Phoronix.com discovered a severe performance regression on AMD APYC
introduced on schedutil [see link 1] by the following commits from v5.11-rc1
commit 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
commit 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Furthermore commit db865272d9c4 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from v5.10 made it extremely easy to default to
schedutil even if the preferred driver is acpi_cpufreq. Distros are likely to
build both intel_pstate and acpi_cpufreq on x86, and the presence of the
former removes ondemand from the defaults. This situation amplifies the
visibility of the bug we're addressing.
[link 1] https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1
1. PROBLEM DESCRIPTION : over-utilization and schedutil
2. PROPOSED SOLUTION : raise freq_max in schedutil formula
3. DATA TABLE : image processing benchmark
4. ANALYSIS AND COMMENTS : with over-utilization, freq-invariance is lost
1. PROBLEM DESCRIPTION (over-utilization and schedutil)
The problem happens on CPU-bound workloads spanning a large number of cores.
In this case schedutil won't select the maximum P-State. Actually, it's
likely that it will select the minimum one.
A CPU-bound workload puts the machine in a state generally called
"over-utilization": an increase in CPU speed doesn't result in an increase of
capacity. The fraction of time tasks spend on CPU becomes constant regardless
of clock frequency (the tasks eat whatever we throw at them), and the PELT
invariant util goes up and down with the frequency (i.e. it's not invariant
anymore).
2. PROPOSED SOLUTION (raise freq_max in schedutil formula)
The solution we implement here is a stop-gap one: when the driver is
acpi_cpufreq and the machine an AMD EPYC, schedutil will use max_boost instead
of max_P as the value for freq_max in its formula
freq_next = 1.25 * freq_max * util
essentially giving freq_next some more headroom to grow in the over-utilized
case. This is the approach also followed by intel_pstate in passive mode.
The correct way to attack this problem would be to have schedutil detect
over-utilization and select freq_max irrespective of the util value, which has
no meaning at that point. This approach is too risky for an -rc5 submission so
we defer it to the next cycle.
3. DATA TABLE (image processing benchmark)
What follow is a more detailed account of the effects on a specific test.
TEST : Intel Open Image Denoise, http://www.openimagedenoise.org
INVOCATION : ./denoise -hdr memorial.pfm -out out.pfm -bench 200 -threads $NTHREADS
CPU : MODEL : 2x AMD EPYC 7742
FREQUENCY TABLE : P2: 1.50 GHz
P1: 2.00 GHz
P0: 2.25 GHz
MAX BOOST : 3.40 GHz
Results: threads, msecs (ratio). Lower is better.
v5.10 v5.11-rc4 v5.11-rc4-patch
-------------------------------------------------------
1 1069.85 (1.00) 1071.84 (1.00) 1070.42 (1.00)
2 542.24 (1.00) 544.40 (1.00) 544.48 (1.00)
4 278.00 (1.00) 278.44 (1.00) 277.72 (1.00)
8 149.81 (1.00) 149.61 (1.00) 149.87 (1.00)
16 79.01 (1.00) 79.31 (1.00) 78.94 (1.00)
24 58.01 (1.00) 58.51 (1.01) 58.15 (1.00)
32 46.58 (1.00) 48.30 (1.04) 46.66 (1.00)
48 37.29 (1.00) 51.29 (1.38) 37.27 (1.00)
64 34.01 (1.00) 49.59 (1.46) 33.71 (0.99)
80 31.09 (1.00) 44.27 (1.42) 31.33 (1.01)
96 28.56 (1.00) 40.82 (1.43) 28.47 (1.00)
112 28.09 (1.00) 40.06 (1.43) 28.63 (1.02)
120 28.73 (1.00) 39.78 (1.38) 28.14 (0.98)
128 28.93 (1.00) 39.60 (1.37) 29.38 (1.02)
See how the 128 threads case is almost 40% worse than baseline in v5.11-rc4.
4. ANALYSIS AND COMMENTS (with over-utilization freq-invariance is lost)
Statistics for NTHREADS=128 (number of physical cores of the machine)
v5.10 v5.11-rc4
------------------------
CPU activity (mpstat) 80-90% 80-90%
schedutil requests (tracepoint) always P0 mostly P2
CPU frequency (HW feedback) ~2.2 GHz ~1.5 GHz
PELT root rq util (tracepoint) ~825 ~450
mpstat shows that the workload is CPU-bound and usage doesn't change with
clock speed. What is striking is that the PELT util of any root runqueue in
v5.11-rc4 is half of what used to be before the frequency invariant support
(v5.10), leading to wrong frequency choices. How did we get there?
This workload is constant in time, so instead of using the PELT sum we can
pretend that scale invariance is obtained with
util_inv = util_raw * freq_curr / freq_max1 [formula-1]
where util_raw is the PELT util from v5.10 (which is to say, not invariant),
and util_inv is the PELT util from v5.11-rc4. freq_max1 comes from
commit 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for
frequency invariance on AMD EPYC") and is (P0+max_boost)/2 = (2.25+3.4)/2 =
2.825 GHz. Then we have the schedutil formula
freq_next = 1.25 * freq_max2 * util_inv [formula-2]
Here v5.11-rc4 uses freq_max2 = P0 = 2.25 GHz (and this patch changes it to
3.4 GHz).
Since all cores are busy, there is no boost available. Let's be generous and say
the tasks initially get P0, i.e. freq_curr = 2.25 GHz. Combining the formulas
above and taking util_raw = 825/1024 = 0.8, freq_next is:
freq_next = 1.25 * 2.25 * 0.8 * 2.25 / 2.825 = 1.79 GHz
After quantization (pick the next frequency up in the table), freq_next is
P1 = 2.0 GHz. See how we lost 250 MHz in the process. Iterate once more,
freq_next become 1.59 GHz. Since it's > P2, it's saved by quantization and P1
is selected, but if util_raw fluctuates a little and goes below 0.75, P0 is
selected and that kills util_inv by formula-1, which gives util_inv = 0.4.
