This patch set provides ACPI support to DPAA2 network drivers.
It also introduces new fwnode based APIs to support phylink and phy
layers
Following functions are defined:
phylink_fwnode_phy_connect()
fwnode_mdiobus_register_phy()
fwnode_mdiobus_register()
fwnode_get_phy_id()
fwnode_phy_find_device()
device_phy_find_device()
fwnode_get_phy_node()
fwnode_mdio_find_device()
acpi_get_local_address()
First one helps in connecting phy to phylink instance.
Next three helps in getting phy_id and registering phy to mdiobus
Next two help in finding a phy on a mdiobus.
Next one helps in getting phy_node from a fwnode.
Last one is used to get local address from _ADR object.
Corresponding OF functions are refactored.
Tested-on: T2080RDB, LS1046ARDB, LS2088ARDB and LX2160ARDB
Changes in v5:
- More cleanup
- Replace fwnode_get_id() with acpi_get_local_address()
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
- replace fwnode_get_id() with OF and ACPI function calls
Changes in v4:
- More cleanup
- Improve code structure to handle all cases
- Remove redundant else from fwnode_mdiobus_register()
- Cleanup xgmac_mdio_probe()
- call phy_device_free() before returning
Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h
Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions
Calvin Johnson (15):
Documentation: ACPI: DSD: Document MDIO PHY
net: phy: Introduce fwnode_mdio_find_device()
net: phy: Introduce phy related fwnode functions
of: mdio: Refactor of_phy_find_device()
net: phy: Introduce fwnode_get_phy_id()
of: mdio: Refactor of_get_phy_id()
net: mdiobus: Introduce fwnode_mdiobus_register_phy()
of: mdio: Refactor of_mdiobus_register_phy()
ACPI: utils: Introduce acpi_get_local_address()
net: mdio: Add ACPI support code for mdio
net: mdiobus: Introduce fwnode_mdiobus_register()
net/fsl: Use fwnode_mdiobus_register()
phylink: introduce phylink_fwnode_phy_connect()
net: phylink: Refactor phylink_of_phy_connect()
net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
MAINTAINERS | 1 +
drivers/acpi/utils.c | 14 ++
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 91 +++++++-----
drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +-
drivers/net/mdio/Kconfig | 7 +
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/acpi_mdio.c | 51 +++++++
drivers/net/mdio/of_mdio.c | 79 +----------
drivers/net/phy/mdio_bus.c | 86 +++++++++++
drivers/net/phy/phy_device.c | 106 ++++++++++++++
drivers/net/phy/phylink.c | 53 ++++---
include/linux/acpi.h | 7 +
include/linux/acpi_mdio.h | 27 ++++
include/linux/mdio.h | 2 +
include/linux/of_mdio.h | 6 +-
include/linux/phy.h | 32 +++++
include/linux/phylink.h | 3 +
18 files changed, 578 insertions(+), 132 deletions(-)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
create mode 100644 drivers/net/mdio/acpi_mdio.c
create mode 100644 include/linux/acpi_mdio.h
--
2.17.1
Extract phy_id from compatible string. This will be used by
fwnode_mdiobus_register_phy() to create phy device using the
phy_id.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- Use traditional comparison pattern
- Use GENMASK
Changes in v2: None
drivers/net/phy/phy_device.c | 21 +++++++++++++++++++++
include/linux/phy.h | 5 +++++
2 files changed, 26 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 66e779cd905a..6ebb67a19e69 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -846,6 +846,27 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
return 0;
}
+/* Extract the phy ID from the compatible string of the form
+ * ethernet-phy-idAAAA.BBBB.
+ */
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+ unsigned int upper, lower;
+ const char *cp;
+ int ret;
+
+ ret = fwnode_property_read_string(fwnode, "compatible", &cp);
+ if (ret)
+ return ret;
+
+ if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) != 2)
+ return -EINVAL;
+
+ *phy_id = ((upper & GENMASK(15, 0)) << 16) | (lower & GENMASK(15, 0));
+ return 0;
+}
+EXPORT_SYMBOL(fwnode_get_phy_id);
+
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device
* struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index dee7064ea4eb..957ce3c9b058 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1349,6 +1349,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
bool is_c45,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
+int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id);
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
struct phy_device *device_phy_find_device(struct device *dev);
@@ -1357,6 +1358,10 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
#else
+static inline int fwnode_get_phy_id(struct fwnode_handle *fwnode, u32 *phy_id)
+{
+ return 0;
+}
static inline
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
{
--
2.17.1
Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
provide them to be connected to MAC.
Describe properties "phy-handle" and "phy-mode".
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5:
- More cleanup
Changes in v4:
- More cleanup
Changes in v3: None
Changes in v2:
- Updated with more description in document
Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
1 file changed, 133 insertions(+)
create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
new file mode 100644
index 000000000000..e1e99cae5eb2
--- /dev/null
+++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+MDIO bus and PHYs in ACPI
+=========================
+
+The PHYs on an MDIO bus [1] are probed and registered using
+fwnode_mdiobus_register_phy().
+
+Later, for connecting these PHYs to MAC, the PHYs registered on the
+MDIO bus have to be referenced.
+
+This document introduces two _DSD properties that are to be used
+for connecting PHYs on the MDIO bus [3] to the MAC layer.
+
+These properties are defined in accordance with the "Device
+Properties UUID For _DSD" [2] document and the
+daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
+Data Descriptors containing them.
+
+phy-handle
+----------
+For each MAC node, a device property "phy-handle" is used to reference
+the PHY that is registered on an MDIO bus. This is mandatory for
+network interfaces that have PHYs connected to MAC via MDIO bus.
+
+During the MDIO bus driver initialization, PHYs on this bus are probed
+using the _ADR object as shown below and are registered on the MDIO bus.
+
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+Later, during the MAC driver initialization, the registered PHY devices
+have to be retrieved from the MDIO bus. For this, the MAC driver need
+references to the previously registered PHYs which are provided
+as device object references (e.g. \_SB.MDI0.PHY1).
+
+phy-mode
+--------
+The "phy-mode" _DSD property is used to describe the connection to
+the PHY. The valid values for "phy-mode" are defined in [4].
+
+The following ASL example illustrates the usage of these properties.
+
+DSDT entry for MDIO node
+------------------------
+
+The MDIO bus has an SoC component (MDIO controller) and a platform
+component (PHYs on the MDIO bus).
+
+a) Silicon Component
+This node describes the MDIO controller, MDI0
+---------------------------------------------
+::
+ Scope(_SB)
+ {
+ Device(MDI0) {
+ Name(_HID, "NXP0006")
+ Name(_CCA, 1)
+ Name(_UID, 0)
+ Name(_CRS, ResourceTemplate() {
+ Memory32Fixed(ReadWrite, MDI0_BASE, MDI_LEN)
+ Interrupt(ResourceConsumer, Level, ActiveHigh, Shared)
+ {
+ MDI0_IT
+ }
+ }) // end of _CRS for MDI0
+ } // end of MDI0
+ }
+
+b) Platform Component
+The PHY1 and PHY2 nodes represent the PHYs connected to MDIO bus MDI0
+---------------------------------------------------------------------
+::
+ Scope(\_SB.MDI0)
+ {
+ Device(PHY1) {
+ Name (_ADR, 0x1)
+ } // end of PHY1
+
+ Device(PHY2) {
+ Name (_ADR, 0x2)
+ } // end of PHY2
+ }
+
+DSDT entries representing MAC nodes
+-----------------------------------
+
+Below are the MAC nodes where PHY nodes are referenced.
