From: Eric Dumazet <[email protected]>
Date: Thu, 21 Jan 2021 16:41:33 +0100
> On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > This patch is used to construct skb based on page to save memory copy
> > overhead.
> >
> > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > directly construct skb. If this feature is not supported, it is still
> > necessary to copy data to construct skb.
> >
> > ---------------- Performance Testing ------------
> >
> > The test environment is Aliyun ECS server.
> > Test cmd:
> > ```
> > xdpsock -i eth0 -t -S -s <msg size>
> > ```
> >
> > Test result data:
> >
> > size 64 512 1024 1500
> > copy 1916747 1775988 1600203 1440054
> > page 1974058 1953655 1945463 1904478
> > percent 3.0% 10.0% 21.58% 32.3%
> >
> > Signed-off-by: Xuan Zhuo <[email protected]>
> > Reviewed-by: Dust Li <[email protected]>
> > ---
> > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > 1 file changed, 86 insertions(+), 18 deletions(-)
> >
> > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > index 4a83117..38af7f1 100644
> > --- a/net/xdp/xsk.c
> > +++ b/net/xdp/xsk.c
> > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > sock_wfree(skb);
> > }
> >
> > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > + struct xdp_desc *desc)
> > +{
> > + u32 len, offset, copy, copied;
> > + struct sk_buff *skb;
> > + struct page *page;
> > + void *buffer;
> > + int err, i;
> > + u64 addr;
> > +
> > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> > + if (unlikely(!skb))
> > + return ERR_PTR(err);
> > +
> > + addr = desc->addr;
> > + len = desc->len;
> > +
> > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > + offset = offset_in_page(buffer);
> > + addr = buffer - xs->pool->addrs;
> > +
> > + for (copied = 0, i = 0; copied < len; i++) {
> > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > +
> > + get_page(page);
> > +
> > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > +
> > + skb_fill_page_desc(skb, i, page, offset, copy);
> > +
> > + copied += copy;
> > + addr += copy;
> > + offset = 0;
> > + }
> > +
> > + skb->len += len;
> > + skb->data_len += len;
>
> > + skb->truesize += len;
>
> This is not the truesize, unfortunately.
>
> We need to account for the number of pages, not number of bytes.
The easiest solution is:
skb->truesize += PAGE_SIZE * i;
i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
> > +
> > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > +
> > + return skb;
> > +}
> > +
Al
From: Alexander Lobakin <[email protected]>
Date: Fri, 22 Jan 2021 11:47:45 +0000
> From: Eric Dumazet <[email protected]>
> Date: Thu, 21 Jan 2021 16:41:33 +0100
>
> > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > This patch is used to construct skb based on page to save memory copy
> > > overhead.
> > >
> > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > directly construct skb. If this feature is not supported, it is still
> > > necessary to copy data to construct skb.
> > >
> > > ---------------- Performance Testing ------------
> > >
> > > The test environment is Aliyun ECS server.
> > > Test cmd:
> > > ```
> > > xdpsock -i eth0 -t -S -s <msg size>
> > > ```
> > >
> > > Test result data:
> > >
> > > size 64 512 1024 1500
> > > copy 1916747 1775988 1600203 1440054
> > > page 1974058 1953655 1945463 1904478
> > > percent 3.0% 10.0% 21.58% 32.3%
> > >
> > > Signed-off-by: Xuan Zhuo <[email protected]>
> > > Reviewed-by: Dust Li <[email protected]>
> > > ---
> > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > >
> > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > index 4a83117..38af7f1 100644
> > > --- a/net/xdp/xsk.c
> > > +++ b/net/xdp/xsk.c
> > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > sock_wfree(skb);
> > > }
> > >
> > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > + struct xdp_desc *desc)
> > > +{
> > > + u32 len, offset, copy, copied;
> > > + struct sk_buff *skb;
> > > + struct page *page;
> > > + void *buffer;
> > > + int err, i;
> > > + u64 addr;
> > > +
> > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> > > + if (unlikely(!skb))
> > > + return ERR_PTR(err);
> > > +
> > > + addr = desc->addr;
> > > + len = desc->len;
> > > +
> > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > + offset = offset_in_page(buffer);
> > > + addr = buffer - xs->pool->addrs;
> > > +
> > > + for (copied = 0, i = 0; copied < len; i++) {
> > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > +
> > > + get_page(page);
> > > +
> > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > +
> > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > +
> > > + copied += copy;
> > > + addr += copy;
> > > + offset = 0;
> > > + }
> > > +
> > > + skb->len += len;
> > > + skb->data_len += len;
> >
> > > + skb->truesize += len;
> >
> > This is not the truesize, unfortunately.