The culprit of the problem is that with over-utilization, util_raw and
freq_curr in formula-1 are independent. In the nominal case, if freq_curr goes
up then util_raw goes down and viceversa. Here util_raw doesn't care and stays
constant. If freq_curr descrease, util_inv decreases too and so forth (it's a
feedback loop).
Fixes: 41ea667227ba ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e5730e ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Signed-off-by: Giovanni Gherdovich <[email protected]>
---
drivers/cpufreq/freq_table.c | 51 ++++++++++++++++++++++++++++++++
include/linux/cpufreq.h | 5 ++++
kernel/sched/cpufreq_schedutil.c | 8 +++--
3 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index f839dc9852c0..f143c7db9d85 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -10,6 +10,10 @@
#include <linux/cpufreq.h>
#include <linux/module.h>
+#ifdef CONFIG_ACPI_CPPC_LIB
+#include <acpi/cppc_acpi.h>
+#endif
+
/*********************************************************************
* FREQUENCY TABLE HELPERS *
*********************************************************************/
@@ -29,12 +33,53 @@ bool policy_has_boost_freq(struct cpufreq_policy *policy)
}
EXPORT_SYMBOL_GPL(policy_has_boost_freq);
+#ifdef CONFIG_ACPI_CPPC_LIB
+static bool amd_max_boost(unsigned int max_freq, unsigned int *max_boost)
+{
+ struct cppc_perf_caps perf_caps;
+ u64 highest_perf, nominal_perf, perf_ratio;
+ int ret;
+
+ ret = cppc_get_perf_caps(0, &perf_caps);
+ if (ret) {
+ pr_debug("Could not retrieve perf counters (%d)\n", ret);
+ return false;
+ }
+
+ highest_perf = perf_caps.highest_perf;
+ nominal_perf = perf_caps.nominal_perf;
+
+ if (!highest_perf || !nominal_perf) {
+ pr_debug("Could not retrieve highest or nominal performance\n");
+ return false;
+ }
+
+ perf_ratio = div_u64(highest_perf * SCHED_CAPACITY_SCALE, nominal_perf);
+ if (perf_ratio <= SCHED_CAPACITY_SCALE) {
+ pr_debug("Either perf_ratio is 0, or nominal >= highest performance\n");
+ return false;
+ }
+
+ *max_boost = max_freq * perf_ratio >> SCHED_CAPACITY_SHIFT;
+
+ return true;
+}
+#else
+static int amd_max_boost(unsigned int max_freq, unsigned int *max_boost)
+{
+ return false;
+}
+#endif
+
+DEFINE_STATIC_KEY_FALSE(cpufreq_amd_max_boost);
+
int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
struct cpufreq_frequency_table *table)
{
struct cpufreq_frequency_table *pos;
unsigned int min_freq = ~0;
unsigned int max_freq = 0;
+ unsigned int max_boost;
unsigned int freq;
cpufreq_for_each_valid_entry(pos, table) {
@@ -54,6 +99,12 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
policy->min = policy->cpuinfo.min_freq = min_freq;
policy->max = policy->cpuinfo.max_freq = max_freq;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ amd_max_boost(max_freq, &max_boost)) {
+ policy->cpuinfo.max_boost = max_boost;
+ static_branch_enable(&cpufreq_amd_max_boost);
+ }
+
if (policy->min == ~0)
return -EINVAL;
else
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9c8b7437b6cd..341cac76d254 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -40,9 +40,14 @@ enum cpufreq_table_sorting {
CPUFREQ_TABLE_SORTED_DESCENDING
};
+DECLARE_STATIC_KEY_FALSE(cpufreq_amd_max_boost);
+
+#define cpufreq_driver_has_max_boost() static_branch_unlikely(&cpufreq_amd_max_boost)
+
struct cpufreq_cpuinfo {
unsigned int max_freq;
unsigned int min_freq;
+ unsigned int max_boost;
/* in 10^(-9) s = nanoseconds */
unsigned int transition_latency;
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 6931f0cdeb80..541f3db3f576 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -159,8 +159,12 @@ static unsigned int get_next_freq(struct sugov_policy *sg_policy,
unsigned long util, unsigned long max)
{
struct cpufreq_policy *policy = sg_policy->policy;
- unsigned int freq = arch_scale_freq_invariant() ?
- policy->cpuinfo.max_freq : policy->cur;
+ unsigned int freq, max_freq;
+
+ max_freq = cpufreq_driver_has_max_boost() ?
+ policy->cpuinfo.max_boost : policy->cpuinfo.max_freq;
+
+ freq = arch_scale_freq_invariant() ? max_freq : policy->cur;
freq = map_util_freq(util, freq, max);
--
2.26.2