+phy-mode and phy-handle are used as explained earlier.
+------------------------------------------------------
+::
+ Scope(\_SB.MCE0.PR17)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY1}
+ }
+ })
+ }
+
+ Scope(\_SB.MCE0.PR18)
+ {
+ Name (_DSD, Package () {
+ ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+ Package () {
+ Package (2) {"phy-mode", "rgmii-id"},
+ Package (2) {"phy-handle", \_SB.MDI0.PHY2}}
+ }
+ })
+ }
+
+References
+==========
+
+[1] Documentation/networking/phy.rst
+
+[2] https://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
+
+[3] Documentation/firmware-guide/acpi/DSD-properties-rules.rst
+
+[4] Documentation/devicetree/bindings/net/ethernet-controller.yaml
--
2.17.1
With the introduction of fwnode_get_phy_id(), refactor of_get_phy_id()
to use fwnode equivalent.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/mdio/of_mdio.c | 12 +-----------
1 file changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 94ec421dd91b..d4cc293358f7 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -29,17 +29,7 @@ MODULE_LICENSE("GPL");
* ethernet-phy-idAAAA.BBBB */
static int of_get_phy_id(struct device_node *device, u32 *phy_id)
{
- struct property *prop;
- const char *cp;
- unsigned int upper, lower;
-
- of_property_for_each_string(device, "compatible", prop, cp) {
- if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) {
- *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF);
- return 0;
- }
- }
- return -EINVAL;
+ return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
}
static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
--
2.17.1
Define fwnode_mdio_find_device() to get a pointer to the
mdio_device from fwnode passed to the function.
Refactor of_mdio_find_device() to use fwnode_mdio_find_device().
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/mdio/of_mdio.c | 11 +----------
drivers/net/phy/phy_device.c | 23 +++++++++++++++++++++++
include/linux/phy.h | 6 ++++++
3 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 4daf94bb56a5..7bd33b930116 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -347,16 +347,7 @@ EXPORT_SYMBOL(of_mdiobus_register);
*/
struct mdio_device *of_mdio_find_device(struct device_node *np)
{
- struct device *d;
-
- if (!np)
- return NULL;
-
- d = bus_find_device_by_of_node(&mdio_bus_type, np);
- if (!d)
- return NULL;
-
- return to_mdio_device(d);
+ return fwnode_mdio_find_device(of_fwnode_handle(np));
}
EXPORT_SYMBOL(of_mdio_find_device);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8447e56ba572..06e0ddcca8c9 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2829,6 +2829,29 @@ static bool phy_drv_supports_irq(struct phy_driver *phydrv)
return phydrv->config_intr && phydrv->handle_interrupt;
}
+/**
+ * fwnode_mdio_find_device - Given a fwnode, find the mdio_device
+ * @np: pointer to the mdio_device's fwnode
+ *
+ * If successful, returns a pointer to the mdio_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ * The caller should call put_device() on the mdio_device after its use
+ */
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+ struct device *d;
+
+ if (!fwnode)
+ return NULL;
+
+ d = bus_find_device_by_fwnode(&mdio_bus_type, fwnode);
+ if (!d)
+ return NULL;
+
+ return to_mdio_device(d);
+}
+EXPORT_SYMBOL(fwnode_mdio_find_device);
+
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
diff --git a/include/linux/phy.h b/include/linux/phy.h
index bc323fbdd21e..8314051d384a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1349,11 +1349,17 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
bool is_c45,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
#else
static inline
+struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
+{
+ return 0;
+}
+static inline
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
return NULL;
--
2.17.1
Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4:
- call phy_device_free() before returning
Changes in v3: None
Changes in v2: None
drivers/net/phy/phylink.c | 56 +++++++++++++++++++++++++++++++++++++++
include/linux/phylink.h | 3 +++
2 files changed, 59 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 84f6e197f965..5466e1e6272a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2015 Russell King
*/
+#include <linux/acpi.h>
#include <linux/ethtool.h>
#include <linux/export.h>
#include <linux/gpio/consumer.h>
@@ -1120,6 +1121,61 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
}
EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags)
+{
+ struct fwnode_handle *phy_fwnode;
+ struct phy_device *phy_dev;
+ int ret;
+
+ if (is_of_node(fwnode)) {
+ /* Fixed links and 802.3z are handled without needing a PHY */
+ if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ phy_interface_mode_is_8023z(pl->link_interface)))
+ return 0;
+ }
+
+ phy_fwnode = fwnode_get_phy_node(fwnode);
+ if (IS_ERR(phy_fwnode)) {
+ if (pl->cfg_link_an_mode == MLO_AN_PHY)
+ return -ENODEV;
+ return 0;
+ }
+
+ phy_dev = fwnode_phy_find_device(phy_fwnode);
+ /* We're done with the phy_node handle */
+ fwnode_handle_put(phy_fwnode);
+ if (!phy_dev)
+ return -ENODEV;
+
+ ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+ pl->link_interface);
+ if (ret) {
+ phy_device_free(phy_dev);
+ return ret;
+ }
+
+ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ if (ret)
+ phy_detach(phy_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
/**
* phylink_disconnect_phy() - disconnect any PHY attached to the phylink
* instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d81a714cfbbd..75d4f99090fd 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -439,6 +439,9 @@ void phylink_destroy(struct phylink *);
int phylink_connect_phy(struct phylink *, struct phy_device *);
int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+ struct fwnode_handle *fwnode,
+ u32 flags);
void phylink_disconnect_phy(struct phylink *);
void phylink_mac_change(struct phylink *, bool up);
--
2.17.1
Define fwnode_phy_find_device() to iterate an mdiobus and find the
phy device of the provided phy fwnode. Additionally define
device_phy_find_device() to find phy device of provided device.
Define fwnode_get_phy_node() to get phy_node using named reference.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
Changes in v2:
- use reverse christmas tree ordering for local variables
drivers/net/phy/phy_device.c | 62 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 20 ++++++++++++
2 files changed, 82 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 06e0ddcca8c9..66e779cd905a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -9,6 +9,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/acpi.h>
#include <linux/bitmap.h>
#include <linux/delay.h>
#include <linux/errno.h>
@@ -2852,6 +2853,67 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
}
EXPORT_SYMBOL(fwnode_mdio_find_device);
+/**
+ * fwnode_phy_find_device - For provided phy_fwnode, find phy_device.
+ *
+ * @phy_fwnode: Pointer to the phy's fwnode.
+ *
+ * If successful, returns a pointer to the phy_device with the embedded
+ * struct device refcount incremented by one, or NULL on failure.
+ */
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+ struct mdio_device *mdiodev;
+
+ mdiodev = fwnode_mdio_find_device(phy_fwnode);
+ if (!mdiodev)
+ return NULL;
+
+ if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
+ return to_phy_device(&mdiodev->dev);
+
+ put_device(&mdiodev->dev);
+
+ return NULL;
+}
+EXPORT_SYMBOL(fwnode_phy_find_device);
+
+/**
+ * device_phy_find_device - For the given device, get the phy_device
+ * @dev: Pointer to the given device
+ *
+ * Refer return conditions of fwnode_phy_find_device().
