LinuxLists.cc - [PATCH RESEND v3 2/2] ARM: dts: sun4i: Add support for Topwise A721 tablet

2021-02-16 17:11:10

Subject: [PATCH RESEND v3 2/2] ARM: dts: sun4i: Add support for Topwise A721 tablet

The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
different brands. The mainboard mentions A721 clearly, so this tablet
is best known under this name.

Signed-off-by: Pascal Roeleven <[email protected]>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/sun4i-a10-topwise-a721.dts | 242 +++++++++++++++++++
2 files changed, 244 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/sun4i-a10-topwise-a721.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d1ea0b251..ba25b4235a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1103,7 +1103,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb \
sun4i-a10-pcduino2.dtb \
- sun4i-a10-pov-protab2-ips9.dtb
+ sun4i-a10-pov-protab2-ips9.dtb \
+ sun4i-a10-topwise-a721.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a10s-auxtek-t003.dtb \
sun5i-a10s-auxtek-t004.dtb \
diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
new file mode 100644
index 0000000000..936171d30b
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
@@ -0,0 +1,242 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Pascal Roeleven <[email protected]>
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Topwise A721";
+ compatible = "topwise,a721", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
+ power-supply = <&reg_vbat>;
+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+ brightness-levels = <0 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <8>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ panel: panel {
+ compatible = "starry,kr070pe2t";
+ backlight = <&backlight>;
+ power-supply = <&reg_lcd_power>;
+
+ port {
+ panel_input: endpoint {
+ remote-endpoint = <&tcon0_out_panel>;
+ };
+ };
+ };
+
+ reg_lcd_power: reg-lcd-power {
+ compatible = "regulator-fixed";
+ regulator-name = "reg-lcd-power";
+ gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
+ enable-active-high;
+ };
+
+ reg_vbat: reg-vbat {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+};
+
+&codec {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ axp209: pmic@34 {
+ reg = <0x34>;
+ interrupts = <0>;
+ };
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ mma7660: accelerometer@4c {
+ compatible = "fsl,mma7660";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+
+ ft5406ee8: touchscreen@38 {
+ compatible = "edt,edt-ft5406";
+ reg = <0x38>;
+ interrupt-parent = <&pio>;
+ interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ vcc-supply = <&reg_vcc3v3>;
+ };
+};
+
+&lradc {
+ vref-supply = <&reg_ldo2>;
+ status = "okay";
+
+ button-vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <761904>;
+ };
+
+ button-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <571428>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ vcc-pb-supply = <&reg_vcc3v3>;
+ vcc-pf-supply = <&reg_vcc3v3>;
+ vcc-ph-supply = <&reg_vcc3v3>;
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "okay";
+};
+
+&reg_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+ regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+};
+
+&reg_usb0_vbus {
+ status = "okay";
+};
+
+&reg_usb1_vbus {
+ status = "okay";
+};
+
+&reg_usb2_vbus {
+ status = "okay";
+};
+
+&tcon0_out {
+ tcon0_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb_power_supply {
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+ usb0_vbus-supply = <&reg_usb0_vbus>;
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
+};
--
2.27.0

2021-02-19 11:53:42

by Maxime Ripard

[permalink] [raw]

Subject: Re: [PATCH RESEND v3 2/2] ARM: dts: sun4i: Add support for Topwise A721 tablet

Hi,

On Tue, Feb 16, 2021 at 05:59:54PM +0100, Pascal Roeleven wrote:
> The Topwise A721/LY-F1 tablet is a tablet sold around 2012 under
> different brands. The mainboard mentions A721 clearly, so this tablet
> is best known under this name.
>
> Signed-off-by: Pascal Roeleven <[email protected]>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/sun4i-a10-topwise-a721.dts | 242 +++++++++++++++++++
> 2 files changed, 244 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 3d1ea0b251..ba25b4235a 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1103,7 +1103,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \
> sun4i-a10-olinuxino-lime.dtb \
> sun4i-a10-pcduino.dtb \
> sun4i-a10-pcduino2.dtb \
> - sun4i-a10-pov-protab2-ips9.dtb
> + sun4i-a10-pov-protab2-ips9.dtb \
> + sun4i-a10-topwise-a721.dtb
> dtb-$(CONFIG_MACH_SUN5I) += \
> sun5i-a10s-auxtek-t003.dtb \
> sun5i-a10s-auxtek-t004.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> new file mode 100644
> index 0000000000..936171d30b
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts
> @@ -0,0 +1,242 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 Pascal Roeleven <[email protected]>
> + */
> +
> +/dts-v1/;
> +#include "sun4i-a10.dtsi"
> +#include "sunxi-common-regulators.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> + model = "Topwise A721";
> + compatible = "topwise,a721", "allwinner,sun4i-a10";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>;
> + power-supply = <&reg_vbat>;
> + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
> + brightness-levels = <0 30 40 50 60 70 80 90 100>;
> + default-brightness-level = <8>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + panel: panel {
> + compatible = "starry,kr070pe2t";
> + backlight = <&backlight>;
> + power-supply = <&reg_lcd_power>;
> +
> + port {
> + panel_input: endpoint {
> + remote-endpoint = <&tcon0_out_panel>;
> + };
> + };
> + };
> +
> + reg_lcd_power: reg-lcd-power {
> + compatible = "regulator-fixed";
> + regulator-name = "reg-lcd-power";
> + gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> + enable-active-high;
> + };
> +
> + reg_vbat: reg-vbat {
> + compatible = "regulator-fixed";
> + regulator-name = "vbat";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + };
> +
> +};
> +
> +&codec {
> + status = "okay";
> +};
> +
> +&cpu0 {
> + cpu-supply = <&reg_dcdc2>;
> +};
> +
> +&de {
> + status = "okay";
> +};
> +
> +&ehci0 {
> + status = "okay";
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + axp209: pmic@34 {
> + reg = <0x34>;
> + interrupts = <0>;
> + };
> +};
> +
> +#include "axp209.dtsi"
> +
> +&ac_power_supply {
> + status = "okay";
> +};
> +
> +&battery_power_supply {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +
> + mma7660: accelerometer@4c {

Chances are you don't need that label?

> + compatible = "fsl,mma7660";
> + reg = <0x4c>;
> + };
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + ft5406ee8: touchscreen@38 {

Ditto

> + compatible = "edt,edt-ft5406";
> + reg = <0x38>;
> + interrupt-parent = <&pio>;
> + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + vcc-supply = <&reg_vcc3v3>;
> + };
> +};
> +
> +&lradc {
> + vref-supply = <&reg_ldo2>;
> + status = "okay";
> +
> + button-vol-down {
> + label = "Volume Down";
> + linux,code = <KEY_VOLUMEDOWN>;
> + channel = <0>;
> + voltage = <761904>;
> + };
> +
> + button-vol-up {
> + label = "Volume Up";
> + linux,code = <KEY_VOLUMEUP>;
> + channel = <0>;
> + voltage = <571428>;
> + };

Those two nodes will raise a warning during the DT validation, please
make sure it doesn't have any warning.

Maxime

Attachments:

(No filename) (4.40 kB)
signature.asc (235.00 B)
Download all attachments