This series contains a minor simplification of ibmvfc_init_sub_crqs() followed
by a couple fixes for sub-CRQ handling which effect hard reset of the
client/host adapter CRQ pair.
If ibmvfc_init_sub_crqs() fails ibmvfc_probe() simply parrots
registration failure reported elsewhere, and futher
vhost->scsi_scrq.scrq == NULL is indication enough to the driver that it
has no sub-CRQs available. The mq_enabled check can also be moved into
ibmvfc_init_sub_crqs() such that each caller doesn't have to gate the
call with a mq_enabled check. Finally, in the case of sub-CRQ setup
failure setting do_enquiry can be turned off to putting the driver into
single queue fallback mode.
The aforementioned changes also simplify the next patch in the series
that fixes a hard reset issue, by tying a sub-CRQ setup failure and
do_enquiry logic into ibmvfc_init_sub_crqs().
Signed-off-by: Tyrel Datwyler <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 7097028d4cb6..384960036f8b 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5705,17 +5705,21 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
LEAVE;
}
-static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
+static void ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
{
int i, j;
ENTER;
+ if (!vhost->mq_enabled)
+ return;
vhost->scsi_scrqs.scrqs = kcalloc(nr_scsi_hw_queues,
sizeof(*vhost->scsi_scrqs.scrqs),
GFP_KERNEL);
- if (!vhost->scsi_scrqs.scrqs)
- return -1;
+ if (!vhost->scsi_scrqs.scrqs) {
+ vhost->do_enquiry = 0;
+ return;
+ }
for (i = 0; i < nr_scsi_hw_queues; i++) {
if (ibmvfc_register_scsi_channel(vhost, i)) {
@@ -5724,13 +5728,12 @@ static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
kfree(vhost->scsi_scrqs.scrqs);
vhost->scsi_scrqs.scrqs = NULL;
vhost->scsi_scrqs.active_queues = 0;
- LEAVE;
- return -1;
+ vhost->do_enquiry = 0;
+ break;
}
}
LEAVE;
- return 0;
}
static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost)
@@ -5997,11 +6000,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
goto remove_shost;
}
- if (vhost->mq_enabled) {
- rc = ibmvfc_init_sub_crqs(vhost);
- if (rc)
- dev_warn(dev, "Failed to allocate Sub-CRQs. rc=%d\n", rc);
- }
+ ibmvfc_init_sub_crqs(vhost);
if (shost_to_fc_host(shost)->rqst_q)
blk_queue_max_segments(shost_to_fc_host(shost)->rqst_q, 1);
--
2.27.0
A hard reset results in a complete transport disconnect such that the
CRQ connection with the partner VIOS is broken. This has the side effect
of also invalidating the associated sub-CRQs. The current code assumes
that the sub-CRQs are perserved resulting in a protocol violation after
trying to reconnect them with the VIOS. This introduces an infinite loop
such that the VIOS forces a disconnect after each subsequent attempt to
re-register with invalid handles.
Avoid the aforementioned issue by releasing the sub-CRQs prior to CRQ
disconnect, and driving a reinitialization of the sub-CRQs once a new
CRQ is registered with the hypervisor.
fixes: faacf8c5f1d5 ("ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Signed-off-by: Tyrel Datwyler <[email protected]>
---
drivers/scsi/ibmvscsi/ibmvfc.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 384960036f8b..3dd20f383453 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -158,6 +158,9 @@ static void ibmvfc_npiv_logout(struct ibmvfc_host *);
static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *);
static void ibmvfc_tgt_move_login(struct ibmvfc_target *);
+static void ibmvfc_release_sub_crqs(struct ibmvfc_host *);
+static void ibmvfc_init_sub_crqs(struct ibmvfc_host *);
+
static const char *unknown_error = "unknown error";
static long h_reg_sub_crq(unsigned long unit_address, unsigned long ioba,
@@ -926,8 +929,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
unsigned long flags;
struct vio_dev *vdev = to_vio_dev(vhost->dev);
struct ibmvfc_queue *crq = &vhost->crq;
- struct ibmvfc_queue *scrq;
- int i;
+
+ ibmvfc_release_sub_crqs(vhost);
/* Close the CRQ */
do {
@@ -947,16 +950,6 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
memset(crq->msgs.crq, 0, PAGE_SIZE);
crq->cur = 0;
- if (vhost->scsi_scrqs.scrqs) {
- for (i = 0; i < nr_scsi_hw_queues; i++) {
- scrq = &vhost->scsi_scrqs.scrqs[i];
- spin_lock(scrq->q_lock);
- memset(scrq->msgs.scrq, 0, PAGE_SIZE);
- scrq->cur = 0;
- spin_unlock(scrq->q_lock);
- }
- }
-
/* And re-open it again */
rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address,
crq->msg_token, PAGE_SIZE);
@@ -966,6 +959,9 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
dev_warn(vhost->dev, "Partner adapter not ready\n");
else if (rc != 0)
dev_warn(vhost->dev, "Couldn't register crq (rc=%d)\n", rc);
+
+ ibmvfc_init_sub_crqs(vhost);
+
spin_unlock(vhost->crq.q_lock);
spin_unlock_irqrestore(vhost->host->host_lock, flags);
@@ -5692,6 +5688,7 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
free_irq(scrq->irq, scrq);
irq_dispose_mapping(scrq->irq);
+ scrq->irq = 0;
do {
rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address,
--
2.27.0
Reviewed-by: Brian King <[email protected]>
--
Brian King
Power Linux I/O
IBM Linux Technology Center
Reviewed-by: Brian King <[email protected]>
--
Brian King
Power Linux I/O
IBM Linux Technology Center