+ */
+struct phy_device *device_phy_find_device(struct device *dev)
+{
+ return fwnode_phy_find_device(dev_fwnode(dev));
+}
+EXPORT_SYMBOL_GPL(device_phy_find_device);
+
+/**
+ * fwnode_get_phy_node - Get the phy_node using the named reference.
+ * @fwnode: Pointer to fwnode from which phy_node has to be obtained.
+ *
+ * Refer return conditions of fwnode_find_reference().
+ * For ACPI, only "phy-handle" is supported. Legacy DT properties "phy"
+ * and "phy-device" are not supported in ACPI. DT supports all the three
+ * named references to the phy node.
+ */
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *phy_node;
+
+ /* Only phy-handle is used for ACPI */
+ phy_node = fwnode_find_reference(fwnode, "phy-handle", 0);
+ if (is_acpi_node(fwnode) || !IS_ERR(phy_node))
+ return phy_node;
+ phy_node = fwnode_find_reference(fwnode, "phy", 0);
+ if (IS_ERR(phy_node))
+ phy_node = fwnode_find_reference(fwnode, "phy-device", 0);
+ return phy_node;
+}
+EXPORT_SYMBOL_GPL(fwnode_get_phy_node);
+
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8314051d384a..dee7064ea4eb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1350,6 +1350,9 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
struct phy_c45_device_ids *c45_ids);
#if IS_ENABLED(CONFIG_PHYLIB)
struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode);
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode);
+struct phy_device *device_phy_find_device(struct device *dev);
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode);
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
void phy_device_free(struct phy_device *phydev);
@@ -1359,6 +1362,23 @@ struct mdio_device *fwnode_mdio_find_device(struct fwnode_handle *fwnode)
{
return 0;
}
+static inline
+struct phy_device *fwnode_phy_find_device(struct fwnode_handle *phy_fwnode)
+{
+ return NULL;
+}
+
+static inline struct phy_device *device_phy_find_device(struct device *dev)
+{
+ return NULL;
+}
+
+static inline
+struct fwnode_handle *fwnode_get_phy_node(struct fwnode_handle *fwnode)
+{
+ return NULL;
+}
+
static inline
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
--
2.17.1
Refactor of_phy_find_device() to use fwnode_phy_find_device().
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/mdio/of_mdio.c | 13 +------------
1 file changed, 1 insertion(+), 12 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 7bd33b930116..94ec421dd91b 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -360,18 +360,7 @@ EXPORT_SYMBOL(of_mdio_find_device);
*/
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
- struct mdio_device *mdiodev;
-
- mdiodev = of_mdio_find_device(phy_np);
- if (!mdiodev)
- return NULL;
-
- if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY)
- return to_phy_device(&mdiodev->dev);
-
- put_device(&mdiodev->dev);
-
- return NULL;
+ return fwnode_phy_find_device(of_fwnode_handle(phy_np));
}
EXPORT_SYMBOL(of_phy_find_device);
--
2.17.1
Introduce a wrapper around the _ADR evaluation.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5:
- Replace fwnode_get_id() with acpi_get_local_address()
Changes in v4:
- Improve code structure to handle all cases
Changes in v3:
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
Changes in v2: None
drivers/acpi/utils.c | 14 ++++++++++++++
include/linux/acpi.h | 7 +++++++
2 files changed, 21 insertions(+)
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index d5411a166685..0d3a2b111c0f 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -296,6 +296,20 @@ acpi_evaluate_integer(acpi_handle handle,
EXPORT_SYMBOL(acpi_evaluate_integer);
+int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+ unsigned long long adr;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &adr);
+ if (ACPI_FAILURE(status))
+ return -ENODATA;
+
+ *addr = (u32)adr;
+ return 0;
+}
+EXPORT_SYMBOL(acpi_get_local_address);
+
acpi_status
acpi_evaluate_reference(acpi_handle handle,
acpi_string pathname,
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 053bf05fb1f7..4e5ce2b4a69d 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -699,6 +699,8 @@ static inline u64 acpi_arch_get_root_pointer(void)
}
#endif
+int acpi_get_local_address(acpi_handle handle, u32 *addr);
+
#else /* !CONFIG_ACPI */
#define acpi_disabled 1
@@ -946,6 +948,11 @@ static inline struct acpi_device *acpi_resource_consumer(struct resource *res)
return NULL;
}
+static inline int acpi_get_local_address(acpi_handle handle, u32 *addr)
+{
+ return -ENODEV;
+}
+
#endif /* !CONFIG_ACPI */
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
--
2.17.1
Introduce fwnode_mdiobus_register_phy() to register PHYs on the
mdiobus. From the compatible string, identify whether the PHY is
c45 and based on this create a PHY device instance which is
registered on the mdiobus.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/mdio/of_mdio.c | 3 +-
drivers/net/phy/mdio_bus.c | 65 ++++++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 2 ++
include/linux/of_mdio.h | 6 +++-
4 files changed, 74 insertions(+), 2 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index d4cc293358f7..cd7da38ae763 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -32,7 +32,7 @@ static int of_get_phy_id(struct device_node *device, u32 *phy_id)
return fwnode_get_phy_id(of_fwnode_handle(device), phy_id);
}
-static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
{
struct of_phandle_args arg;
int err;
@@ -49,6 +49,7 @@ static struct mii_timestamper *of_find_mii_timestamper(struct device_node *node)
return register_mii_timestamper(arg.np, arg.args[0]);
}
+EXPORT_SYMBOL(of_find_mii_timestamper);
int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
struct device_node *child, u32 addr)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 823518554079..33d1667fdeca 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -8,6 +8,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -106,6 +107,70 @@ int mdiobus_unregister_device(struct mdio_device *mdiodev)
}
EXPORT_SYMBOL(mdiobus_unregister_device);
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+ struct fwnode_handle *child, u32 addr)
+{
+ struct mii_timestamper *mii_ts;
+ struct phy_device *phy;
+ bool is_c45 = false;
+ u32 phy_id;
+ int rc;
+
+ if (is_of_node(child)) {
+ mii_ts = of_find_mii_timestamper(to_of_node(child));
+ if (IS_ERR(mii_ts))
+ return PTR_ERR(mii_ts);
+ }
+
+ rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
+ if (rc >= 0)
+ is_c45 = true;
+
+ if (is_c45 || fwnode_get_phy_id(child, &phy_id))
+ phy = get_phy_device(bus, addr, is_c45);
+ else
+ phy = phy_device_create(bus, addr, phy_id, 0, NULL);
+ if (IS_ERR(phy)) {
+ if (mii_ts && is_of_node(child))
+ unregister_mii_timestamper(mii_ts);
+ return PTR_ERR(phy);
+ }
+
+ if (is_acpi_node(child)) {
+ phy->irq = bus->irq[addr];
+
+ /* Associate the fwnode with the device structure so it
+ * can be looked up later.
+ */
+ phy->mdio.dev.fwnode = child;
+
+ /* All data is now stored in the phy struct, so register it */
+ rc = phy_device_register(phy);
+ if (rc) {
+ phy_device_free(phy);
+ fwnode_handle_put(phy->mdio.dev.fwnode);
+ return rc;
+ }
+ } else if (is_of_node(child)) {
+ rc = of_mdiobus_phy_device_register(bus, phy, to_of_node(child), addr);
+ if (rc) {
+ if (mii_ts)
+ unregister_mii_timestamper(mii_ts);
+ phy_device_free(phy);
+ return rc;
+ }
+
+ /* phy->mii_ts may already be defined by the PHY driver. A
+ * mii_timestamper probed via the device tree will still have
+ * precedence.