> >
> > We need to account for the number of pages, not number of bytes.
>
> The easiest solution is:
>
> skb->truesize += PAGE_SIZE * i;
>
> i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
Oops, pls ignore this. I forgot that XSK buffers are not
"one per page".
We need to count the number of pages manually and then do
skb->truesize += PAGE_SIZE * npages;
Right.
> > > +
> > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > +
> > > + return skb;
> > > +}
> > > +
>
> Al
Thanks,
Al
On Fri, Jan 22, 2021 at 12:57 PM Alexander Lobakin <[email protected]> wrote:
>
> From: Alexander Lobakin <[email protected]>
> Date: Fri, 22 Jan 2021 11:47:45 +0000
>
> > From: Eric Dumazet <[email protected]>
> > Date: Thu, 21 Jan 2021 16:41:33 +0100
> >
> > > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > > This patch is used to construct skb based on page to save memory copy
> > > > overhead.
> > > >
> > > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > > directly construct skb. If this feature is not supported, it is still
> > > > necessary to copy data to construct skb.
> > > >
> > > > ---------------- Performance Testing ------------
> > > >
> > > > The test environment is Aliyun ECS server.
> > > > Test cmd:
> > > > ```
> > > > xdpsock -i eth0 -t -S -s <msg size>
> > > > ```
> > > >
> > > > Test result data:
> > > >
> > > > size 64 512 1024 1500
> > > > copy 1916747 1775988 1600203 1440054
> > > > page 1974058 1953655 1945463 1904478
> > > > percent 3.0% 10.0% 21.58% 32.3%
> > > >
> > > > Signed-off-by: Xuan Zhuo <[email protected]>
> > > > Reviewed-by: Dust Li <[email protected]>
> > > > ---
> > > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > > >
> > > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > > index 4a83117..38af7f1 100644
> > > > --- a/net/xdp/xsk.c
> > > > +++ b/net/xdp/xsk.c
> > > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > > sock_wfree(skb);
> > > > }
> > > >
> > > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > > + struct xdp_desc *desc)
> > > > +{
> > > > + u32 len, offset, copy, copied;
> > > > + struct sk_buff *skb;
> > > > + struct page *page;
> > > > + void *buffer;
> > > > + int err, i;
> > > > + u64 addr;
> > > > +
> > > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> > > > + if (unlikely(!skb))
> > > > + return ERR_PTR(err);
> > > > +
> > > > + addr = desc->addr;
> > > > + len = desc->len;
> > > > +
> > > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > > + offset = offset_in_page(buffer);
> > > > + addr = buffer - xs->pool->addrs;
> > > > +
> > > > + for (copied = 0, i = 0; copied < len; i++) {
> > > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > > +
> > > > + get_page(page);
> > > > +
> > > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > > +
> > > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > > +
> > > > + copied += copy;
> > > > + addr += copy;
> > > > + offset = 0;
> > > > + }
> > > > +
> > > > + skb->len += len;
> > > > + skb->data_len += len;
> > >
> > > > + skb->truesize += len;
> > >
> > > This is not the truesize, unfortunately.
> > >
> > > We need to account for the number of pages, not number of bytes.
