From: Rafał Miłecki <[email protected]>
Single partition binding is quite common and may be:
1. Used by multiple parsers
2. Extended for more specific cases
Move it to separated file to avoid code duplication.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../mtd/partitions/fixed-partitions.yaml | 33 +------------
.../bindings/mtd/partitions/partition.yaml | 47 +++++++++++++++++++
2 files changed, 48 insertions(+), 32 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/partition.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
index 6d4a3450e064..ea4cace6a955 100644
--- a/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
+++ b/Documentation/devicetree/bindings/mtd/partitions/fixed-partitions.yaml
@@ -27,38 +27,7 @@ properties:
patternProperties:
"@[0-9a-f]+$":
- description: node describing a single flash partition
- type: object
-
- properties:
- reg:
- description: partition's offset and size within the flash
- maxItems: 1
-
- label:
- description: The label / name for this partition. If omitted, the label
- is taken from the node name (excluding the unit address).
-
- read-only:
- description: This parameter, if present, is a hint that this partition
- should only be mounted read-only. This is usually used for flash
- partitions containing early-boot firmware images or data which should
- not be clobbered.
- type: boolean
-
- lock:
- description: Do not unlock the partition at initialization time (not
- supported on all devices)
- type: boolean
-
- slc-mode:
- description: This parameter, if present, allows one to emulate SLC mode
- on a partition attached to an MLC NAND thus making this partition
- immune to paired-pages corruptions
- type: boolean
-
- required:
- - reg
+ $ref: "partition.yaml#"
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/mtd/partitions/partition.yaml b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
new file mode 100644
index 000000000000..e1ac08064425
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/partition.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/partition.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Partition
+
+description: |
+ This binding describes a single flash partition. Each partition must have its
+ relative offset and size specified. Depending on partition function extra
+ properties can be used.
+
+maintainers:
+ - Rafał Miłecki <[email protected]>
+
+properties:
+ reg:
+ description: partition's offset and size within the flash
+ maxItems: 1
+
+ label:
+ description: The label / name for this partition. If omitted, the label
+ is taken from the node name (excluding the unit address).
+
+ read-only:
+ description: This parameter, if present, is a hint that this partition
+ should only be mounted read-only. This is usually used for flash
+ partitions containing early-boot firmware images or data which should
+ not be clobbered.
+ type: boolean
+
+ lock:
+ description: Do not unlock the partition at initialization time (not
+ supported on all devices)
+ type: boolean
+
+ slc-mode:
+ description: This parameter, if present, allows one to emulate SLC mode
+ on a partition attached to an MLC NAND thus making this partition
+ immune to paired-pages corruptions
+ type: boolean
+
+required:
+ - reg
+
+additionalProperties: true
--
2.26.2
From: Rafał Miłecki <[email protected]>
BCM4908 uses fixed partitions layout but function of some partitions may
vary. Some devices use multiple firmware partitions and those partitions
should be marked to let system discover their purpose.
Signed-off-by: Rafał Miłecki <[email protected]>
---
V2: Use enum: [ 1, 2 ] for address & size
Use ^partition@[0-9a-f]+$ pattern ("partition" was added)
Drop unneeded allOf
Add unevaluatedProperties
---
.../partitions/brcm,bcm4908-partitions.yaml | 70 +++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
diff --git a/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
new file mode 100644
index 000000000000..7b113e5e3421
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/partitions/brcm,bcm4908-partitions.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 partitioning
+
+description: |
+ Broadcom BCM4908 CFE bootloader supports two firmware partitions. One is used
+ for regular booting, the other is treated as fallback.
+
+ This binding allows defining all fixed partitions and marking those containing
+ firmware. System can use that information e.g. for booting or flashing
+ purposes.
+
+maintainers:
+ - Rafał Miłecki <[email protected]>
+
+properties:
+ compatible:
+ const: brcm,bcm4908-partitions
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+patternProperties:
+ "^partition@[0-9a-f]+$":
+ $ref: "partition.yaml#"
+ properties:
+ compatible:
+ const: brcm,bcm4908-firmware
+ unevaluatedProperties: false
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ partitions {
+ compatible = "brcm,bcm4908-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "cferom";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x100000 0xf00000>;
+ };
+
+ partition@1000000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x1000000 0xf00000>;
+ };
+
+ partition@1f00000 {
+ label = "calibration";
+ reg = <0x1f00000 0x100000>;
+ };
+ };
--
2.26.2
From: Rafał Miłecki <[email protected]>
BCM4908 partitioning is based on fixed layout but allows specifying
multiple firmware partitions. It requires detecting which firmware
partition was used for booting current kernel.