+ */
+ if (mii_ts)
+ phy->mii_ts = mii_ts;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register_phy);
+
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr)
{
struct mdio_device *mdiodev = bus->mdio_map[addr];
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ffb787d5ebde..7f4215c069fe 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -381,6 +381,8 @@ int mdiobus_register_device(struct mdio_device *mdiodev);
int mdiobus_unregister_device(struct mdio_device *mdiodev);
bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
+int fwnode_mdiobus_register_phy(struct mii_bus *bus,
+ struct fwnode_handle *child, u32 addr);
/**
* mdio_module_driver() - Helper macro for registering mdio drivers
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index cfe8c607a628..3b66016f18aa 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -34,6 +34,7 @@ struct mii_bus *of_mdio_find_bus(struct device_node *mdio_np);
int of_phy_register_fixed_link(struct device_node *np);
void of_phy_deregister_fixed_link(struct device_node *np);
bool of_phy_is_fixed_link(struct device_node *np);
+struct mii_timestamper *of_find_mii_timestamper(struct device_node *np);
int of_mdiobus_phy_device_register(struct mii_bus *mdio, struct phy_device *phy,
struct device_node *child, u32 addr);
@@ -128,7 +129,10 @@ static inline bool of_phy_is_fixed_link(struct device_node *np)
{
return false;
}
-
+static inline struct mii_timestamper *of_find_mii_timestamper(struct device_node *np)
+{
+ return NULL;
+}
static inline int of_mdiobus_phy_device_register(struct mii_bus *mdio,
struct phy_device *phy,
struct device_node *child, u32 addr)
--
2.17.1
Refactor of_mdiobus_register_phy() to use fwnode_mdiobus_register_phy().
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/mdio/of_mdio.c | 40 +-------------------------------------
1 file changed, 1 insertion(+), 39 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index cd7da38ae763..1b561849269e 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -98,45 +98,7 @@ EXPORT_SYMBOL(of_mdiobus_phy_device_register);
static int of_mdiobus_register_phy(struct mii_bus *mdio,
struct device_node *child, u32 addr)
{
- struct mii_timestamper *mii_ts;
- struct phy_device *phy;
- bool is_c45;
- int rc;
- u32 phy_id;
-
- mii_ts = of_find_mii_timestamper(child);
- if (IS_ERR(mii_ts))
- return PTR_ERR(mii_ts);
-
- is_c45 = of_device_is_compatible(child,
- "ethernet-phy-ieee802.3-c45");
-
- if (!is_c45 && !of_get_phy_id(child, &phy_id))
- phy = phy_device_create(mdio, addr, phy_id, 0, NULL);
- else
- phy = get_phy_device(mdio, addr, is_c45);
- if (IS_ERR(phy)) {
- if (mii_ts)
- unregister_mii_timestamper(mii_ts);
- return PTR_ERR(phy);
- }
-
- rc = of_mdiobus_phy_device_register(mdio, phy, child, addr);
- if (rc) {
- if (mii_ts)
- unregister_mii_timestamper(mii_ts);
- phy_device_free(phy);
- return rc;
- }
-
- /* phy->mii_ts may already be defined by the PHY driver. A
- * mii_timestamper probed via the device tree will still have
- * precedence.
- */
- if (mii_ts)
- phy->mii_ts = mii_ts;
-
- return 0;
+ return fwnode_mdiobus_register_phy(mdio, of_fwnode_handle(child), addr);
}
static int of_mdiobus_register_device(struct mii_bus *mdio,
--
2.17.1
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
each ACPI child node.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5:
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
Changes in v4: None
Changes in v3: None
Changes in v2: None
MAINTAINERS | 1 +
drivers/net/mdio/Kconfig | 7 +++++
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/acpi_mdio.c | 51 ++++++++++++++++++++++++++++++++++++
include/linux/acpi_mdio.h | 27 +++++++++++++++++++
5 files changed, 87 insertions(+)
create mode 100644 drivers/net/mdio/acpi_mdio.c
create mode 100644 include/linux/acpi_mdio.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 47a5e683ebfe..ead71f60607d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6669,6 +6669,7 @@ F: Documentation/devicetree/bindings/net/mdio*
F: Documentation/devicetree/bindings/net/qca,ar803x.yaml
F: Documentation/networking/phy.rst
F: drivers/net/mdio/
+F: drivers/net/mdio/acpi_mdio.c
F: drivers/net/mdio/of_mdio.c
F: drivers/net/pcs/
F: drivers/net/phy/
diff --git a/drivers/net/mdio/Kconfig b/drivers/net/mdio/Kconfig
index a10cc460d7cf..df6bb7837d6a 100644
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -27,6 +27,13 @@ config OF_MDIO
help
OpenFirmware MDIO bus (Ethernet PHY) accessors
+config ACPI_MDIO
+ def_tristate PHYLIB
+ depends on ACPI
+ depends on PHYLIB
+ help
+ ACPI MDIO bus (Ethernet PHY) accessors
+
if MDIO_BUS
config MDIO_DEVRES
diff --git a/drivers/net/mdio/Makefile b/drivers/net/mdio/Makefile
index 5c498dde463f..2373ade8af13 100644
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
@@ -2,6 +2,7 @@
# Makefile for Linux MDIO bus drivers
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o
obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
diff --git a/drivers/net/mdio/acpi_mdio.c b/drivers/net/mdio/acpi_mdio.c
new file mode 100644
index 000000000000..7859f2f3352b
--- /dev/null
+++ b/drivers/net/mdio/acpi_mdio.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ * This file provides helper functions for extracting PHY device information
+ * out of the ACPI ASL and using it to populate an mii_bus.
+ */
+
+#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
+
+MODULE_AUTHOR("Calvin Johnson <[email protected]>");
+MODULE_LICENSE("GPL");
+
+/**
+ * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
+ *
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function registers the mii_bus structure and registers a phy_device
+ * for each child node of @fwnode.
+ */
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ struct fwnode_handle *child;
+ u32 addr;
+ int ret;
+
+ /* Mask out all PHYs from auto probing. */
+ mdio->phy_mask = ~0;
+ ret = mdiobus_register(mdio);
+ if (ret)
+ return ret;
+
+ mdio->dev.fwnode = fwnode;
+/* Loop over the child nodes and register a phy_device for each PHY */
+ fwnode_for_each_child_node(fwnode, child) {
+ ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+ if ((ret) || addr >= PHY_MAX_ADDR)
+ continue;
+
+ ret = fwnode_mdiobus_register_phy(mdio, child, addr);
+ if (ret == -ENODEV)
+ dev_err(&mdio->dev,
+ "MDIO device at address %d is missing.\n",
+ addr);
+ }
+ return 0;
+}
+EXPORT_SYMBOL(acpi_mdiobus_register);
diff --git a/include/linux/acpi_mdio.h b/include/linux/acpi_mdio.h
new file mode 100644
index 000000000000..9be6f63cde8f
--- /dev/null
+++ b/include/linux/acpi_mdio.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ACPI helpers for the MDIO (Ethernet PHY) API
+ *
+ */
+
+#ifndef __LINUX_ACPI_MDIO_H
+#define __LINUX_ACPI_MDIO_H
+
+#include <linux/device.h>
+#include <linux/phy.h>
+
+#if IS_ENABLED(CONFIG_ACPI_MDIO)
+int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
+#else /* CONFIG_ACPI_MDIO */
+static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ /*
+ * Fall back to mdiobus_register() function to register a bus.