> >
> > The easiest solution is:
> >
> > skb->truesize += PAGE_SIZE * i;
> >
> > i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
>
> Oops, pls ignore this. I forgot that XSK buffers are not
> "one per page".
> We need to count the number of pages manually and then do
>
> skb->truesize += PAGE_SIZE * npages;
>
> Right.
There are two possible packet buffer (chunks) sizes in a umem, 2K and
4K on a system with a PAGE_SIZE of 4K. If I remember correctly, and
please correct me if wrong, truesize is used for memory accounting.
But in this code, no kernel memory has been allocated (apart from the
skb). The page is just a part of the umem that has been already
allocated beforehand and by user-space in this case. So what should
truesize be in this case? Do we add 0, chunk_size * i, or the
complicated case of counting exactly how many 4K pages that are used
when the chunk_size is 2K, as two chunks could occupy the same page,
or just the upper bound of PAGE_SIZE * i that is likely a good
approximation in most cases? Just note that there might be other uses
of truesize that I am unaware of that could impact this choice.
> > > > +
> > > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > > +
> > > > + return skb;
> > > > +}
> > > > +
> >
> > Al
>
> Thanks,
> Al
>
From: Alexander Lobakin <[email protected]>
Date: Fri, 22 Jan 2021 11:55:35 +0000
> From: Alexander Lobakin <[email protected]>
> Date: Fri, 22 Jan 2021 11:47:45 +0000
>
> > From: Eric Dumazet <[email protected]>
> > Date: Thu, 21 Jan 2021 16:41:33 +0100
> >
> > > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > > This patch is used to construct skb based on page to save memory copy
> > > > overhead.
> > > >
> > > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > > directly construct skb. If this feature is not supported, it is still
> > > > necessary to copy data to construct skb.
> > > >
> > > > ---------------- Performance Testing ------------
> > > >
> > > > The test environment is Aliyun ECS server.
> > > > Test cmd:
> > > > ```
> > > > xdpsock -i eth0 -t -S -s <msg size>
> > > > ```
> > > >
> > > > Test result data:
> > > >
> > > > size 64 512 1024 1500
> > > > copy 1916747 1775988 1600203 1440054
> > > > page 1974058 1953655 1945463 1904478
> > > > percent 3.0% 10.0% 21.58% 32.3%
> > > >
> > > > Signed-off-by: Xuan Zhuo <[email protected]>
> > > > Reviewed-by: Dust Li <[email protected]>
> > > > ---
> > > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > > >
> > > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > > index 4a83117..38af7f1 100644
> > > > --- a/net/xdp/xsk.c
> > > > +++ b/net/xdp/xsk.c
> > > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > > sock_wfree(skb);
> > > > }
> > > >
> > > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > > + struct xdp_desc *desc)
> > > > +{
> > > > + u32 len, offset, copy, copied;
> > > > + struct sk_buff *skb;
> > > > + struct page *page;
> > > > + void *buffer;
> > > > + int err, i;
> > > > + u64 addr;
> > > > +
> > > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
Also,
maybe we should allocate it with NET_SKB_PAD so NIC drivers could
use some reserved space?
skb = sock_alloc_send_skb(&xs->sk, NET_SKB_PAD, 1, &err);
...
skb_reserve(skb, NET_SKB_PAD);
Eric, what do you think?
> > > > + if (unlikely(!skb))
> > > > + return ERR_PTR(err);
> > > > +
> > > > + addr = desc->addr;
> > > > + len = desc->len;
> > > > +
> > > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > > + offset = offset_in_page(buffer);
> > > > + addr = buffer - xs->pool->addrs;
> > > > +
> > > > + for (copied = 0, i = 0; copied < len; i++) {
> > > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > > +
> > > > + get_page(page);
> > > > +
> > > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > > +
> > > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > > +
> > > > + copied += copy;
> > > > + addr += copy;
> > > > + offset = 0;
> > > > + }
> > > > +
> > > > + skb->len += len;
> > > > + skb->data_len += len;
> > >
> > > > + skb->truesize += len;
> > >
> > > This is not the truesize, unfortunately.
