 2021 at 05:38:26AM -0600, Adam Ford wrote:
> The WiFi chip is capable of communication at SDR104 speeds.
> Enable 100Mhz and 200MHz pinmux to support this.
>
> Signed-off-by: Adam Ford <[email protected]>
>

Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof

2021-01-18 00:42:38

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: imx8mm-beacon: add more pinctrl states for usdhc1

On Sun, Jan 10, 2021 at 05:38:26AM -0600, Adam Ford wrote:
> The WiFi chip is capable of communication at SDR104 speeds.
> Enable 100Mhz and 200MHz pinmux to support this.
>
> Signed-off-by: Adam Ford <[email protected]>

Applied, thanks.