+ * This way, we don't have to keep compat bits around in drivers.
+ */
+
+ return mdiobus_register(mdio);
+}
+#endif
+
+#endif /* __LINUX_ACPI_MDIO_H */
--
2.17.1
fwnode_mdiobus_register() internally takes care of both DT
and ACPI cases to register mdiobus. Replace existing
of_mdiobus_register() with fwnode_mdiobus_register().
Note: For both ACPI and DT cases, endianness of MDIO controller
need to be specified using "little-endian" property.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4:
- Cleanup xgmac_mdio_probe()
Changes in v3:
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h
Changes in v2: None
drivers/net/ethernet/freescale/xgmac_mdio.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c
index bfa2826c5545..dca5305e7185 100644
--- a/drivers/net/ethernet/freescale/xgmac_mdio.c
+++ b/drivers/net/ethernet/freescale/xgmac_mdio.c
@@ -2,6 +2,7 @@
* QorIQ 10G MDIO Controller
*
* Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
*
* Authors: Andy Fleming <[email protected]>
* Timur Tabi <[email protected]>
@@ -243,10 +244,9 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
static int xgmac_mdio_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
- struct mii_bus *bus;
- struct resource *res;
struct mdio_fsl_priv *priv;
+ struct resource *res;
+ struct mii_bus *bus;
int ret;
/* In DPAA-1, MDIO is one of the many FMan sub-devices. The FMan
@@ -279,13 +279,16 @@ static int xgmac_mdio_probe(struct platform_device *pdev)
goto err_ioremap;
}
+ /* For both ACPI and DT cases, endianness of MDIO controller
+ * needs to be specified using "little-endian" property.
+ */
priv->is_little_endian = device_property_read_bool(&pdev->dev,
"little-endian");
priv->has_a011043 = device_property_read_bool(&pdev->dev,
"fsl,erratum-a011043");
- ret = of_mdiobus_register(bus, np);
+ ret = fwnode_mdiobus_register(bus, pdev->dev.fwnode);
if (ret) {
dev_err(&pdev->dev, "cannot register MDIO bus\n");
goto err_registration;
--
2.17.1
Refactor phylink_of_phy_connect() to use phylink_fwnode_phy_connect().
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/net/phy/phylink.c | 39 +--------------------------------------
1 file changed, 1 insertion(+), 38 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 5466e1e6272a..3d0dc53fd4f3 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1080,44 +1080,7 @@ EXPORT_SYMBOL_GPL(phylink_connect_phy);
int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
u32 flags)
{
- struct device_node *phy_node;
- struct phy_device *phy_dev;
- int ret;
-
- /* Fixed links and 802.3z are handled without needing a PHY */
- if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
- (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(pl->link_interface)))
- return 0;
-
- phy_node = of_parse_phandle(dn, "phy-handle", 0);
- if (!phy_node)
- phy_node = of_parse_phandle(dn, "phy", 0);
- if (!phy_node)
- phy_node = of_parse_phandle(dn, "phy-device", 0);
-
- if (!phy_node) {
- if (pl->cfg_link_an_mode == MLO_AN_PHY)
- return -ENODEV;
- return 0;
- }
-
- phy_dev = of_phy_find_device(phy_node);
- /* We're done with the phy_node handle */
- of_node_put(phy_node);
- if (!phy_dev)
- return -ENODEV;
-
- ret = phy_attach_direct(pl->netdev, phy_dev, flags,
- pl->link_interface);
- if (ret)
- return ret;
-
- ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
- if (ret)
- phy_detach(phy_dev);
-
- return ret;
+ return phylink_fwnode_phy_connect(pl, of_fwnode_handle(dn), flags);
}
EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
--
2.17.1
Modify dpaa2_mac_connect() to support ACPI along with DT.
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.
Replace of_get_phy_mode with fwnode_get_phy_mode to get
phy-mode for a dpmac_node.
Use helper function phylink_fwnode_phy_connect() to find phy_dev and
connect to mac->phylink.
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5:
- replace fwnode_get_id() with OF and ACPI function calls
Changes in v4: None
Changes in v3: None
Changes in v2:
- Refactor OF functions to use fwnode functions
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 91 +++++++++++--------
1 file changed, 54 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ccaf7e35abeb..87bb49722611 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */
+#include <linux/acpi.h>
+#include <linux/property.h>
+
#include "dpaa2-eth.h"
#include "dpaa2-mac.h"
@@ -34,39 +37,51 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
return 0;
}
-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+ u16 dpmac_id)
{
- struct device_node *dpmacs, *dpmac = NULL;
- u32 id;
+ struct fwnode_handle *parent, *child = NULL;
+ struct device_node *dpmacs = NULL;
int err;
+ u32 id;
- dpmacs = of_find_node_by_name(NULL, "dpmacs");
- if (!dpmacs)
- return NULL;
+ if (is_of_node(dev->parent->fwnode)) {
+ dpmacs = of_find_node_by_name(NULL, "dpmacs");
+ if (!dpmacs)
+ return NULL;
+ parent = of_fwnode_handle(dpmacs);
+ } else if (is_acpi_node(dev->parent->fwnode)) {
+ parent = dev->parent->fwnode;
+ }
- while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
- err = of_property_read_u32(dpmac, "reg", &id);
- if (err)
+ fwnode_for_each_child_node(parent, child) {
+ err = -EINVAL;
+ if (is_acpi_device_node(child))
+ err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+ else if (is_of_node(child))
+ err = of_property_read_u32(to_of_node(child), "reg", &id);
+ if (err) {
continue;
- if (id == dpmac_id)
- break;
+ } else if (id == dpmac_id) {
+ if (is_of_node(dev->parent->fwnode))
+ of_node_put(dpmacs);
+ return child;
+ }
}
-
- of_node_put(dpmacs);
-
- return dpmac;
+ if (is_of_node(dev->parent->fwnode))
+ of_node_put(dpmacs);
+ return NULL;
}
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
struct dpmac_attr attr)
{
phy_interface_t if_mode;
int err;
- err = of_get_phy_mode(node, &if_mode);
- if (!err)
- return if_mode;
+ err = fwnode_get_phy_mode(dpmac_node);
+ if (err > 0)
+ return err;
err = phy_mode(attr.eth_if, &if_mode);
if (!err)
@@ -235,26 +250,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
};
static int dpaa2_pcs_create(struct dpaa2_mac *mac,
- struct device_node *dpmac_node, int id)
+ struct fwnode_handle *dpmac_node,
+ int id)
{
struct mdio_device *mdiodev;
- struct device_node *node;
+ struct fwnode_handle *node;
- node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
- if (!node) {
+ node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+ if (IS_ERR(node)) {
/* do not error out on old DTS files */
netdev_warn(mac->net_dev, "pcs-handle node not found\n");
return 0;
}
- if (!of_device_is_available(node)) {
+ if (!of_device_is_available(to_of_node(node))) {
netdev_err(mac->net_dev, "pcs-handle node not available\n");
- of_node_put(node);
+ of_node_put(to_of_node(node));
return -ENODEV;
}
- mdiodev = of_mdio_find_device(node);
- of_node_put(node);
+ mdiodev = fwnode_mdio_find_device(node);
+ fwnode_handle_put(node);
if (!mdiodev)
return -EPROBE_DEFER;
@@ -283,13 +299,12 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
int dpaa2_mac_connect(struct dpaa2_mac *mac)
{
struct net_device *net_dev = mac->net_dev;
- struct device_node *dpmac_node;
+ struct fwnode_handle *dpmac_node = NULL;
struct phylink *phylink;
int err;
mac->if_link_type = mac->attr.link_type;
-
- dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+ dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
if (!dpmac_node) {
netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
return -ENODEV;
@@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
* error out if the interface mode requests them and there is no PHY
* to act upon them
*/
- if (of_phy_is_fixed_link(dpmac_node) &&
+ if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
(mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -327,7 +342,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
mac->phylink_config.type = PHYLINK_NETDEV;
phylink = phylink_create(&mac->phylink_config,
- of_fwnode_handle(dpmac_node), mac->if_mode,
+ dpmac_node, mac->if_mode,
&dpaa2_mac_phylink_ops);
if (IS_ERR(phylink)) {
err = PTR_ERR(phylink);
@@ -338,13 +353,14 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
if (mac->pcs)
phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
- err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
if (err) {
- netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
goto err_phylink_destroy;
}
- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);
return 0;
@@ -353,7 +369,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
err_pcs_destroy:
dpaa2_pcs_destroy(mac);
err_put_node:
- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);
return err;
}
--
2.17.1
Introduce fwnode_mdiobus_register() to register PHYs on the mdiobus.