To support such cases without duplicating a lot of code (without copying
most of the ofpart.c code) support for post-parsing callback was added.
BCM4908 callback simply reads offset of currently used firmware
partition from the DT. Bootloader specifies it using the "brcm_blparms"
property.
Signed-off-by: Rafał Miłecki <[email protected]>
---
drivers/mtd/parsers/Makefile | 1 +
drivers/mtd/parsers/bcm4908-partitions.c | 62 ++++++++++++++++++++++++
drivers/mtd/parsers/bcm4908-partitions.h | 7 +++
drivers/mtd/parsers/ofpart.c | 28 ++++++++++-
4 files changed, 96 insertions(+), 2 deletions(-)
create mode 100644 drivers/mtd/parsers/bcm4908-partitions.c
create mode 100644 drivers/mtd/parsers/bcm4908-partitions.h
diff --git a/drivers/mtd/parsers/Makefile b/drivers/mtd/parsers/Makefile
index 50eb0b0a2210..01972a5edc5c 100644
--- a/drivers/mtd/parsers/Makefile
+++ b/drivers/mtd/parsers/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
+obj-$(CONFIG_MTD_OF_PARTS) += bcm4908-partitions.o
obj-$(CONFIG_MTD_PARSER_IMAGETAG) += parser_imagetag.o
obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
diff --git a/drivers/mtd/parsers/bcm4908-partitions.c b/drivers/mtd/parsers/bcm4908-partitions.c
new file mode 100644
index 000000000000..032a4b1b8a5f
--- /dev/null
+++ b/drivers/mtd/parsers/bcm4908-partitions.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Rafał Miłecki <[email protected]>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+#include <linux/mtd/partitions.h>
+
+#define BLPARAMS_FW_OFFSET "NAND_RFS_OFS"
+
+static long long bcm4908_partitions_fw_offset(void)
+{
+ struct device_node *root;
+ struct property *prop;
+ const char *s;
+
+ root = of_find_node_by_path("/");
+ if (!root)
+ return -ENOENT;
+
+ of_property_for_each_string(root, "brcm_blparms", prop, s) {
+ size_t len = strlen(BLPARAMS_FW_OFFSET);
+ unsigned long offset;
+ int err;
+
+ if (strncmp(s, BLPARAMS_FW_OFFSET, len) || s[len] != '=')
+ continue;
+
+ err = kstrtoul(s + len + 1, 0, &offset);
+ if (err) {
+ pr_err("failed to parse %s\n", s + len + 1);
+ return err;
+ }
+
+ return offset << 10;
+ }
+
+ return -ENOENT;
+}
+
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
+{
+ long long fw_offset;
+ int i;
+
+ fw_offset = bcm4908_partitions_fw_offset();
+
+ for (i = 0; i < nr_parts; i++) {
+ if (of_device_is_compatible(parts[i].of_node, "brcm,bcm4908-firmware")) {
+ if (fw_offset < 0 || parts[i].offset == fw_offset)
+ parts[i].name = "firmware";
+ else
+ parts[i].name = "backup";
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/mtd/parsers/bcm4908-partitions.h b/drivers/mtd/parsers/bcm4908-partitions.h
new file mode 100644
index 000000000000..df25f0487d0a
--- /dev/null
+++ b/drivers/mtd/parsers/bcm4908-partitions.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __BCM4908_PARTITIONS_H
+#define __BCM4908_PARTITIONS_H
+
+int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+
+#endif
diff --git a/drivers/mtd/parsers/ofpart.c b/drivers/mtd/parsers/ofpart.c
index daf507c123e6..6b221df8401c 100644
--- a/drivers/mtd/parsers/ofpart.c
+++ b/drivers/mtd/parsers/ofpart.c
@@ -16,6 +16,18 @@
#include <linux/slab.h>
#include <linux/mtd/partitions.h>
+#include "bcm4908-partitions.h"
+
+struct fixed_partitions_quirks {
+ int (*post_parse)(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts);
+};
+
+struct fixed_partitions_quirks bcm4908_partitions_quirks = {
+ .post_parse = bcm4908_partitions_post_parse,
+};
+
+static const struct of_device_id parse_ofpart_match_table[];
+
static bool node_has_compatible(struct device_node *pp)
{
return of_get_property(pp, "compatible", NULL);
@@ -25,6 +37,8 @@ static int parse_fixed_partitions(struct mtd_info *master,
const struct mtd_partition **pparts,
struct mtd_part_parser_data *data)
{
+ const struct fixed_partitions_quirks *quirks;
+ const struct of_device_id *of_id;
struct mtd_partition *parts;
struct device_node *mtd_node;
struct device_node *ofpart_node;
@@ -33,7 +47,6 @@ static int parse_fixed_partitions(struct mtd_info *master,
int nr_parts, i, ret = 0;
