From: Roderick Colenbrander <[email protected]>
This reverts commit ebbe998a4a52 ("HID: playstation: add
DualSense lightbar support")
There is currently an ongoing discussion on linux-leds LKML,
and so to give us more room, we need to revert those related
patches from linux-next.
This is not a big deal, they are still not pushed to Linus.
Signed-off-by: Roderick Colenbrander <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
---
drivers/hid/Kconfig | 1 -
drivers/hid/hid-playstation.c | 118 ----------------------------------
2 files changed, 119 deletions(-)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index e7f17e78ff14..7ae9eef6ca64 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -857,7 +857,6 @@ config HID_PLAYSTATION
tristate "PlayStation HID Driver"
depends on HID
select CRC32
- select LEDS_CLASS_MULTICOLOR
select POWER_SUPPLY
help
Provides support for Sony PS5 controllers including support for
diff --git a/drivers/hid/hid-playstation.c b/drivers/hid/hid-playstation.c
index 97c1118ba78f..64193fdeaa0d 100644
--- a/drivers/hid/hid-playstation.c
+++ b/drivers/hid/hid-playstation.c
@@ -10,7 +10,6 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/input/mt.h>
-#include <linux/led-class-multicolor.h>
#include <linux/module.h>
#include <asm/unaligned.h>
@@ -100,10 +99,6 @@ struct ps_calibration_data {
/* Flags for DualSense output report. */
#define DS_OUTPUT_VALID_FLAG0_COMPATIBLE_VIBRATION BIT(0)
#define DS_OUTPUT_VALID_FLAG0_HAPTICS_SELECT BIT(1)
-#define DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE BIT(2)
-#define DS_OUTPUT_VALID_FLAG1_RELEASE_LEDS BIT(3)
-#define DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE BIT(1)
-#define DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT BIT(1)
/* DualSense hardware limits */
#define DS_ACC_RES_PER_G 8192
@@ -133,13 +128,6 @@ struct dualsense {
uint8_t motor_left;
uint8_t motor_right;
- /* RGB lightbar */
- struct led_classdev_mc lightbar;
- bool update_lightbar;
- uint8_t lightbar_red;
- uint8_t lightbar_green;
- uint8_t lightbar_blue;
-
struct work_struct output_worker;
void *output_report_dmabuf;
uint8_t output_seq; /* Sequence number for output report. */
@@ -485,45 +473,6 @@ static int ps_get_report(struct hid_device *hdev, uint8_t report_id, uint8_t *bu
return 0;
}
-/* Register a DualSense/DualShock4 RGB lightbar represented by a multicolor LED. */
-static int ps_lightbar_register(struct ps_device *ps_dev, struct led_classdev_mc *lightbar_mc_dev,
- int (*brightness_set)(struct led_classdev *, enum led_brightness))
-{
- struct hid_device *hdev = ps_dev->hdev;
- struct mc_subled *mc_led_info;
- struct led_classdev *led_cdev;
- int ret;
-
- mc_led_info = devm_kmalloc_array(&hdev->dev, 3, sizeof(*mc_led_info),
- GFP_KERNEL | __GFP_ZERO);
- if (!mc_led_info)
- return -ENOMEM;
-
- mc_led_info[0].color_index = LED_COLOR_ID_RED;
- mc_led_info[1].color_index = LED_COLOR_ID_GREEN;
- mc_led_info[2].color_index = LED_COLOR_ID_BLUE;
-
- lightbar_mc_dev->subled_info = mc_led_info;
- lightbar_mc_dev->num_colors = 3;
-
- led_cdev = &lightbar_mc_dev->led_cdev;
- led_cdev->name = devm_kasprintf(&hdev->dev, GFP_KERNEL, "playstation::%pMR::rgb",
- ps_dev->mac_address);
- if (!led_cdev->name)
- return -ENOMEM;
- led_cdev->brightness = 255;
- led_cdev->max_brightness = 255;