If the fwnode is DT node, then call of_mdiobus_register().
If it is an ACPI node, then call acpi_mdiobus_register().
Signed-off-by: Calvin Johnson <[email protected]>
---
Changes in v5: None
Changes in v4:
- Remove redundant else from fwnode_mdiobus_register()
Changes in v3:
- Use acpi_mdiobus_register()
Changes in v2: None
drivers/net/phy/mdio_bus.c | 21 +++++++++++++++++++++
include/linux/phy.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 33d1667fdeca..c597dd41695d 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -9,6 +9,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/acpi.h>
+#include <linux/acpi_mdio.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
@@ -566,6 +567,26 @@ static int mdiobus_create_device(struct mii_bus *bus,
return ret;
}
+/**
+ * fwnode_mdiobus_register - Register mii_bus and create PHYs from fwnode
+ * @mdio: pointer to mii_bus structure
+ * @fwnode: pointer to fwnode of MDIO bus.
+ *
+ * This function returns of_mdiobus_register() for DT and
+ * acpi_mdiobus_register() for ACPI.
+ */
+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
+{
+ if (is_of_node(fwnode))
+ return of_mdiobus_register(mdio, to_of_node(fwnode));
+
+ if (is_acpi_node(fwnode))
+ return acpi_mdiobus_register(mdio, fwnode);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(fwnode_mdiobus_register);
+
/**
* __mdiobus_register - bring up all the PHYs on a given bus and attach them to bus
* @bus: target mii_bus
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 957ce3c9b058..765e1844cfdb 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -387,6 +387,7 @@ static inline struct mii_bus *mdiobus_alloc(void)
return mdiobus_alloc_size(0);
}
+int fwnode_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
int __mdiobus_register(struct mii_bus *bus, struct module *owner);
int __devm_mdiobus_register(struct device *dev, struct mii_bus *bus,
struct module *owner);
--
2.17.1
On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> + struct fwnode_handle *fwnode,
> + u32 flags)
> +{
> + struct fwnode_handle *phy_fwnode;
> + struct phy_device *phy_dev;
> + int ret;
> +
> + if (is_of_node(fwnode)) {
> + /* Fixed links and 802.3z are handled without needing a PHY */
> + if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> + (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> + phy_interface_mode_is_8023z(pl->link_interface)))
> + return 0;
This difference between ACPI and DT really needs to be described in the
commit description.
For example, why is it acceptable to have a PHY in fixed-link mode if
we're using ACPI, and not DT?
If we look at the phylink code, accepting a PHY when in fixed-link mode
is basically not supported... so why should ACPI allow this?
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
On Mon, Feb 8, 2021 at 5:14 PM Calvin Johnson
<[email protected]> wrote:
>
> Define acpi_mdiobus_register() to Register mii_bus and create PHYs for
> each ACPI child node.
...
> +/**
> + * acpi_mdiobus_register - Register mii_bus and create PHYs from the ACPI ASL.
> + *
Redundant blank line.
> + * @mdio: pointer to mii_bus structure
> + * @fwnode: pointer to fwnode of MDIO bus.
> + *
> + * This function registers the mii_bus structure and registers a phy_device
> + * for each child node of @fwnode.
> + */
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> + struct fwnode_handle *child;
> + u32 addr;
> + int ret;
> +
> + /* Mask out all PHYs from auto probing. */
> + mdio->phy_mask = ~0;
I would rather see GENMASK(31, 0) here because in case the type of the
variable is changed we will need to amend this anyway.
> + ret = mdiobus_register(mdio);
> + if (ret)
> + return ret;
> + mdio->dev.fwnode = fwnode;
Shouldn't it be rather ACPI_SET_COMPANION() as other bus / drivers do?
> +/* Loop over the child nodes and register a phy_device for each PHY */
Indentation.
> + fwnode_for_each_child_node(fwnode, child) {
> + ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
> + if ((ret) || addr >= PHY_MAX_ADDR)
Too many parentheses.
> + continue;
> +
> + ret = fwnode_mdiobus_register_phy(mdio, child, addr);
> + if (ret == -ENODEV)
> + dev_err(&mdio->dev,
> + "MDIO device at address %d is missing.\n",
> + addr);
> + }
> + return 0;
> +}
...
> +/*
> + * ACPI helpers for the MDIO (Ethernet PHY) API
> + *
> + */
It's one line AFAICT!
...
> +#include <linux/device.h>
> +#include <linux/phy.h>
This seems a bit inconsistent with the below.
I see the user of mdiobus_register(). It's the only header should be
included. Everything else would be forward declared like
struct fwnode_handle;
> +#if IS_ENABLED(CONFIG_ACPI_MDIO)
> +int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode);
> +#else /* CONFIG_ACPI_MDIO */
> +static inline int acpi_mdiobus_register(struct mii_bus *mdio, struct fwnode_handle *fwnode)
> +{
> + /*
> + * Fall back to mdiobus_register() function to register a bus.
> + * This way, we don't have to keep compat bits around in drivers.
> + */
> +
> + return mdiobus_register(mdio);
> +}
> +#endif
--
With Best Regards,
Andy Shevchenko
On Mon, Feb 8, 2021 at 5:15 PM Calvin Johnson
<[email protected]> wrote:
>
> Modify dpaa2_mac_connect() to support ACPI along with DT.
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> DT or ACPI.
>
> Replace of_get_phy_mode with fwnode_get_phy_mode to get
> phy-mode for a dpmac_node.
>
> Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> connect to mac->phylink.
...
> + if (is_of_node(dev->parent->fwnode)) {
> + dpmacs = of_find_node_by_name(NULL, "dpmacs");
> + if (!dpmacs)
> + return NULL;
> + parent = of_fwnode_handle(dpmacs);
> + } else if (is_acpi_node(dev->parent->fwnode)) {
> + parent = dev->parent->fwnode;
dev_fwnode(dev->parent) ?
