From: jiangkunkun <[email protected]>
When altering a translation table descriptor of some specific reasons,
we require break-before-make procedure. But it might cause problems when
the TTD is alive. The I/O streams might not tolerate translation faults.
If the SMMU supports BBML level 1 or BBML level 2, we can change the block
size without using break-before-make.
This adds feature detection for BBML, none functional change.
Co-developed-by: Keqian Zhu <[email protected]>
Signed-off-by: Kunkun Jiang <[email protected]>
---
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 24 ++++++++++++++++++++-
drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 6 ++++++
include/linux/io-pgtable.h | 1 +
3 files changed, 30 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
index 8cc9d7536b08..9208881a571c 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
@@ -1947,7 +1947,7 @@ static int arm_smmu_domain_finalise_s2(struct arm_smmu_domain *smmu_domain,
static int arm_smmu_domain_finalise(struct iommu_domain *domain,
struct arm_smmu_master *master)
{
- int ret;
+ int ret, bbml;
unsigned long ias, oas;
enum io_pgtable_fmt fmt;
struct io_pgtable_cfg pgtbl_cfg;
@@ -1988,12 +1988,20 @@ static int arm_smmu_domain_finalise(struct iommu_domain *domain,
return -EINVAL;
}
+ if (smmu->features & ARM_SMMU_FEAT_BBML2)
+ bbml = 2;
+ else if (smmu->features & ARM_SMMU_FEAT_BBML1)
+ bbml = 1;
+ else
+ bbml = 0;
+
pgtbl_cfg = (struct io_pgtable_cfg) {
.pgsize_bitmap = smmu->pgsize_bitmap,
.ias = ias,
.oas = oas,
.httu_hd = smmu->features & ARM_SMMU_FEAT_HTTU_HD,
.coherent_walk = smmu->features & ARM_SMMU_FEAT_COHERENCY,
+ .bbml = bbml,
.tlb = &arm_smmu_flush_ops,
.iommu_dev = smmu->dev,
};
@@ -3328,6 +3336,20 @@ static int arm_smmu_device_hw_probe(struct arm_smmu_device *smmu)
/* IDR3 */
reg = readl_relaxed(smmu->base + ARM_SMMU_IDR3);
+ switch (FIELD_GET(IDR3_BBML, reg)) {
+ case IDR3_BBML0:
+ break;
+ case IDR3_BBML1:
+ smmu->features |= ARM_SMMU_FEAT_BBML1;
+ break;
+ case IDR3_BBML2:
+ smmu->features |= ARM_SMMU_FEAT_BBML2;
+ break;
+ default:
+ dev_err(smmu->dev, "unknown/unsupported BBM behavior level\n");
+ return -ENXIO;
+ }
+
if (FIELD_GET(IDR3_RIL, reg))
smmu->features |= ARM_SMMU_FEAT_RANGE_INV;
diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
index e91bea44519e..11e526ab7239 100644
--- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
+++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
@@ -55,6 +55,10 @@
#define IDR1_SIDSIZE GENMASK(5, 0)
#define ARM_SMMU_IDR3 0xc
+#define IDR3_BBML GENMASK(12, 11)
+#define IDR3_BBML0 0
+#define IDR3_BBML1 1
+#define IDR3_BBML2 2
#define IDR3_RIL (1 << 10)
#define ARM_SMMU_IDR5 0x14
@@ -612,6 +616,8 @@ struct arm_smmu_device {
#define ARM_SMMU_FEAT_SVA (1 << 17)
#define ARM_SMMU_FEAT_HTTU_HA (1 << 18)
#define ARM_SMMU_FEAT_HTTU_HD (1 << 19)
+#define ARM_SMMU_FEAT_BBML1 (1 << 20)
+#define ARM_SMMU_FEAT_BBML2 (1 << 21)
u32 features;
#define ARM_SMMU_OPT_SKIP_PREFETCH (1 << 0)
diff --git a/include/linux/io-pgtable.h b/include/linux/io-pgtable.h
index 1a00ea8562c7..26583beeb5d9 100644
--- a/include/linux/io-pgtable.h
+++ b/include/linux/io-pgtable.h
@@ -99,6 +99,7 @@ struct io_pgtable_cfg {
unsigned int oas;
bool httu_hd;
bool coherent_walk;
+ int bbml;
const struct iommu_flush_ops *tlb;
struct device *iommu_dev;
--
2.19.1