bool dedicated = true;
-
/* Pull of_node from the master device node */
mtd_node = mtd_get_of_node(master);
if (!mtd_node)
@@ -50,11 +63,16 @@ static int parse_fixed_partitions(struct mtd_info *master,
master->name, mtd_node);
ofpart_node = mtd_node;
dedicated = false;
- } else if (!of_device_is_compatible(ofpart_node, "fixed-partitions")) {
+ }
+
+ of_id = of_match_node(parse_ofpart_match_table, ofpart_node);
+ if (dedicated && !of_id) {
/* The 'partitions' subnode might be used by another parser */
return 0;
}
+ quirks = of_id ? of_id->data : NULL;
+
/* First count the subnodes */
nr_parts = 0;
for_each_child_of_node(ofpart_node, pp) {
@@ -126,6 +144,9 @@ static int parse_fixed_partitions(struct mtd_info *master,
if (!nr_parts)
goto ofpart_none;
+ if (quirks && quirks->post_parse)
+ quirks->post_parse(master, parts, nr_parts);
+
*pparts = parts;
return nr_parts;
@@ -140,7 +161,10 @@ static int parse_fixed_partitions(struct mtd_info *master,
}
static const struct of_device_id parse_ofpart_match_table[] = {
+ /* Generic */
{ .compatible = "fixed-partitions" },
+ /* Customized */
+ { .compatible = "brcm,bcm4908-partitions", .data = &bcm4908_partitions_quirks, },
{},
};
MODULE_DEVICE_TABLE(of, parse_ofpart_match_table);
--
2.26.2
Hi "Rafał,
I love your patch! Perhaps something to improve:
[auto build test WARNING on mtd/mtd/next]
[also build test WARNING on mtd/mtd/fixes robh/for-next v5.11-rc7 next-20210211]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/dt-bindings-mtd-move-partition-binding-to-its-own-file/20210212-002803
base: https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
config: x86_64-randconfig-a015-20210209 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project c9439ca36342fb6013187d0a69aef92736951476)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install x86_64 cross compiling tool for clang build
# apt-get install binutils-x86-64-linux-gnu
# https://github.com/0day-ci/linux/commit/4453a81e3dd814c506fc96674433702c2a25a3c8
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Rafa-Mi-ecki/dt-bindings-mtd-move-partition-binding-to-its-own-file/20210212-002803
git checkout 4453a81e3dd814c506fc96674433702c2a25a3c8
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> drivers/mtd/parsers/bcm4908-partitions.c:45:5: warning: no previous prototype for function 'bcm4908_partitions_post_parse' [-Wmissing-prototypes]
int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
^
drivers/mtd/parsers/bcm4908-partitions.c:45:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
^
static
1 warning generated.
vim +/bcm4908_partitions_post_parse +45 drivers/mtd/parsers/bcm4908-partitions.c
44
> 45 int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]
Hi "Rafał,
I love your patch! Perhaps something to improve:
[auto build test WARNING on mtd/mtd/next]
[also build test WARNING on mtd/mtd/fixes robh/for-next v5.11-rc7 next-20210211]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Rafa-Mi-ecki/dt-bindings-mtd-move-partition-binding-to-its-own-file/20210212-002803
base: https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next
config: nds32-randconfig-r014-20210209 (attached as .config)
compiler: nds32le-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/4453a81e3dd814c506fc96674433702c2a25a3c8
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Rafa-Mi-ecki/dt-bindings-mtd-move-partition-binding-to-its-own-file/20210212-002803
git checkout 4453a81e3dd814c506fc96674433702c2a25a3c8
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=nds32
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> drivers/mtd/parsers/bcm4908-partitions.c:45:5: warning: no previous prototype for 'bcm4908_partitions_post_parse' [-Wmissing-prototypes]
45 | int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vim +/bcm4908_partitions_post_parse +45 drivers/mtd/parsers/bcm4908-partitions.c
44
> 45 int bcm4908_partitions_post_parse(struct mtd_info *mtd, struct mtd_partition *parts, int nr_parts)
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]