> > >
> > > We need to account for the number of pages, not number of bytes.
> >
> > The easiest solution is:
> >
> > skb->truesize += PAGE_SIZE * i;
> >
> > i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
>
> Oops, pls ignore this. I forgot that XSK buffers are not
> "one per page".
> We need to count the number of pages manually and then do
>
> skb->truesize += PAGE_SIZE * npages;
>
> Right.
>
> > > > +
> > > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > > +
> > > > + return skb;
> > > > +}
> > > > +
> >
> > Al
>
> Thanks,
> Al
Al
From: Magnus Karlsson <[email protected]>
Date: Fri, 22 Jan 2021 13:18:47 +0100
> On Fri, Jan 22, 2021 at 12:57 PM Alexander Lobakin <[email protected]> wrote:
> >
> > From: Alexander Lobakin <[email protected]>
> > Date: Fri, 22 Jan 2021 11:47:45 +0000
> >
> > > From: Eric Dumazet <[email protected]>
> > > Date: Thu, 21 Jan 2021 16:41:33 +0100
> > >
> > > > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > > > This patch is used to construct skb based on page to save memory copy
> > > > > overhead.
> > > > >
> > > > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > > > directly construct skb. If this feature is not supported, it is still
> > > > > necessary to copy data to construct skb.
> > > > >
> > > > > ---------------- Performance Testing ------------
> > > > >
> > > > > The test environment is Aliyun ECS server.
> > > > > Test cmd:
> > > > > ```
> > > > > xdpsock -i eth0 -t -S -s <msg size>
> > > > > ```
> > > > >
> > > > > Test result data:
> > > > >
> > > > > size 64 512 1024 1500
> > > > > copy 1916747 1775988 1600203 1440054
> > > > > page 1974058 1953655 1945463 1904478
> > > > > percent 3.0% 10.0% 21.58% 32.3%
> > > > >
> > > > > Signed-off-by: Xuan Zhuo <[email protected]>
> > > > > Reviewed-by: Dust Li <[email protected]>
> > > > > ---
> > > > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > > > >
> > > > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > > > index 4a83117..38af7f1 100644
> > > > > --- a/net/xdp/xsk.c
> > > > > +++ b/net/xdp/xsk.c
> > > > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > > > sock_wfree(skb);
> > > > > }
> > > > >
> > > > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > > > + struct xdp_desc *desc)
> > > > > +{
> > > > > + u32 len, offset, copy, copied;
> > > > > + struct sk_buff *skb;
> > > > > + struct page *page;
> > > > > + void *buffer;
> > > > > + int err, i;
> > > > > + u64 addr;
> > > > > +
> > > > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> > > > > + if (unlikely(!skb))
> > > > > + return ERR_PTR(err);
> > > > > +
> > > > > + addr = desc->addr;
> > > > > + len = desc->len;
> > > > > +
> > > > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > > > + offset = offset_in_page(buffer);
> > > > > + addr = buffer - xs->pool->addrs;
> > > > > +
> > > > > + for (copied = 0, i = 0; copied < len; i++) {
> > > > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > > > +
> > > > > + get_page(page);
> > > > > +
> > > > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > > > +
> > > > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > > > +
> > > > > + copied += copy;
> > > > > + addr += copy;
> > > > > + offset = 0;
> > > > > + }
> > > > > +
> > > > > + skb->len += len;
> > > > > + skb->data_len += len;
> > > >
> > > > > + skb->truesize += len;
> > > >
> > > > This is not the truesize, unfortunately.
> > > >
> > > > We need to account for the number of pages, not number of bytes.
> > >
> > > The easiest solution is:
> > >
> > > skb->truesize += PAGE_SIZE * i;
> > >
> > > i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
> >
> > Oops, pls ignore this. I forgot that XSK buffers are not
> > "one per page".
