On 26/01/2021 18:02:11+0100, Thomas Gleixner wrote:
> The recent fix for handling the UIP bit unearthed another issue in the RTC
> code. If the RTC is advertised but the readout is straight 0xFF because
> it's not available, the old code just proceeded with crappy values, but the
> new code hangs because it waits for the UIP bit to become low.
>
> Add a sanity check in the RTC CMOS probe function which reads the RTC_VALID
> register (Register D) which should have bit 0-6 cleared. If that's not the
> case then fail to register the CMOS.
>
> Add the same check to mc146818_get_time(), warn once when the condition
> is true and invalidate the rtc_time data.
>
> Reported-by: Micka?l Sala?n <[email protected]>
> Signed-off-by: Thomas Gleixner <[email protected]>
> Tested-by: Micka?l Sala?n <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
> ---
> V2: Fixed the sizeof() as spotted by Micka?l
> ---
> drivers/rtc/rtc-cmos.c | 8 ++++++++
> drivers/rtc/rtc-mc146818-lib.c | 7 +++++++
> 2 files changed, 15 insertions(+)
>
> --- a/drivers/rtc/rtc-cmos.c
> +++ b/drivers/rtc/rtc-cmos.c
> @@ -805,6 +805,14 @@ cmos_do_probe(struct device *dev, struct
>
> spin_lock_irq(&rtc_lock);
>
> + /* Ensure that the RTC is accessible. Bit 0-6 must be 0! */
> + if ((CMOS_READ(RTC_VALID) & 0x7f) != 0) {
> + spin_unlock_irq(&rtc_lock);
> + dev_warn(dev, "not accessible\n");
> + retval = -ENXIO;
> + goto cleanup1;
> + }
> +
> if (!(flags & CMOS_RTC_FLAGS_NOFREQ)) {
> /* force periodic irq to CMOS reset default of 1024Hz;
> *
> --- a/drivers/rtc/rtc-mc146818-lib.c
> +++ b/drivers/rtc/rtc-mc146818-lib.c
> @@ -21,6 +21,13 @@ unsigned int mc146818_get_time(struct rt
>
> again:
> spin_lock_irqsave(&rtc_lock, flags);
> + /* Ensure that the RTC is accessible. Bit 0-6 must be 0! */
> + if (WARN_ON_ONCE((CMOS_READ(RTC_VALID) & 0x7f) != 0)) {
> + spin_unlock_irqrestore(&rtc_lock, flags);
> + memset(time, 0xff, sizeof(*time));
> + return 0;
> + }
> +
> /*
> * Check whether there is an update in progress during which the
> * readout is unspecified. The maximum update time is ~2ms. Poll
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com