- led_cdev->brightness_set_blocking = brightness_set;
-
- ret = devm_led_classdev_multicolor_register(&hdev->dev, lightbar_mc_dev);
- if (ret < 0) {
- hid_err(hdev, "Cannot register multicolor LED device\n");
- return ret;
- }
-
- return 0;
-}
-
static struct input_dev *ps_sensors_create(struct hid_device *hdev, int accel_range, int accel_res,
int gyro_range, int gyro_res)
{
@@ -702,26 +651,6 @@ static int dualsense_get_mac_address(struct dualsense *ds)
return ret;
}
-static int dualsense_lightbar_set_brightness(struct led_classdev *cdev,
- enum led_brightness brightness)
-{
- struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
- struct dualsense *ds = container_of(mc_cdev, struct dualsense, lightbar);
- unsigned long flags;
-
- led_mc_calc_color_components(mc_cdev, brightness);
-
- spin_lock_irqsave(&ds->base.lock, flags);
- ds->update_lightbar = true;
- ds->lightbar_red = mc_cdev->subled_info[0].brightness;
- ds->lightbar_green = mc_cdev->subled_info[1].brightness;
- ds->lightbar_blue = mc_cdev->subled_info[2].brightness;
- spin_unlock_irqrestore(&ds->base.lock, flags);
-
- schedule_work(&ds->output_worker);
- return 0;
-}
-
static void dualsense_init_output_report(struct dualsense *ds, struct dualsense_output_report *rp,
void *buf)
{
@@ -805,15 +734,6 @@ static void dualsense_output_worker(struct work_struct *work)
ds->update_rumble = false;
}
- if (ds->update_lightbar) {
- common->valid_flag1 |= DS_OUTPUT_VALID_FLAG1_LIGHTBAR_CONTROL_ENABLE;
- common->lightbar_red = ds->lightbar_red;
- common->lightbar_green = ds->lightbar_green;
- common->lightbar_blue = ds->lightbar_blue;
-
- ds->update_lightbar = false;
- }
-
spin_unlock_irqrestore(&ds->base.lock, flags);
dualsense_send_output_report(ds, &report);
@@ -998,31 +918,6 @@ static int dualsense_play_effect(struct input_dev *dev, void *data, struct ff_ef
return 0;
}
-static int dualsense_reset_leds(struct dualsense *ds)
-{
- struct dualsense_output_report report;
- uint8_t *buf;
-
- buf = kzalloc(sizeof(struct dualsense_output_report_bt), GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- dualsense_init_output_report(ds, &report, buf);
- /*
- * On Bluetooth the DualSense outputs an animation on the lightbar
- * during startup and maintains a color afterwards. We need to explicitly
- * reconfigure the lightbar before we can do any programming later on.
- * In USB the lightbar is not on by default, but redoing the setup there
- * doesn't hurt.
- */
- report.common->valid_flag2 = DS_OUTPUT_VALID_FLAG2_LIGHTBAR_SETUP_CONTROL_ENABLE;
- report.common->lightbar_setup = DS_OUTPUT_LIGHTBAR_SETUP_LIGHT_OUT; /* Fade light out. */
- dualsense_send_output_report(ds, &report);
-
- kfree(buf);
- return 0;
-}
-
static struct ps_device *dualsense_create(struct hid_device *hdev)
{
struct dualsense *ds;
@@ -1094,19 +989,6 @@ static struct ps_device *dualsense_create(struct hid_device *hdev)
if (ret)
goto err;
- /*
- * The hardware may have control over the LEDs (e.g. in Bluetooth on startup).
- * Reset the LEDs (lightbar, mute, player leds), so we can control them
- * from software.
- */
- ret = dualsense_reset_leds(ds);
- if (ret)
- goto err;
-
- ret = ps_lightbar_register(ps_dev, &ds->lightbar, dualsense_lightbar_set_brightness);
- if (ret)
- goto err;
-
return &ds->base;
err:
--
2.29.2