> > We need to count the number of pages manually and then do
> >
> > skb->truesize += PAGE_SIZE * npages;
> >
> > Right.
>
> There are two possible packet buffer (chunks) sizes in a umem, 2K and
> 4K on a system with a PAGE_SIZE of 4K. If I remember correctly, and
> please correct me if wrong, truesize is used for memory accounting.
> But in this code, no kernel memory has been allocated (apart from the
> skb). The page is just a part of the umem that has been already
> allocated beforehand and by user-space in this case. So what should
> truesize be in this case? Do we add 0, chunk_size * i, or the
> complicated case of counting exactly how many 4K pages that are used
> when the chunk_size is 2K, as two chunks could occupy the same page,
> or just the upper bound of PAGE_SIZE * i that is likely a good
> approximation in most cases? Just note that there might be other uses
> of truesize that I am unaware of that could impact this choice.
Truesize is "what amount of memory does this skb occupy with all its
fragments, linear space and struct sk_buff itself". The closest it
will be to the actual value, the better.
In this case, I think adding of chunk_size * i would be enough.
(PAGE_SIZE * i can be overwhelming when chunk_size is 2K, especially
for setups with PAGE_SIZE > SZ_4K)
> > > > > +
> > > > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > > > +
> > > > > + return skb;
> > > > > +}
> > > > > +
> > >
> > > Al
> >
> > Thanks,
> > Al
Al
On Fri, Jan 22, 2021 at 1:39 PM Alexander Lobakin <[email protected]> wrote:
>
> From: Magnus Karlsson <[email protected]>
> Date: Fri, 22 Jan 2021 13:18:47 +0100
>
> > On Fri, Jan 22, 2021 at 12:57 PM Alexander Lobakin <[email protected]> wrote:
> > >
> > > From: Alexander Lobakin <[email protected]>
> > > Date: Fri, 22 Jan 2021 11:47:45 +0000
> > >
> > > > From: Eric Dumazet <[email protected]>
> > > > Date: Thu, 21 Jan 2021 16:41:33 +0100
> > > >
> > > > > On 1/21/21 2:47 PM, Xuan Zhuo wrote:
> > > > > > This patch is used to construct skb based on page to save memory copy
> > > > > > overhead.
> > > > > >
> > > > > > This function is implemented based on IFF_TX_SKB_NO_LINEAR. Only the
> > > > > > network card priv_flags supports IFF_TX_SKB_NO_LINEAR will use page to
> > > > > > directly construct skb. If this feature is not supported, it is still
> > > > > > necessary to copy data to construct skb.
> > > > > >
> > > > > > ---------------- Performance Testing ------------
> > > > > >
> > > > > > The test environment is Aliyun ECS server.
> > > > > > Test cmd:
> > > > > > ```
> > > > > > xdpsock -i eth0 -t -S -s <msg size>
> > > > > > ```
> > > > > >
> > > > > > Test result data:
> > > > > >
> > > > > > size 64 512 1024 1500
> > > > > > copy 1916747 1775988 1600203 1440054
> > > > > > page 1974058 1953655 1945463 1904478
> > > > > > percent 3.0% 10.0% 21.58% 32.3%
> > > > > >
> > > > > > Signed-off-by: Xuan Zhuo <[email protected]>
> > > > > > Reviewed-by: Dust Li <[email protected]>
> > > > > > ---
> > > > > > net/xdp/xsk.c | 104 ++++++++++++++++++++++++++++++++++++++++++++++++----------
> > > > > > 1 file changed, 86 insertions(+), 18 deletions(-)
> > > > > >
> > > > > > diff --git a/net/xdp/xsk.c b/net/xdp/xsk.c
> > > > > > index 4a83117..38af7f1 100644
> > > > > > --- a/net/xdp/xsk.c
> > > > > > +++ b/net/xdp/xsk.c
> > > > > > @@ -430,6 +430,87 @@ static void xsk_destruct_skb(struct sk_buff *skb)