> + }
...
> + if (err) {
> continue;
> + } else if (id == dpmac_id) {
Useless 'else'
> + if (is_of_node(dev->parent->fwnode))
dev_fwnode() ?
> + of_node_put(dpmacs);
> + return child;
> + }
...
> + if (is_of_node(dev->parent->fwnode))
Ditto ?
> + of_node_put(dpmacs);
--
With Best Regards,
Andy Shevchenko
On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
>
> Signed-off-by: Calvin Johnson <[email protected]>
Also, the subject line should be "net: phylink: ..." Consistency is
really appreciated.
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
On Mon, Feb 08, 2021 at 08:42:44PM +0530, Calvin Johnson wrote:
> Modify dpaa2_mac_connect() to support ACPI along with DT.
> Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> DT or ACPI.
>
> Replace of_get_phy_mode with fwnode_get_phy_mode to get
> phy-mode for a dpmac_node.
>
> Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> connect to mac->phylink.
>
> Signed-off-by: Calvin Johnson <[email protected]>
I don't think this does the full job.
> static int dpaa2_pcs_create(struct dpaa2_mac *mac,
> - struct device_node *dpmac_node, int id)
> + struct fwnode_handle *dpmac_node,
> + int id)
> {
> struct mdio_device *mdiodev;
> - struct device_node *node;
> + struct fwnode_handle *node;
>
> - node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
> - if (!node) {
> + node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
> + if (IS_ERR(node)) {
> /* do not error out on old DTS files */
> netdev_warn(mac->net_dev, "pcs-handle node not found\n");
> return 0;
> }
>
> - if (!of_device_is_available(node)) {
> + if (!of_device_is_available(to_of_node(node))) {
If "node" is an ACPI node, then to_of_node() returns NULL, and
of_device_is_available(NULL) is false. So, if we're using ACPI
and we enter this path, we will always hit the error below:
> netdev_err(mac->net_dev, "pcs-handle node not available\n");
> - of_node_put(node);
> + of_node_put(to_of_node(node));
> return -ENODEV;
> }
> @@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> * error out if the interface mode requests them and there is no PHY
> * to act upon them
> */
> - if (of_phy_is_fixed_link(dpmac_node) &&
> + if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
If "dpmac_node" is an ACPI node, to_of_node() will return NULL, and
of_phy_is_fixed_link() will oops.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
On Mon, Feb 08, 2021 at 08:42:36PM +0530, Calvin Johnson wrote:
> +int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> + struct fwnode_handle *child, u32 addr)
> +{
> + struct mii_timestamper *mii_ts;
If you initialise this to NULL...
> + struct phy_device *phy;
> + bool is_c45 = false;
> + u32 phy_id;
> + int rc;
> +
> + if (is_of_node(child)) {
> + mii_ts = of_find_mii_timestamper(to_of_node(child));
> + if (IS_ERR(mii_ts))
> + return PTR_ERR(mii_ts);
> + }
> +
> + rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
> + if (rc >= 0)
> + is_c45 = true;
> +
> + if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> + phy = get_phy_device(bus, addr, is_c45);
> + else
> + phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> + if (IS_ERR(phy)) {
> + if (mii_ts && is_of_node(child))
Then you don't need is_of_node() here.
> + /* phy->mii_ts may already be defined by the PHY driver. A
> + * mii_timestamper probed via the device tree will still have
> + * precedence.
> + */
> + if (mii_ts)
> + phy->mii_ts = mii_ts;
Should this be moved out of the if() case?
I'm thinking of the future where we may end up adding mii timestamper
support for ACPI.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Hi,
Just a couple of nits below:
On 2/8/21 7:12 AM, Calvin Johnson wrote:
> Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
> provide them to be connected to MAC.
>
> Describe properties "phy-handle" and "phy-mode".
>
> Signed-off-by: Calvin Johnson <[email protected]>
> ---
> Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
> 1 file changed, 133 insertions(+)
> create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
>
> diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
> new file mode 100644
> index 000000000000..e1e99cae5eb2
> --- /dev/null
> +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
> @@ -0,0 +1,133 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=========================
> +MDIO bus and PHYs in ACPI
> +=========================
> +
> +The PHYs on an MDIO bus [1] are probed and registered using
> +fwnode_mdiobus_register_phy().
> +
> +Later, for connecting these PHYs to MAC, the PHYs registered on the
to a MAC,
> +MDIO bus have to be referenced.
> +
> +This document introduces two _DSD properties that are to be used
> +for connecting PHYs on the MDIO bus [3] to the MAC layer.
> +
> +These properties are defined in accordance with the "Device
> +Properties UUID For _DSD" [2] document and the
> +daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
> +Data Descriptors containing them.
> +
> +phy-handle
> +----------
...
> +
> +Later, during the MAC driver initialization, the registered PHY devices
> +have to be retrieved from the MDIO bus. For this, the MAC driver need
needs
> +references to the previously registered PHYs which are provided
> +as device object references (e.g. \_SB.MDI0.PHY1).
thanks.
--
~Randy
On Mon, Feb 08, 2021 at 12:01:57PM -0800, Randy Dunlap wrote:
> Hi,
> Just a couple of nits below:
>
> On 2/8/21 7:12 AM, Calvin Johnson wrote:
> > Introduce ACPI mechanism to get PHYs registered on a MDIO bus and
> > provide them to be connected to MAC.
> >
> > Describe properties "phy-handle" and "phy-mode".
> >
> > Signed-off-by: Calvin Johnson <[email protected]>
> > ---
>
> > Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++++
> > 1 file changed, 133 insertions(+)
> > create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
> >
> > diff --git a/Documentation/firmware-guide/acpi/dsd/phy.rst b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > new file mode 100644
> > index 000000000000..e1e99cae5eb2
> > --- /dev/null
> > +++ b/Documentation/firmware-guide/acpi/dsd/phy.rst
> > @@ -0,0 +1,133 @@
> > +.. SPDX-License-Identifier: GPL-2.0
> > +
> > +=========================
> > +MDIO bus and PHYs in ACPI
> > +=========================
> > +
> > +The PHYs on an MDIO bus [1] are probed and registered using
> > +fwnode_mdiobus_register_phy().
> > +
> > +Later, for connecting these PHYs to MAC, the PHYs registered on the
>
> to a MAC,
Each PHY is connected to a MAC. So I'll change it to "PHYs to their respective MACs".
>
> > +MDIO bus have to be referenced.
> > +
> > +This document introduces two _DSD properties that are to be used
> > +for connecting PHYs on the MDIO bus [3] to the MAC layer.
> > +
> > +These properties are defined in accordance with the "Device
> > +Properties UUID For _DSD" [2] document and the
> > +daffd814-6eba-4d8c-8a91-bc9bbf4aa301 UUID must be used in the Device
> > +Data Descriptors containing them.
> > +
> > +phy-handle
> > +----------
>
> ...
>
> > +
> > +Later, during the MAC driver initialization, the registered PHY devices
> > +have to be retrieved from the MDIO bus. For this, the MAC driver need
>
> needs
>
> > +references to the previously registered PHYs which are provided
> > +as device object references (e.g. \_SB.MDI0.PHY1).
>
>
> thanks.
