fwnode_mdiobus_register() internally takes care of both DT
and ACPI cases to register mdiobus. Replace existing
of_mdiobus_register() with fwnode_mdiobus_register().
Note: For both ACPI and DT cases, endianness of MDIO controller
need to be specified using "little-endian" property.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v4:
- Cleanup xgmac_mdio_probe()
Changes in v3:
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h
Changes in v2: None
drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index bfa2826c5545..dca5305e7185 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
* QorIQ 10G MDIO Controller
*
* Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
*
* Authors: Andy Fleming <[email protected]>
* Timur Tabi <[email protected]>
@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
static int xgmac_mdio_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
- struct mii_bus *bus;
- struct resource *res;
struct mdio_fsl_priv *priv;
+ struct resource *res;
+ struct mii_bus *bus;
int ret;
/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
goto err_ioremap;
}
+ /* For both ACPI and DT cases, endianness of MDIO controller
+ * needs to be specified using "little-endian" property.
+ */
priv->is_little_endian = device_property_read_bool(&pdev->dev,
"little-endian");
priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");
- ret = of_mdiobus_register(bus, np);
+ ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
if (ret) {
dev_err(&pdev->dev, "cannot register MDIO bus\n");
goto err_registration;
--
2.17.1