2021-02-17 07:41:03

by Alexandru Ardelean

[permalink] [raw]
Subject: [PATCH v4 2/6] Documentation: iio: add doc for high-speed buffer API

This change takes the comment from the commit that introduces the IIO
high-speed buffer API, and formats it into rst format.

Signed-off-by: Alexandru Ardelean <[email protected]>
---
Documentation/iio/iio_high_speed_buffers.rst | 100 +++++++++++++++++++
Documentation/iio/index.rst | 2 +
include/uapi/linux/iio/buffer.h | 5 +
3 files changed, 107 insertions(+)
create mode 100644 Documentation/iio/iio_high_speed_buffers.rst

diff --git a/Documentation/iio/iio_high_speed_buffers.rst b/Documentation/iio/iio_high_speed_buffers.rst
new file mode 100644
index 000000000000..f326e68efe49
--- /dev/null
+++ b/Documentation/iio/iio_high_speed_buffers.rst
@@ -0,0 +1,100 @@
+===================================
+Industrial IO High-Speed Buffer API
+===================================
+
+1. Overview
+===========
+
+Industrial IO supports access to buffers via an mmap interface. The
+advantage of the mmap based interface compared to the read() based
+interface is that it avoids an extra copy of the data between kernel and
+userspace. This is particular useful for high-speed devices which produce
+several megabytes or even gigabytes of data per second.
+
+The data for the mmap interface is managed at the granularity of so called
+blocks. A block is a contiguous region of memory (at the moment both
+physically and virtually contiguous). Reducing the granularity from byte
+level to block level is done to reduce the userspace-kernelspace
+synchronization overhead since performing syscalls for each byte at a
+data-rate of a few megabytes is not feasible.
+
+This of course leads to a slightly increased latency. For this reason an
+application can choose the size of the blocks as well as how many blocks it
+allocates. E.g. two blocks would be a traditional double buffering scheme.
+But using a higher number might be necessary to avoid underflow/overflow
+situations in the presence of scheduling latencies.
+
+A block can either be owned by kernel space or userspace. When owned by
+userspace it is safe to access the data in the block and process it. When
+owned by kernel space the block can be in one of 3 states:
+
+* It can be in the incoming queue where all blocks submitted from userspace
+ are placed and are waiting to be processed by the kernel driver.
+* It can be currently being processed by the kernel driver, this means it is
+ actively placing capturing data in it (usually using DMA).
+* Or it can be in the outgoing queue where all blocks that have been
+ processed by the kernel are placed. Userspace can dequeue the blocks as
+ necessary.
+
+2. Interface
+============
+
+As part of the interface 5 IOCTLs are used to manage the blocks and exchange
+them between userspace and kernelspace. The IOCTLs can be accessed through
+a open file descriptor to a IIO device.
+
+* **IIO_BUFFER_BLOCK_ALLOC_IOCTL(struct iio_buffer_block_alloc_req *)**:
+ Allocates new blocks. Can be called multiple times if necessary. A newly
+ allocated block is initially owned by userspace.
+
+* **IIO_BUFFER_BLOCK_FREE_IOCTL(void)**:
+ Frees all previously allocated blocks. If the backing memory of a block is
+ still in use by a kernel driver (i.e. active DMA transfer) it will be
+ freed once the kernel driver has released it.
+
+* **IIO_BUFFER_BLOCK_QUERY_IOCTL(struct iio_buffer_block *)**:
+ Queries information about a block. The id of the block about which
+ information is to be queried needs to be set by userspace.
+
+* **IIO_BUFFER_BLOCK_ENQUEUE_IOCTL(struct iio_buffer_block *)**:
+ Places a block on the incoming queue. This transfers ownership of the
+ block from userspace to kernelspace. Userspace must populate the id field
+ of the block to indicate which block to enqueue.
+
+* **IIO_BUFFER_BLOCK_DEQUEUE_IOCTL(struct iio_buffer_block *)**:
+ Removes the first block from the outgoing queue. This transfers ownership
+ of the block from kernelspace to userspace. Kernelspace will populate all
+ fields of the block. If the queue is empty and the file descriptor is set
+ to blocking the IOCTL will block until a new block is available on the
+ outgoing queue.
+
+3. Usage
+========
+
+To access the data stored in a block by userspace the block must be mapped
+to the process's memory. This is done by calling mmap() on the IIO device
+file descriptor. Each block has a unique offset assigned to it which should
+be passed to the mmap interface. E.g.
+
+ mmap(0, block.size, PROT_READ | PROT_WRITE, MAP_SHARED, fd,
+ block.offset);
+
+A typical workflow for the new interface is:
+
+ BLOCK_ALLOC
+
+ foreach block
+ BLOCK_QUERY block
+ mmap block.data.offset
+ BLOCK_ENQUEUE block
+
+ enable buffer
+
+ while !done
+ BLOCK_DEQUEUE block
+ process data
+ BLOCK_ENQUEUE block
+
+ disable buffer
+
+ BLOCK_FREE
diff --git a/Documentation/iio/index.rst b/Documentation/iio/index.rst
index 58b7a4ebac51..aaba78770b47 100644
--- a/Documentation/iio/index.rst
+++ b/Documentation/iio/index.rst
@@ -9,4 +9,6 @@ Industrial I/O

iio_configfs

+ iio_high_speed_buffers
+
ep93xx_adc
diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h
index d18692d14aa5..5ec8a4fa3332 100644
--- a/include/uapi/linux/iio/buffer.h
+++ b/include/uapi/linux/iio/buffer.h
@@ -7,6 +7,11 @@

#include <linux/types.h>

+/**
+ * See for more details:
+ * Documentation/iio/iio_high_speed_buffers.rst
+ */
+
/**
* struct iio_buffer_block_alloc_req - Descriptor for allocating IIO buffer blocks
* @type: type of block(s) to allocate (currently unused, reserved)
--
2.17.1