AR8035 recently gained MDIX support. The same functions will work for
the AR8031/33 PHY. We just need to add the at803x_config_aneg()
callback.
This was tested on a Kontron sl28 board.
Signed-off-by: Michael Walle <[email protected]>
---
drivers/net/phy/at803x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d67bddc111e3..c2aa4c92edde 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1190,6 +1190,7 @@ static struct phy_driver at803x_driver[] = {
.probe = at803x_probe,
.remove = at803x_remove,
.config_init = at803x_config_init,
+ .config_aneg = at803x_config_aneg,
.soft_reset = genphy_soft_reset,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
--
2.20.1