> --
> ~Randy
>
On Mon, Feb 08, 2021 at 05:40:13PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:36PM +0530, Calvin Johnson wrote:
> > +int fwnode_mdiobus_register_phy(struct mii_bus *bus,
> > + struct fwnode_handle *child, u32 addr)
> > +{
> > + struct mii_timestamper *mii_ts;
>
> If you initialise this to NULL...
>
> > + struct phy_device *phy;
> > + bool is_c45 = false;
> > + u32 phy_id;
> > + int rc;
> > +
> > + if (is_of_node(child)) {
> > + mii_ts = of_find_mii_timestamper(to_of_node(child));
> > + if (IS_ERR(mii_ts))
> > + return PTR_ERR(mii_ts);
> > + }
> > +
> > + rc = fwnode_property_match_string(child, "compatible", "ethernet-phy-ieee802.3-c45");
> > + if (rc >= 0)
> > + is_c45 = true;
> > +
> > + if (is_c45 || fwnode_get_phy_id(child, &phy_id))
> > + phy = get_phy_device(bus, addr, is_c45);
> > + else
> > + phy = phy_device_create(bus, addr, phy_id, 0, NULL);
> > + if (IS_ERR(phy)) {
> > + if (mii_ts && is_of_node(child))
>
> Then you don't need is_of_node() here.
>
> > + /* phy->mii_ts may already be defined by the PHY driver. A
> > + * mii_timestamper probed via the device tree will still have
> > + * precedence.
> > + */
> > + if (mii_ts)
> > + phy->mii_ts = mii_ts;
>
> Should this be moved out of the if() case?
>
> I'm thinking of the future where we may end up adding mii timestamper
> support for ACPI.
Right. I'll take case of these in next version.
Thanks
Calvin
On Mon, Feb 08, 2021 at 03:31:11PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> > +int phylink_fwnode_phy_connect(struct phylink *pl,
> > + struct fwnode_handle *fwnode,
> > + u32 flags)
> > +{
> > + struct fwnode_handle *phy_fwnode;
> > + struct phy_device *phy_dev;
> > + int ret;
> > +
> > + if (is_of_node(fwnode)) {
> > + /* Fixed links and 802.3z are handled without needing a PHY */
> > + if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> > + (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> > + phy_interface_mode_is_8023z(pl->link_interface)))
> > + return 0;
>
> This difference between ACPI and DT really needs to be described in the
> commit description.
>
> For example, why is it acceptable to have a PHY in fixed-link mode if
> we're using ACPI, and not DT?
>
> If we look at the phylink code, accepting a PHY when in fixed-link mode
> is basically not supported... so why should ACPI allow this?
DT and ACPI should handle fixed-link in similar manner. I'll remove the OF
check.
Thanks
Calvin
On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:44PM +0530, Calvin Johnson wrote:
> > Modify dpaa2_mac_connect() to support ACPI along with DT.
> > Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
> > DT or ACPI.
> >
> > Replace of_get_phy_mode with fwnode_get_phy_mode to get
> > phy-mode for a dpmac_node.
> >
> > Use helper function phylink_fwnode_phy_connect() to find phy_dev and
> > connect to mac->phylink.
> >
> > Signed-off-by: Calvin Johnson <[email protected]>
>
> I don't think this does the full job.
>
> > static int dpaa2_pcs_create(struct dpaa2_mac *mac,
> > - struct device_node *dpmac_node, int id)
> > + struct fwnode_handle *dpmac_node,
> > + int id)
> > {
> > struct mdio_device *mdiodev;
> > - struct device_node *node;
> > + struct fwnode_handle *node;
> >
> > - node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
> > - if (!node) {
> > + node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
> > + if (IS_ERR(node)) {
> > /* do not error out on old DTS files */
> > netdev_warn(mac->net_dev, "pcs-handle node not found\n");
> > return 0;
> > }
> >
> > - if (!of_device_is_available(node)) {
> > + if (!of_device_is_available(to_of_node(node))) {
>
> If "node" is an ACPI node, then to_of_node() returns NULL, and
> of_device_is_available(NULL) is false. So, if we're using ACPI
> and we enter this path, we will always hit the error below:
>
> > netdev_err(mac->net_dev, "pcs-handle node not available\n");
> > - of_node_put(node);
> > + of_node_put(to_of_node(node));
> > return -ENODEV;
> > }
>
> > @@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
> > * error out if the interface mode requests them and there is no PHY
> > * to act upon them
> > */
> > - if (of_phy_is_fixed_link(dpmac_node) &&
> > + if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
>
> If "dpmac_node" is an ACPI node, to_of_node() will return NULL, and
> of_phy_is_fixed_link() will oops.
I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
int len, err;
const char *managed;
+ if (!np)
+ return false;
+
/* New binding */
dn = of_get_child_by_name(np, "fixed-link");
if (dn) {
Regards
Calvin
On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
<[email protected]> wrote:
> On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
...
> I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
>
> --- a/drivers/net/mdio/of_mdio.c
> +++ b/drivers/net/mdio/of_mdio.c
> @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
> int len, err;
> const char *managed;
>
> + if (!np)
> + return false;
AFAICS this doesn't add anything: all of the of_* APIs should handle
OF nodes being NULL below.
> /* New binding */
> dn = of_get_child_by_name(np, "fixed-link");
> if (dn) {
--
With Best Regards,
Andy Shevchenko
On Mon, Feb 15, 2021 at 5:13 PM Andy Shevchenko
<[email protected]> wrote:
>
> On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
> <[email protected]> wrote:
> > On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
>
> ...
>
> > I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
> >
> > --- a/drivers/net/mdio/of_mdio.c
> > +++ b/drivers/net/mdio/of_mdio.c
> > @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
> > int len, err;
> > const char *managed;
> >
> > + if (!np)
> > + return false;
>
> AFAICS this doesn't add anything: all of the of_* APIs should handle
> OF nodes being NULL below.
>
> > /* New binding */
> > dn = of_get_child_by_name(np, "fixed-link");
> > if (dn) {
Yes, of_get_next_child() and of_get_property() are NULL aware.
So, the check is redundant.
--
With Best Regards,
Andy Shevchenko
On Mon, Feb 15, 2021 at 05:15:36PM +0200, Andy Shevchenko wrote:
> On Mon, Feb 15, 2021 at 5:13 PM Andy Shevchenko
> <[email protected]> wrote:
> >
> > On Mon, Feb 15, 2021 at 2:33 PM Calvin Johnson
> > <[email protected]> wrote:
> > > On Mon, Feb 08, 2021 at 04:28:31PM +0000, Russell King - ARM Linux admin wrote:
> >
> > ...
> >
> > > I think of_phy_is_fixed_link() needs to be fixed. I'll add below fix.
> > >
> > > --- a/drivers/net/mdio/of_mdio.c
> > > +++ b/drivers/net/mdio/of_mdio.c
> > > @@ -439,6 +439,9 @@ bool of_phy_is_fixed_link(struct device_node *np)
> > > int len, err;
> > > const char *managed;
> > >
> > > + if (!np)
> > > + return false;
> >
> > AFAICS this doesn't add anything: all of the of_* APIs should handle
> > OF nodes being NULL below.
> >
> > > /* New binding */
> > > dn = of_get_child_by_name(np, "fixed-link");
> > > if (dn) {
>
> Yes, of_get_next_child() and of_get_property() are NULL aware.
>
> So, the check is redundant.
Yes, all the function calls in of_phy_is_fixed_link() handles NULL properly.
I don't see any way this function can oops.
Regards
Calvin