> > > > > > sock_wfree(skb);
> > > > > > }
> > > > > >
> > > > > > +static struct sk_buff *xsk_build_skb_zerocopy(struct xdp_sock *xs,
> > > > > > + struct xdp_desc *desc)
> > > > > > +{
> > > > > > + u32 len, offset, copy, copied;
> > > > > > + struct sk_buff *skb;
> > > > > > + struct page *page;
> > > > > > + void *buffer;
> > > > > > + int err, i;
> > > > > > + u64 addr;
> > > > > > +
> > > > > > + skb = sock_alloc_send_skb(&xs->sk, 0, 1, &err);
> > > > > > + if (unlikely(!skb))
> > > > > > + return ERR_PTR(err);
> > > > > > +
> > > > > > + addr = desc->addr;
> > > > > > + len = desc->len;
> > > > > > +
> > > > > > + buffer = xsk_buff_raw_get_data(xs->pool, addr);
> > > > > > + offset = offset_in_page(buffer);
> > > > > > + addr = buffer - xs->pool->addrs;
> > > > > > +
> > > > > > + for (copied = 0, i = 0; copied < len; i++) {
> > > > > > + page = xs->pool->umem->pgs[addr >> PAGE_SHIFT];
> > > > > > +
> > > > > > + get_page(page);
> > > > > > +
> > > > > > + copy = min_t(u32, PAGE_SIZE - offset, len - copied);
> > > > > > +
> > > > > > + skb_fill_page_desc(skb, i, page, offset, copy);
> > > > > > +
> > > > > > + copied += copy;
> > > > > > + addr += copy;
> > > > > > + offset = 0;
> > > > > > + }
> > > > > > +
> > > > > > + skb->len += len;
> > > > > > + skb->data_len += len;
> > > > >
> > > > > > + skb->truesize += len;
> > > > >
> > > > > This is not the truesize, unfortunately.
> > > > >
> > > > > We need to account for the number of pages, not number of bytes.
> > > >
> > > > The easiest solution is:
> > > >
> > > > skb->truesize += PAGE_SIZE * i;
> > > >
> > > > i would be equal to skb_shinfo(skb)->nr_frags after exiting the loop.
> > >
> > > Oops, pls ignore this. I forgot that XSK buffers are not
> > > "one per page".
> > > We need to count the number of pages manually and then do
> > >
> > > skb->truesize += PAGE_SIZE * npages;
> > >
> > > Right.
> >
> > There are two possible packet buffer (chunks) sizes in a umem, 2K and
> > 4K on a system with a PAGE_SIZE of 4K. If I remember correctly, and
> > please correct me if wrong, truesize is used for memory accounting.
> > But in this code, no kernel memory has been allocated (apart from the
> > skb). The page is just a part of the umem that has been already
> > allocated beforehand and by user-space in this case. So what should
> > truesize be in this case? Do we add 0, chunk_size * i, or the
> > complicated case of counting exactly how many 4K pages that are used
> > when the chunk_size is 2K, as two chunks could occupy the same page,
> > or just the upper bound of PAGE_SIZE * i that is likely a good
> > approximation in most cases? Just note that there might be other uses
> > of truesize that I am unaware of that could impact this choice.
>
> Truesize is "what amount of memory does this skb occupy with all its
> fragments, linear space and struct sk_buff itself". The closest it
> will be to the actual value, the better.
> In this case, I think adding of chunk_size * i would be enough.
Sounds like a good approximation to me.
> (PAGE_SIZE * i can be overwhelming when chunk_size is 2K, especially
> for setups with PAGE_SIZE > SZ_4K)
You are right. That would be quite horrible on a system with a page size of 64K.
> > > > > > +
> > > > > > + refcount_add(len, &xs->sk.sk_wmem_alloc);
> > > > > > +
> > > > > > + return skb;
> > > > > > +}
> > > > > > +
> > > >
> > > > Al
> > >
> > > Thanks,
> > > Al
>
> Al
>